Calculus › Section K · Conics, parametric equations, and polar coordinates › Topic K.2

Plane curves and parametric equations

A single equation in x and y describes a curve, but not the journey along it. Parametric equations add a third variable, often time, so a point's full path, direction and speed become visible in the algebra.

One equation is not enough

The equation \(y = x^2\) tells you which points lie on a curve, but it is silent about motion. When does the moving point pass through \((1, 1)\)? Which end did it start from? To describe a path as a journey, you introduce a third variable, usually called \(t\), and give the position as two functions of it:

x = f(t), \quad y = g(t)

These are parametric equations, \(t\) is the parameter, and the set of points \((x, y)\) traced out as \(t\) runs through an interval is a plane curve. This matches how physics reports motion anyway: a tracked object gives its position at each time, not a formula for \(y\) in terms of \(x\).

Sketching by plotting points

To sketch a plane curve, make a table of a few \(t\)-values, compute \(x\) and \(y\) for each, plot the points, and join them in order of increasing \(t\). Take \(x = t - 1\) and \(y = t^2\) for \(-2 \le t \le 2\). The values \(t = -2, -1, 0, 1, 2\) give the points \((-3, 4)\), \((-2, 1)\), \((-1, 0)\), \((0, 1)\) and \((1, 4)\). The curve is a parabola traced from left to right, with its low point \((-1, 0)\) reached at \(t = 0\). Adding arrows in the direction of increasing \(t\) records the orientation, which is genuine information the parametric form carries and a plain \(y\)-versus-\(x\) equation does not.

Eliminating the parameter

Often you want the familiar \(y\)-versus-\(x\) equation of the curve. To find it, eliminate the parameter: solve one equation for \(t\) and substitute into the other. For \(x = 2t - 3\) and \(y = 2t + 1\), the first gives \(t = \frac{x + 3}{2}\), and substituting yields \(y = x + 4\), a straight line. For \(x = \cos t\) and \(y = \sin t\), no solving is needed: use the identity \(\cos^2 t + \sin^2 t = 1\) to get \(x^2 + y^2 = 1\), the unit circle, traced counterclockwise once as \(t\) runs from \(0\) to \(2\pi\). Trigonometric identities do the elimination whenever \(t\) appears inside sine and cosine.

Worked example: eliminating a parameter

Analyse \(x = 2t + 1\), \(y = t^2 - 3\). Solve the first equation for the parameter: \(t = \frac{x - 1}{2}\). Substituting into the second gives

y = \left(\frac{x - 1}{2}\right)^2 - 3

a parabola opening upward with vertex at \((1, -3)\), which is exactly where the curve sits at \(t = 0\). A table confirms the shape: \(t = -1, 0, 1, 2\) gives the points \((-1, -2)\), \((1, -3)\), \((3, -2)\) and \((5, 1)\), travelling rightward. The parametric form also reveals something the parabola equation hides: the curve reaches its vertex at \(t = 0\) and moves right as \(t\) grows, while \(t < 0\) covers the left half of the parabola on the way in.

Watch what elimination loses

Eliminating the parameter can hide information, so check it against the original. Take \(x = t^2\), \(y = t^4\) with \(t \ge 0\). Eliminating gives \(y = x^2\), which describes a full parabola. But the parametric curve only supplies non-negative \(x\), because \(x = t^2 \ge 0\): the moving point never reaches the left half. The parameter also records direction and timing that the bare equation drops, and different parametrisations can trace the same curve differently. For \(y = x^2\) traced left to right, \(x = t\), \(y = t^2\) works; traced right to left, \(x = -t\), \(y = t^2\); traced twice as fast, \(x = 2t\), \(y = 4t^2\). The curve is the same; the journey is not.

Worked example: a thrown ball

A ball is thrown with horizontal speed 12 metres per second and vertical speed 19.6 metres per second from ground level. Ignoring air resistance, its position at time \(t\) seconds is

x = 12t, \quad y = -4.9t^2 + 19.6t

with \(t \ge 0\) and the 4.9 coming from half the acceleration of gravity, 9.8 metres per second squared. The ball lands when \(y = 0\): \(t(-4.9t + 19.6) = 0\), so \(t = 4\) seconds, at \(x = 48\) metres. The peak comes at \(t = 2\) (halfway), where \(y = -4.9(4) + 19.6(2) = 19.6\) metres. Eliminating the parameter, \(t = \frac{x}{12}\) gives \(y = -\frac{4.9}{144}x^2 + \frac{19.6}{12}x\), confirming the path is a downward-opening parabola.

Choosing your own parameter

Any curve can be parametrised, and you are free to design the parametrisation that makes a problem easiest. The simplest choice for \(y = 4 - x^2\) is \(x = t\), \(y = 4 - t^2\). A circle of radius 3 centred at the origin takes \(x = 3\cos t\), \(y = 3\sin t\) for \(0 \le t \le 2\pi\), starting at \((3, 0)\). Starting from a different point just shifts the angle inside both: \(x = 3\cos(t + \frac{\pi}{2})\), \(y = 3\sin(t + \frac{\pi}{2})\) starts at \((0, 3)\). A line segment from \((1, 2)\) to \((5, 8)\) can be traced with \(x = 1 + 4t\), \(y = 2 + 6t\) for \(0 \le t \le 1\): at \(t = 0\) you are at the start, at \(t = 1\) at the end, and \(t\) measures the fraction of the segment travelled.

Where parametric curves appear

Parametric description is the natural language of anything that moves. Video games and flight simulators store an object's position as functions of the frame time. A Ferris wheel rider is at \(x = 8\cos t\), \(y = 8\sin t + 10\) when the wheel's centre sits 10 metres above the ground with radius 8 metres, and the same equations answer where the rider is at every moment, not just where they could be. Robot arms are programmed joint by joint as functions of time, and the famous brachistochrone problem, finding the curve of fastest descent under gravity, is naturally posed and solved in parametric form.

Common mistakes to avoid

The most common slip is sketching the points in the wrong order: always join them in increasing \(t\), and label the orientation. The second is eliminating the parameter and forgetting to carry over any restriction, as with \(x = t^2\), \(y = t^4\), where the \(x \ge 0\) half is easy to lose. The third is assuming \(t\) is time: it often is in applications, but it can be any parameter, an angle being the common alternative, and the method works identically either way.

Key takeaways

Parametric equations \(x = f(t)\), \(y = g(t)\) describe a plane curve as a journey: the set of points traced, the direction of travel, and the timing. Sketch by tabulating a few \(t\)-values and connecting them in order. To identify the curve, eliminate the parameter by substitution or a trigonometric identity, but remember that the resulting equation may drop restrictions and direction. The same curve has many parametrisations, and choosing a convenient one, like cosine and sine for a circle, is a standard move in applications from projectiles to wheels.

Flashcards

Flashcard

Parametric equations

x = f(t), y = g(t)

Both coordinates as functions of a parameter t.

Test your understanding

Question 1 of 5

A curve is given by x = 2t - 3 and y = 2t + 1. Which equation describes the curve after eliminating the parameter?

Question 2 of 5

As t runs from 0 to 2π, the curve x = cos t, y = sin t traces the unit circle:

Question 3 of 5

The parametric curve x = t², y = t⁴ for t ≥ 0 coincides with which part of y = x²?

Question 4 of 5

A ball follows x = 12t, y = -4.9t² + 19.6t. When does it land, and how far does it travel horizontally?

Question 5 of 5

Which parametrisation traces the segment from (1, 2) to (5, 8) exactly once for 0 ≤ t ≤ 1?

Standards: 9 (BC)

← Previous topicNext topic →