Algebra › Section F · Factoring › Topic F.5
Solving polynomial equations
Factoring was the hard work; now comes the reward. Set a factored polynomial equal to zero and it splits into simple equations — this is how quadratics and even cubics get solved without any formula.
The property that does the work
Over the real numbers, a product equals zero only when one of its factors does: if \(ab = 0\), then \(a = 0\) or \(b = 0\). So the equation \((x - 5)(x + 2) = 0\) splits into two one-step equations, \(x - 5 = 0\) or \(x + 2 = 0\), giving \(x = 5\) or \(x = -2\). The property is exclusive to zero. The equation \((x - 5)(x + 2) = 8\) cannot be split — two numbers can multiply to 8 in endless ways — so zero is not a stylistic preference here; it is the whole mechanism.
The standard steps
Solving by factoring follows a fixed rhythm. Move every term to one side so the other side is exactly zero. Factor the non-zero side completely. Set each factor equal to zero and solve those simple equations. For \(x^2 = 6x + 16\): rewrite as \(x^2 - 6x - 16 = 0\), factor to \((x - 8)(x + 2) = 0\), and read off \(x = 8\) or \(x = -2\). No factoring means no progress — which is why the factoring techniques come first in every algebra course.
Worked example: a full quadratic solve
Solve \(x^2 + 4x - 21 = 0\). The equation already equals zero, so factor the left side: two numbers multiplying to \(-21\) and adding to \(4\) are \(7\) and \(-3\), giving \((x + 7)(x - 3) = 0\). The zero product property splits it: \(x + 7 = 0\) or \(x - 3 = 0\), so \(x = -7\) or \(x = 3\). Checking the first solution in the original: \((-7)^2 + 4(-7) - 21 = 49 - 28 - 21 = 0\). Both solutions are real, both check, and the quadratic — degree 2 — delivered exactly two.
Do not divide by the variable
Facing \(x^2 = 4x\), the tempting move is dividing both sides by \(x\), leaving \(x = 4\). But that discards a solution: \(x = 0\) also satisfies the original, and the division erased it, because dividing by \(x\) quietly assumes \(x\) is not zero. The correct path moves everything over first: \(x^2 - 4x = 0\), factor to \(x(x - 4) = 0\), giving \(x = 0\) or \(x = 4\). Never divide both sides by an expression containing the variable — bring it across and factor instead.
Higher degrees, same property
The zero product property does not care how many factors there are. \(x^3 - 4x = 0\) factors as \(x(x^2 - 4) = x(x - 2)(x + 2) = 0\), and each factor contributes its solution: \(x = 0\), \(x = 2\) or \(x = -2\). Three factors, three solutions — and a general limit to match: a polynomial equation of degree \(n\) has at most \(n\) real solutions. Degree also warns against stopping early; a cubic with only one solution found deserves a second, harder look at the factoring.
Zeros and x-intercepts are the same numbers
The solutions of \(p(x) = 0\) go by two names: the zeros of the polynomial and the \(x\)-intercepts of the graph \(y = p(x)\). The graph of \(y = x^2 - x - 12\), which factors as \((x - 4)(x + 3)\), crosses the \(x\)-axis exactly at \(x = 4\) and \(x = -3\), the equation's two solutions. The connection runs both ways: a graph showing three crossings announces three real solutions, and a graph floating above the axis announces that the equation's solutions are not real numbers.
Running the film backwards
If zeros are solutions, zeros can build polynomials. A polynomial with zeros \(3\) and \(-1\) is \((x - 3)(x + 1)\), which expands to \(x^2 - 2x - 3\); setting it to zero recovers \(x = 3\) or \(x = -1\). Any constant multiple, such as \(5(x - 3)(x + 1)\), has the same zeros, because zero times anything is zero — the constant never touches the solutions. This reverse view is how models get fitted to data later: pick the zeros, build the polynomial.
Worked example: a rectangle from its area
A rectangle's length is 5 metres more than its width, and its area is 66 square metres. Let the width be \(w\); the length is \(w + 5\), and the area condition reads \(w(w + 5) = 66\). Expand and set to zero: \(w^2 + 5w - 66 = 0\). The numbers multiplying to \(-66\) and adding to \(5\) are \(11\) and \(-6\): \((w + 11)(w - 6) = 0\), so \(w = -11\) or \(w = 6\). A width of \(-11\) metres is meaningless, so \(w = 6\): width 6 metres, length 11 metres, area \(6 \times 11 = 66\) square metres. Context filters the algebra.
Worked example: a projectile's flight
A ball is thrown upward with height \(h = -5t^2 + 30t\) metres after \(t\) seconds (a simple model that ignores air resistance). It lands when \(h = 0\): factor \(-5t^2 + 30t = -5t(t - 6) = 0\), giving \(t = 0\) (the instant of launch) or \(t = 6\) seconds (the landing). The flight is symmetric, so the peak sits halfway at \(t = 3\): \(h = -5(9) + 30(3) = -45 + 90 = 45\) metres. Two zeros bracket the story — launch and landing — and the zero product property found both in one step.
Common mistakes to avoid
First, splitting an equation that is not set to zero: \((x - 5)(x + 2) = 8\) must be expanded and rearranged first. Second, dividing by the variable and losing \(x = 0\). Third, stopping at a factored form without setting each factor to zero — the factoring is a step, not the answer. Fourth, quitting with fewer solutions than the degree allows without re-checking the factoring, especially missed GCFs like the \(t\) in the projectile. Fifth, reporting solutions the context forbids: negative widths, negative times, and half a person all fail the reality check.
Key takeaways
The zero product property — a product is zero only when a factor is zero — converts a factored equation into simple ones. The routine: set one side to zero, factor completely, set each factor to zero, solve, and check. Never divide by an expression containing the variable; factor it out instead, so degree-\(n\) equations can yield up to \(n\) real solutions. Solutions are the zeros of the polynomial and the \(x\)-intercepts of its graph, and zeros can be used to build polynomials in reverse. In applications, context — never negative lengths or times — gets the final word on which solutions survive.
Flashcards
Flashcard
ab = 0 means a = 0 or b = 0
Test your understanding
Question 1 of 5
Solve (x − 5)(x + 2) = 0.
Question 2 of 5
Solve x² + 4x − 21 = 0 by factoring.
Question 3 of 5
How many real solutions does x³ − 4x = 0 have, and what are they?
Question 4 of 5
What is wrong with solving x² = 5x by dividing both sides by x?
Question 5 of 5
A rectangle's length is 5 m more than its width and its area is 66 m². What are its dimensions?
