Calculus › Section K · Conics, parametric equations, and polar coordinates › Topic K.3
Calculus with parametric equations
Once a curve is written parametrically, the whole calculus toolkit comes along: slopes and tangent lines from a ratio of two derivatives, plus arc length and surface area formulas that adapt naturally to motion.
Slope without eliminating the parameter
Suppose a curve is given by \(x = f(t)\), \(y = g(t)\) and you want the slope \(\frac{dy}{dx}\) at some point. You could eliminate the parameter and differentiate, but there is a direct route. The chain rule says \(\frac{dy}{dt} = \frac{dy}{dx} \cdot \frac{dx}{dt}\), and dividing both sides by \(\frac{dx}{dt}\) gives
whenever \(\frac{dx}{dt} \ne 0\). The slope is just the rate of vertical change divided by the rate of horizontal change, which is exactly what slope has always meant. If \(t\) is time, this is vertical velocity over horizontal velocity.
Worked example: a tangent line
Find the tangent line to \(x = 2t\), \(y = t^2 - 4\) at the point where \(t = 1\). First locate the point: \(x = 2\), \(y = 1 - 4 = -3\). Next compute the derivatives: \(\frac{dx}{dt} = 2\) and \(\frac{dy}{dt} = 2t\). So
and at \(t = 1\) the slope is 1. The tangent line is \(y + 3 = 1(x - 2)\), or \(y = x - 5\). As a check, eliminating the parameter gives \(t = \frac{x}{2}\), so \(y = \frac{x^2}{4} - 4\), and differentiating that directly gives \(\frac{x}{2}\), which equals 1 at \(x = 2\). The two methods agree, as they must.
Horizontal and vertical tangents
The ratio \(\frac{dy}{dx} = \frac{dy/dt}{dx/dt}\) shows when a parametric curve flattens out or turns straight up. If \(\frac{dy}{dt} = 0\) while \(\frac{dx}{dt} \ne 0\), the slope is 0 and the tangent line is horizontal. If \(\frac{dx}{dt} = 0\) while \(\frac{dy}{dt} \ne 0\), the slope is undefined and the tangent line is vertical. For \(x = 2t\), \(y = t^2 - 4\), \(\frac{dy}{dt} = 2t\) vanishes only at \(t = 0\), giving a horizontal tangent at the vertex \((0, -4)\), while \(\frac{dx}{dt} = 2\) never vanishes, so there are no vertical tangents. If both vanish at the same \(t\), the ratio tells you nothing and the point needs a closer look.
The second derivative
For concavity you need \(\frac{d^2y}{dx^2}\), and the trap is that it is not \(\frac{d^2y/dt^2}{d^2x/dt^2}\). The correct meaning is the derivative of \(\frac{dy}{dx}\) with respect to \(x\). Since \(\frac{dy}{dx}\) is naturally a function of \(t\), differentiate it with respect to \(t\) and then divide by \(\frac{dx}{dt}\):
For \(x = 2t\), \(y = t^2 - 4\), we found \(\frac{dy}{dx} = t\). Its \(t\)-derivative is 1, and dividing by \(\frac{dx}{dt} = 2\) gives \(\frac{d^2y}{dx^2} = \frac{1}{2}\). Check against the eliminated form \(y = \frac{x^2}{4} - 4\): its second derivative is also \(\frac{1}{2}\), constant and positive, so the parabola opens upward everywhere.
Arc length of a parametric curve
Earlier, arc length was built by chopping a curve into tiny pieces, each close to a straight segment. With parametric equations the natural chopping is in \(t\): as \(t\) advances a little, the point moves \(\frac{dx}{dt}\,dt\) across and \(\frac{dy}{dt}\,dt\) up, so the tiny piece of curve has length \(\sqrt{\left(\frac{dx}{dt}\right)^2 + \left(\frac{dy}{dt}\right)^2}\,dt\) by the Pythagorean theorem. Adding the pieces gives the arc length formula
valid when both derivatives are continuous and the curve is traced exactly once as \(t\) runs from \(a\) to \(b\); a curve traced twice would be counted twice. The expression inside the root is the squared speed of the moving point, so distance travelled is the integral of speed.
