Astronomy › Section L · Analysing starlight and the stellar census › Topic L.2

Colours of stars

Stars are not all white: some glow orange-red, others blue-white. That colour is a thermometer you can read from trillions of kilometres away, and astronomers measure it precisely with filters and a single number called the colour index.

A sky full of colour

Look at Orion on a winter evening and two of its brightest stars clearly differ: Betelgeuse, at one shoulder, is orange-red, while Rigel, at the opposite knee, is blue-white. Many fainter stars show tints of orange, yellow or blue. These colours tell us how hot each star's surface is, one of the basic properties we need before we can understand a star. This topic shows how colour is measured and turned into a temperature.

Colour reveals temperature

A star's surface glows roughly like a blackbody, an ideal object whose spectrum depends only on its temperature. As 'The electromagnetic spectrum' explained, Wien's law gives the wavelength at which a blackbody is brightest:

\lambda_{\max} = \frac{2.90 \times 10^{-3}\ \mathrm{m\,K}}{T}

with \(T\) in kelvin. A hot star peaks at short wavelengths, in the blue or ultraviolet, so blue light dominates its visible output. A cool star peaks in the red or infrared and looks orange or red. A hotter surface also emits more energy per square metre at every wavelength.

Worked example: where three stars peak

Find the peak wavelengths of the Sun (about 5,770 K), Betelgeuse (about 3,600 K) and Rigel (about 12,100 K). 1. Sun: \(\lambda_{\max} = \frac{2.90 \times 10^{-3}}{5770} = 5.03 \times 10^{-7}\) m, or 503 nm, in the blue-green. 2. Betelgeuse: \(\frac{2.90 \times 10^{-3}}{3600} = 8.06 \times 10^{-7}\) m, or 806 nm, just beyond visible red in the near-infrared. 3. Rigel: \(\frac{2.90 \times 10^{-3}}{12{,}100} = 2.40 \times 10^{-7}\) m, or 240 nm, in the ultraviolet. 4. Check: the hottest star has the shortest peak wavelength, matching Rigel's blue-white look and Betelgeuse's orange-red one.

Colour does not depend on distance

Move a star twice as far away and the inverse-square law cuts its flux to a quarter, but it does so equally at every wavelength. The balance between blue and red light stays the same, so the colour stays the same. A red traffic light looks just as red from the far end of a street as from beside it, only fainter. This makes colour far more useful than apparent brightness for learning about the star itself. The main exception is interstellar dust, which scatters blue light more than red and makes distant stars look redder; the topic 'Cosmic dust' returns to this.

Star colours and temperatures

Surface temperatures of stars run from about 2,400 K for the coolest red dwarfs to more than 40,000 K for the hottest blue stars. Approximate examples: red stars near 3,000 to 3,600 K, such as Antares and Betelgeuse; orange stars near 4,300 K, such as Arcturus; yellowish-white stars near 5,770 K, such as the Sun; white stars near 10,000 K, such as Vega and Sirius; and blue-white stars of 12,000 K and more, such as Rigel, with Spica above 20,000 K. Published temperatures for individual stars differ slightly between studies, so treat these as round values.

Why there are no green stars

The Sun's spectrum peaks in the blue-green, yet nobody calls the Sun green. A blackbody spectrum is broad: a star that peaks in the middle of the visible range also gives out plenty of red and blue light, and our eyes blend the mixture into white. Seen from space, the Sun is white. From the ground it looks slightly yellowish because air molecules scatter some blue light out of the direct sunbeam, the same scattering that makes the daytime sky blue. Stars peaking at either end of the visible range look tinted, which is why stellar colours run from red through white to blue, but never green.

Measuring colour with filters

The eye is a poor judge of faint colours, so astronomers measure brightness through standard filters, each passing one band of wavelengths. The most widely used set is the UBV system introduced by Harold Johnson and William Morgan in 1953: U (ultraviolet) is centred near 365 nm, B (blue) near 440 nm and V (visual, yellow-green) near 550 nm. Each measurement is expressed as a magnitude, so a star has a U magnitude, a B magnitude and a V magnitude. Like all magnitudes, a smaller number means more light in that band.

The colour index

A colour index is the difference between two filter magnitudes, most often \(B - V\). The zero point is chosen so that stars like Vega, near 10,000 K, have \(B - V \approx 0\). Because magnitudes run backwards, a negative index means the star gives more light in B than such a star does, so it is bluer and hotter; a positive index means it is redder and cooler. Values run from about −0.3 for the hottest stars to about +2 for the reddest. Roughly, +0.65 matches about 5,770 K (the Sun), +1.2 about 4,300 K and +1.6 about 3,300 K for a main-sequence star. For very hot stars the index changes little with temperature, so other methods are needed there.

Worked example: reading two colour indices

Star 1 has \(B = 5.32\) and \(V = 4.12\); star 2 has \(B = 2.10\) and \(V = 2.25\). 1. Star 1: \(B - V = 5.32 - 4.12 = +1.20\). It is fainter in blue than in visual light, compared with a zero-index star. 2. Convert to a ratio: relative to such a star, its blue-to-visual light is \(10^{-0.4 \times 1.20} = 0.331\), about a third. It is an orange star, near 4,300 K and cooler than the Sun. 3. Star 2: \(B - V = 2.10 - 2.25 = -0.15\), slightly negative, so it is bluer than Vega and hotter than 10,000 K. 4. Check: the larger, positive index belongs to the cooler star, as it should.

Why colours are so useful

Colours are quick to measure. A broad filter collects a large share of a star's light, so even faint stars can be measured, and one camera image through each filter gives colours for thousands of stars at once. Their limits are interstellar reddening, which makes a star look cooler than it is, and the insensitivity of \(B - V\) for the hottest stars. Spreading starlight into a full spectrum, the subject of the next topic, gives a finer and more reliable classification.

Common mistakes to avoid

First, thinking a bigger colour index means a hotter star: it is the opposite, because magnitudes run backwards. Second, subtracting the wrong way round: the index is \(B - V\), the bluer filter minus the redder one. Third, assuming a star that peaks in the green must look green: a broad spectrum looks white. Fourth, thinking a distant star looks redder simply because it is far away: distance alone dims all colours equally, and only dust reddens. Fifth, using Celsius in Wien's law instead of kelvin.

Key takeaways

A star's colour measures its surface temperature: hot stars are blue-white, cool stars orange-red. Wien's law, λmax = 2.90 × 10⁻³ m K / T, gives the peak wavelength. Colour does not change with distance, though interstellar dust can redden starlight. Stellar temperatures run from about 2,400 K to over 40,000 K. Astronomers measure colour with filters such as U, B and V; the colour index B − V is about 0 near 10,000 K, about +0.65 for the Sun, negative for hotter stars and positive for cooler ones.

Flashcards

Flashcard

Colour and temperature

Blue-white stars are hot; orange-red stars are cool

Colour is a surface thermometer.

Test your understanding

Question 1 of 5

A star's surface temperature is 7,250 K. Using Wien's law, at what wavelength is its emission brightest?

Question 2 of 5

Star P has B − V = +1.4 and star Q has B − V = −0.2. Which star is hotter, and why?

Question 3 of 5

Why does a star's colour stay the same if it is moved much farther away from us, ignoring dust?

Question 4 of 5

A star has B = 6.85 and V = 6.20. What is its colour index, and what kind of star does it suggest?

Question 5 of 5

The Sun's spectrum peaks in the blue-green. Why does the Sun look white, not green, from space?

← Previous topicNext topic →