Anatomy & Physiology › Section G · The axial and appendicular skeleton › Topic G.5
The pelvic girdle and pelvis
Where the shoulder girdle trades stability for movement, the pelvic girdle does the reverse. Its bones lock tightly to each other and to the spine, forming a firm basin that carries the upper body onto the legs and cradles the pelvic organs.
A girdle built for stability
The pelvic girdle is formed by the two hip bones (coxal bones), one anchoring each lower limb. Each hip bone is joined firmly to the sacrum behind, and the two meet each other in front. The bony pelvis is the whole ring: both hip bones, the sacrum and the coccyx, four bones in all. The pelvis supports the upper body when sitting, transfers its weight to the lower limbs when standing, anchors trunk and limb muscles, and protects the bladder and the internal reproductive organs. Its joints barely move, which is exactly what a weight-bearing foundation needs.
Three bones become one
In a child, each hip bone is three separate bones: the ilium above, the ischium behind and below, and the pubis in front. They meet at a Y-shaped plate of cartilage in the centre of the hip socket and fuse completely during the late teenage years. Their names live on as labels for parts of the adult bone. All three contribute to the acetabulum, the deep, cup-shaped socket on the lateral surface that receives the head of the femur. Below and in front of the acetabulum is the obturator foramen, a large opening between the ischium and pubis that is mostly closed over by a sheet of connective tissue.
The ilium
The ilium is the large, fan-shaped upper part of the hip bone. Its curved upper edge, the iliac crest, is what you feel when you put your hands on your hips. The crest ends in front at the anterior superior iliac spine, a bony point you can feel at the front of the hip, with the anterior inferior iliac spine below it. At the back the crest ends at the posterior superior iliac spine, often marked by a dimple in the skin of the lower back. The smooth inner hollow is the iliac fossa. Behind it, the rough auricular surface meets the sacrum at the sacroiliac joint, and below that the deep greater sciatic notch curves down towards the ischium.
The ischium and the pubis
The ischium forms the posteroinferior part of the hip bone. Its thick, rough ischial tuberosity bears your weight when you sit; these are the sit bones. Above it, the pointed ischial spine separates the greater sciatic notch above from the smaller lesser sciatic notch below. A thin bar, the ischial ramus, runs forwards to meet the pubis. The pubis forms the anterior part. Its body lies near the midline, with a small pubic tubercle on top; its superior pubic ramus runs laterally to the ilium, and its inferior pubic ramus merges with the ischial ramus as one bar, the ischiopubic ramus. The two pubic bodies meet at the pubic symphysis, a joint of fibrocartilage.
Ligaments and sciatic foramina
Strong ligaments lock the pelvis into a ring. Anterior and posterior sacroiliac ligaments bind the sacrum to the ilium on each side, holding the sacroiliac joint almost still. Two more ligaments run from the sacrum to the ischium: the sacrospinous ligament to the ischial spine, and the sacrotuberous ligament to the ischial tuberosity. Besides steadying the sacrum, they turn the two sciatic notches into openings. The greater sciatic foramen is bounded by the greater sciatic notch, the sacrospinous ligament below it and the sacrotuberous ligament behind. The lesser sciatic foramen is bounded by the lesser notch and both ligaments. Nerves, vessels and muscles pass through them to the lower limb; the sciatic nerve uses the greater foramen.
Greater and lesser pelvis
A ring of bone, the pelvic brim, divides the space inside the pelvis into two. Trace the brim from the front: the upper edge of the pubic symphysis, a ridge along the superior pubic ramus, a curved line on the inner ilium, and the sacral promontory at the back. Above the brim lies the broad greater pelvis (false pelvis), flanked by the iliac fans and filled with loops of intestine, effectively part of the abdomen. Below it lies the narrow lesser pelvis (true pelvis), holding the bladder, rectum and internal reproductive organs. The brim encircles the pelvic inlet; the lower opening, the pelvic outlet, is framed by the symphysis, ischiopubic rami, ischial tuberosities, sacrotuberous ligaments and coccyx.
Worked example: following the weight
Trace the load of the upper body to the ground while standing, then while sitting. 1. The trunk's weight descends the vertebral column to L5 and onto the sacrum. 2. The sacrum is wedged between the hip bones, so the weight passes laterally through the two sacroiliac joints into each ilium. 3. From the ilium, thick bone carries the load down to the acetabulum. 4. The acetabulum passes it to the head of the femur and on down the lower limb. 5. When sitting, the path changes at step 3: the load runs down to the ischial tuberosities instead. 6. Check: this is why the sacroiliac ligaments must be so strong.
Female and male pelvis
Pelvises vary between individuals, but on average adult female and male pelvises differ in ways linked to body size and childbirth. A typical female pelvis has lighter, thinner bones, a rounder or oval pelvic inlet, a wider and shallower lesser pelvis, ischial tuberosities set farther apart, a larger pelvic outlet, a wider greater sciatic notch, and a sacrum that is shorter, wider and less curved. Its subpubic angle, where the two ischiopubic rami meet below the symphysis, is usually more than 80 degrees. A typical male pelvis has thicker, heavier bones, a heart-shaped inlet, a deeper, narrower lesser pelvis and a narrower sciatic notch, with a subpubic angle usually under 70 degrees.
Worked example: reading a pelvis
A forensic anthropologist examines an adult hip bone and sacrum from unknown remains. 1. Measure the subpubic angle: about 95 degrees, above the typical female threshold of 80. 2. Inspect the greater sciatic notch: wide and shallow, a typical female feature. 3. Look at the sacrum: short, broad and only gently curved, again typical of a female pelvis. 4. Picture the inlet: rounded rather than heart-shaped. 5. Weigh the evidence: four independent features agree, so the estimate is female with good confidence. 6. Add a caution: each trait varies and the ranges overlap, so experts combine many features, and the pelvis is the most reliable single region of the skeleton for estimating sex.
Common mistakes to avoid
First, calling the pelvic girdle and the pelvis the same thing: the girdle is the two hip bones, while the pelvis adds the sacrum and coccyx. Second, thinking the hip bone stays three bones: the ilium, ischium and pubis fuse in the late teens. Third, saying you sit on the ilium: you sit on the ischial tuberosities. Fourth, mixing up the cavities: the greater (false) pelvis lies above the pelvic brim, the lesser (true) pelvis below. Fifth, treating sex differences as absolute: they are averages with overlap, which is why several traits are checked together.
Key takeaways
The pelvic girdle is the two hip bones; with the sacrum and coccyx they form the pelvis, a stable, weight-bearing ring. Each hip bone forms from the ilium, ischium and pubis, which fuse in the late teens and meet at the acetabulum. Landmarks include the iliac crest and spines, the ischial tuberosity and spine, the pubic symphysis and the obturator foramen. Sacrospinous and sacrotuberous ligaments complete the greater and lesser sciatic foramina. The pelvic brim separates the greater pelvis above from the lesser pelvis below. Female pelvises are on average wider, with a subpubic angle above 80 degrees.
Flashcards
Flashcard
The two hip bones (coxal bones)
Test your understanding
Question 1 of 5
Which bones make up the bony pelvis?
Question 2 of 5
Which part of the hip bone bears the body's weight when a person sits upright?
Question 3 of 5
Which structures together bound the greater sciatic foramen?
Question 4 of 5
What lies below the pelvic brim?
Question 5 of 5
A pelvis has a subpubic angle of about 60°, a narrow sciatic notch and a heart-shaped inlet. What is the best estimate?
