Biology › Section O · Hormones, bones, and muscles › Topic O.6

Joints and skeletal movement

A skeleton of rigid bones can only move where bones meet. The design of each joint decides how far, and in which directions, a body part can move, and the muscles pulling across it decide when.

Where bones meet

A joint, or articulation, is any place where two or more bones meet. Every joint trades mobility against stability: skull bones barely move, protecting the brain, while the shoulder swings through a huge range but dislocates more easily than almost any other joint. The structural classification asks what holds the bones together and whether a cavity separates them, giving fibrous, cartilaginous and synovial joints, plus bony joints where bones have fused, as in an adult hip bone. The functional classification asks how much movement the joint allows.

Fibrous and cartilaginous joints

In fibrous joints, dense connective tissue binds the bones and there is no cavity. Sutures are the tight, interlocking seams between skull bones. Syndesmoses join bones with a longer band or sheet of fibres, allowing a little give, as between the lower ends of the tibia and fibula. A gomphosis anchors a tooth in its socket by the periodontal ligament. In cartilaginous joints, cartilage joins the bones. A synchondrosis uses hyaline cartilage, as in a child's growth plates or where the first rib meets the sternum. A symphysis uses a pad of fibrocartilage, as in the discs between vertebral bodies and the pubic symphysis at the front of the pelvis.

Inside a synovial joint

In a synovial joint, and no other kind, a space separates the bones: the joint cavity. An articular capsule encloses it: an outer fibrous layer resists dislocation, and an inner synovial membrane secretes synovial fluid, which lubricates the joint and nourishes its cartilage. The bone ends are capped with smooth hyaline articular cartilage, and ligaments reinforce the capsule. The knee, elbow, shoulder and hip are synovial. They move most freely, but the freer the joint, the less stable it is. Osteoarthritis wears away articular cartilage; rheumatoid arthritis is an autoimmune attack on the synovial membrane.

Classifying by function

The functional scheme has three classes. A synarthrosis is immovable: sutures, gomphoses and synchondroses belong here. An amphiarthrosis allows slight movement: syndesmoses and symphyses. A diarthrosis moves freely, and every synovial joint is a diarthrosis. So the fibrous and cartilaginous groups each contain both an immovable and a slightly movable type. Slight movement still matters: each intervertebral symphysis bends only a little, but across the 23 discs of the spine the small movements add up to a flexible back, and the discs cushion each step.

Worked example: classifying joints two ways

Classify four joints by structure and by function. 1. The seam between the two parietal bones of the skull: fibres hold interlocking edges, with no cavity, so it is a fibrous suture and a synarthrosis. 2. A molar in its socket: bound by the periodontal ligament, so a fibrous gomphosis, and a synarthrosis. 3. The pubic symphysis: a fibrocartilage pad joins the hip bones, so it is a cartilaginous symphysis and an amphiarthrosis, which is why it can widen slightly during childbirth. 4. The knee: a fluid-filled cavity inside a capsule, so it is synovial and a diarthrosis. 5. Check: the only freely movable joints are the ones with a cavity.

Gliding, angular and rotational movement

Synovial joints produce four kinds of movement. Gliding is flat surfaces sliding past one another, as between wrist bones. Angular movements change the angle between bones. Flexion decreases it (bending the elbow); extension increases it (straightening it); hyperextension carries extension past the normal standing position, as when tipping the head back to look up. Abduction moves a limb away from the body's midline, such as raising an arm sideways; adduction brings it back. Circumduction combines these so the limb traces a cone, as in arm circles. Rotation turns a bone around its own long axis: medial rotation turns it toward the midline, lateral rotation away.

Special movements

Some movements have their own names. Inversion turns the sole of the foot inward; eversion turns it outward. Dorsiflexion lifts the toes towards the shin, and plantar flexion points them down, as in standing on tiptoe. Protraction pushes a bone forward, like jutting the jaw, and retraction pulls it back. Elevation raises a bone, as in shrugging the shoulders, and depression lowers it. Supination turns the forearm so the palm faces forward, or up when the elbow is bent; pronation turns it backward or down, the radius crossing over the ulna. Opposition brings the thumb tip to the other fingertips, allowing a precise grip.

Six shapes of synovial joint

The shapes of the bone surfaces set what a synovial joint can do. Planar joints have flat faces that glide, as between the carpals. Hinge joints let a rounded end swing in one plane, like a door: the elbow, with the knee a modified hinge. Pivot joints let one bone rotate within a ring formed by another: the axis turning within the atlas lets you shake your head, and a pivot near the elbow lets the radius rotate during pronation. Condyloid joints fit an oval end into an oval hollow, allowing movement in two planes, as at the wrist and knuckles. Saddle joints, like the base of the thumb, move in two planes more freely. Ball-and-socket joints, the shoulder and hip, move in every direction and rotate.

Muscles pull in antagonistic pairs

A muscle can only pull. It shortens when it contracts and must be stretched back out by something else, so skeletal muscles are arranged in antagonistic pairs on opposite sides of a joint. Tendons attach muscle to bone; ligaments join bone to bone. Across the elbow, the biceps brachii on the front flexes the joint and the triceps brachii on the back extends it; while one contracts, the other relaxes. Bones act as levers pivoting at joints, so a short contraction near the elbow swings the hand through a long arc. Walking and swimming are sequences of such paired pulls.

Worked example: analysing a kick

Break a football kick into joint actions. 1. Wind-up: the hip extends, swinging the thigh back, and the knee flexes as the hamstrings at the back of the thigh contract. 2. Strike: the hip flexes, driving the thigh forward at the ball-and-socket joint. 3. The quadriceps on the front of the thigh contract and the knee, a hinge, extends; the hamstrings, their antagonists, relax. 4. The ankle plantar flexes so the top of the foot meets the ball. 5. Check: each joint moved only as its shape allows, and each movement had an antagonist ready to reverse it.

Common mistakes to avoid

First, tendons and ligaments are not interchangeable: tendons join muscle to bone, ligaments join bone to bone. Second, flexion is not just bending forward: it is any decrease in the angle at a joint, so bending the knee to lift the heel behind you is knee flexion. Third, shaking the head uses the pivot between atlas and axis; nodding uses a different joint between the atlas and the skull. Fourth, the pubic symphysis and the discs of the spine are cartilaginous joints, not synovial: they have no cavity. Fifth, a muscle never pushes a bone back into place; its antagonist pulls it there.

Key takeaways

Joints are classified by structure (fibrous, cartilaginous, synovial or fused bone) and by function (synarthrosis, amphiarthrosis, diarthrosis). Synovial joints have a fluid-filled cavity, articular cartilage and a capsule, and move most freely at the cost of stability. Their movements are gliding, angular, rotational and special; their six shapes run from the one-plane hinge and pivot, through two-plane condyloid and saddle joints and gliding planar joints, to the all-direction ball-and-socket. Muscles only pull, so they work in antagonistic pairs, such as the biceps and triceps.

Flashcards

Flashcard

Joint (articulation)

Any place where two or more bones meet

Mobility is traded against stability.

Test your understanding

Question 1 of 5

Which feature is found only in synovial joints?

Question 2 of 5

How is the pubic symphysis classified by structure and by function?

Question 3 of 5

Shaking your head to say no uses which type of synovial joint?

Question 4 of 5

A ballet dancer rises onto the tips of her toes. Which movement is happening at the ankle?

Question 5 of 5

Why are skeletal muscles arranged in antagonistic pairs?

← Previous topicNext topic →