Intro to Business › Section G · Organizational structure › Topic G.4
Authority and centralization
Once jobs are grouped into departments, managers must decide who reports to whom, how many people each manager oversees and where decisions are made. These choices about authority, span of control and centralisation shape how fast and how well an organisation works.
Relationships inside the structure
Departmentalisation, covered in the topic Building an organizational structure, decides which jobs belong together. It does not yet say how many layers of management the firm needs, who answers to whom, or how much decision-making power each manager holds. Those questions define the relationships within the structure. The managerial hierarchy, or management pyramid, is the set of management levels in an organisation, usually top, middle and supervisory. Each unit is supervised by a manager in the unit above. Formal power is greatest at the top and shrinks at each level down, while the number of people grows. Some firms, however, deliberately run with very few layers or none.
Chain of command and unity of command
The chain of command is the line of authority running from the top of the organisation to the bottom, making clear who reports to whom. It can be traced on the organisation chart from the chief executive down to the employees who produce goods and services. Henri Fayol's principle of unity of command, from his 1916 list, says each person should report to and take instructions from only one boss. Together, these give everyone clear direction and help coordinate people doing different jobs. A matrix structure, as the topic Matrix, team, and other contemporary structures showed, breaks unity of command on purpose, which is one source of its confusion.
Authority, delegation and accountability
Authority is legitimate power, granted by the organisation and accepted by employees, to request action and expect it to be carried out. The sociology topic Power and authority explores the wider idea. Using authority involves deciding and then following through until the decision is acted on. Managers delegate, assigning some authority and responsibility to people below them. Delegation makes subordinates accountable to their supervisor; accountability means answering for outcomes. Authority and responsibility move down the hierarchy as work is delegated, while accountability moves up: each manager remains answerable for the results of the people beneath. Delegating a task does not remove a manager's accountability for it.
Span of control
A manager's span of control (sometimes called span of management) counts the employees who report directly to that manager. A narrow span allows close control, familiarity with each person and fast feedback, but it needs more managers and more levels, which raises costs, slows decisions, distances top managers from front-line work and discourages autonomy. A wide span needs fewer managers and levels, which cuts costs, speeds decisions, increases flexibility and can raise satisfaction through empowerment. Its risks are weaker control, managers who barely know their staff, too little support for each person and poor coordination. The right span is a balance, not a maximum.
What sets the right span
Five factors are commonly used to judge the best span. 1. The task: the more complex and varied the work, the narrower the span; a supervisor of identical warehouse jobs can manage far more people than a research director overseeing specialist chemists. 2. Location: the more places the workers are spread across, the narrower the span. 3. Ability to delegate: the more a manager can delegate, the wider the span. 4. Interaction needed: the more feedback and contact the work requires, the narrower the span. 5. Skill and motivation of workers: the more skilled and motivated they are, the wider the span can be.
Worked example: span and layers
A firm has 4,096 front-line employees. Compare a span of 8 with a span of 16 at every level. 1. Span 8: supervisors \(4{,}096 \div 8 = 512\); then \(512 \div 8 = 64\); then \(64 \div 8 = 8\); then \(8 \div 8 = 1\). That is 4 management levels and \(512 + 64 + 8 + 1 = 585\) managers. 2. Span 16: \(4{,}096 \div 16 = 256\); \(256 \div 16 = 16\); \(16 \div 16 = 1\). That is 3 levels and \(256 + 16 + 1 = 273\) managers. 3. Doubling the span removes one layer and \(585 - 273 = 312\) managers. 4. But each supervisor now has 16 direct reports, so the work must suit wide spans.
Centralisation
The last structural decision is where decisions are made. Centralisation describes how far formal decision-making power is gathered in a single place or level, usually the top. In a highly centralised firm, top management makes most key decisions with little input from lower levels. This gives top managers a broad view of operations, allows tight financial control, ensures consistency, for example identical prices and standards in every branch, and can cut costs by removing duplicated effort. The drawbacks are that lower-level staff get little chance to develop decision-making and leadership skills, and the organisation responds more slowly to local customers and conditions.
Decentralisation
Decentralisation moves decision-making power down the hierarchy, letting lower-level staff make and carry out more decisions themselves. It can bring quicker decisions, more innovation, greater flexibility, faster development of junior managers and higher job satisfaction and commitment. It is not risk-free: staff without the skills or training may make costly mistakes, and separate units may duplicate effort, communicate poorly or pursue competing objectives. Decentralisation tends to suit organisations that are very large, operate in fast-changing environments, have managers willing to share power and employees willing and able to accept it, or are spread across many locations.
Worked example: centralise or decentralise?
A chain of 120 hardware stores across three countries must decide who sets each store's product range and prices. 1. Size: large, which favours decentralising. 2. Environment: local demand varies with climate and building codes, and competitors change prices weekly, which favours quick local decisions. 3. Geography: three countries, which favours decentralising. 4. People: store managers are experienced and want more say. 5. Counter-argument: buying power and brand consistency favour central control. 6. A balanced decision: centralise purchasing contracts and brand standards, and decentralise each store's range within an approved list, plus local price matching up to an agreed limit. Many real firms mix the two in this way.
Common mistakes to avoid
First, thinking delegation passes accountability downwards: authority and responsibility move down, but accountability moves up. Second, assuming the widest possible span is always best; it saves managers only while each person still gets enough support. Third, reversing the factors: complex tasks and scattered locations need narrower spans, not wider ones. Fourth, forgetting to keep dividing level by level when counting managers for a given span. Fifth, treating centralisation and decentralisation as an all-or-nothing choice; most firms centralise some decisions, such as finance or brand, and decentralise others.
Key takeaways
The managerial hierarchy sets the levels of management. The chain of command shows who reports to whom, and unity of command says each person should have one boss. Authority is legitimate power to expect compliance; delegation passes authority and responsibility down, while accountability moves up. Span of control is the number of direct reports: narrow spans give control but cost more layers; wide spans cut costs and speed decisions but weaken support. Complex tasks, scattered locations and heavy interaction narrow the span; delegation and skilled, motivated staff widen it. Centralisation concentrates decisions at the top; decentralisation pushes them down.
Flashcards
Flashcard
The levels of management in an organisation
Test your understanding
Question 1 of 5
A firm has 1,000 front-line employees and uses a span of control of 10 at every level. How many managers does it need in total?
Question 2 of 5
A manager delegates the preparation of a budget to an assistant, who makes a serious error. Who is accountable to the manager's own boss?
Question 3 of 5
Which situation calls for the narrowest span of control?
Question 4 of 5
Which is an advantage of centralisation?
Question 5 of 5
Under the unity of command principle, how many bosses should each employee report to?