Worked example: quarter circle length
Find the length of \(x = 3\cos t\), \(y = 3\sin t\) for \(0 \le t \le \frac{\pi}{2}\). The derivatives are \(\frac{dx}{dt} = -3\sin t\) and \(\frac{dy}{dt} = 3\cos t\), so
The square root is a constant 3, and \(s = \int_0^{\pi/2} 3\,dt = \frac{3\pi}{2} \approx 4.71\). This had to be the answer: the curve is a quarter of a circle of radius 3, and a full circumference is \(2\pi \cdot 3 = 6\pi\), so a quarter is \(\frac{3\pi}{2}\). When a parametric integral simplifies like this, always check it against a geometry fact you already trust.
Surfaces of revolution, parametric form
Revolve a parametric curve about the x-axis and ask for the surface area. Each tiny piece of curve sweeps a thin band. The band's slant height is the same little piece of arc length as before, and its radius is the height \(y\) of the curve above the axis, so its area is about \(2\pi y\) times the piece length. Adding bands gives
Revolving about the y-axis instead swaps the radius: the factor \(y\) becomes \(x\). The formula is easiest to remember as circumference times slant height, summed.
Worked example: the surface of a sphere
Revolve the semicircle \(x = 3\cos t\), \(y = 3\sin t\) for \(0 \le t \le \pi\) about the x-axis and compute the surface area. From the previous example the square root is 3, so
The semicircle has radius 3, so it sweeps out a sphere of radius 3, whose known surface formula \(4\pi r^2\) gives \(36\pi\). The match confirms both the integral and the geometry. Notice the radius factor is \(y\), positive throughout because \(\sin t \ge 0\) on \([0, \pi]\); if the curve dipped below the axis you would need \(|y|\) to keep every band's radius non-negative.
Common mistakes to avoid
The classic error on the second derivative is dividing \(\frac{d^2y}{dt^2}\) by \(\frac{d^2x}{dt^2}\): that fraction has no meaning as a slope. Differentiate the whole ratio \(\frac{dy}{dx}\) with respect to \(t\), then divide by \(\frac{dx}{dt}\). The second is forgetting the square root in the arc length integral or dropping the squares inside it. The third is quoting a horizontal tangent where \(\frac{dx}{dt}\) is also 0: if both derivatives vanish, the ratio \(\frac{dy}{dx}\) is simply undefined at that \(t\) and needs separate analysis.
Key takeaways
For \(x = f(t)\), \(y = g(t)\), the slope is \(\frac{dy}{dx} = \frac{dy/dt}{dx/dt}\) when \(\frac{dx}{dt} \ne 0\); horizontal tangents come from \(\frac{dy}{dt} = 0\) and vertical ones from \(\frac{dx}{dt} = 0\), provided the other rate is nonzero. The second derivative is the \(t\)-derivative of the slope ratio divided by \(\frac{dx}{dt}\). Arc length integrates the speed: \(s = \int \sqrt{\left(\frac{dx}{dt}\right)^2 + \left(\frac{dy}{dt}\right)^2}\,dt\), and the surface of revolution about the x-axis multiplies the same integrand by \(2\pi y\). Wherever possible, check results against known geometry like circles and spheres.
Flashcards
Flashcard
dy/dx = (dy/dt) ÷ (dx/dt)
Test your understanding
Question 1 of 5
For the curve x = 3t, y = t², what is dy/dx at t = 2?
Question 2 of 5
For a curve with dx/dt = t² − 4 and dy/dt = t³, at which t is the tangent line horizontal (with the other rate nonzero)?
Question 3 of 5
For x = 2t, y = t² − 4, what is d²y/dx²?
Question 4 of 5
What is the arc length of x = 3 cos t, y = 3 sin t from t = 0 to t = π/2?
Question 5 of 5
Revolving x = 3 cos t, y = 3 sin t, 0 ≤ t ≤ π about the x-axis gives a sphere of radius 3. What surface area does the parametric formula produce?
Standards: 9 (BC)
