Calculus › Section O · Multiple integrals › Topic O.6

Triple integrals

Add a third nest to the integral and flat plates become solids: volumes, masses, balance points and spin-resistance of 3D objects, all from the same pattern you already know.

From plates to solids

A lamina summed density over area; a solid must sum density over volume. A third integration is the entire difference. The quantity \(\iiint_E f(x, y, z)\,dV\) adds \(f\) against little boxes of volume throughout a solid region \(E\), computed as three nested one-variable integrals. The applications all return from their two-variable versions: integrating 1 gives volume, integrating a density \(\rho(x, y, z)\) gives mass, distance-weighted densities give balance points, and squared-distance-weighted densities give moments of inertia. Master the nested integral and the rest is bookkeeping.

Inside out over a box

Over a rectangular box \(a \le x \le b\), \(c \le y \le d\), \(p \le z \le q\), evaluate the triple integral from the inside out:

\iiint_E f\,dV = \int_a^b \int_c^d \int_p^q f(x, y, z)\,dz\,dy\,dx

The innermost integral holds both \(x\) and \(y\) constant; each outward step revives one more variable, exactly as partial differentiation taught you to freeze variables one at a time. The separable shortcut survives in three dimensions: an integrand \(g(x)h(y)k(z)\) over a box factors into a product of three one-variable integrals, and any order of evaluation gives the same result.

Worked example: a separable box

Evaluate \(\iiint_E (x + 2y + 3z)\,dV\) over the unit box \(0 \le x \le 1\), \(0 \le y \le 1\), \(0 \le z \le 1\). Sum first: \(\iiint x\,dV = \frac{1}{2} \cdot 1 \cdot 1 = \frac{1}{2}\), because the \(x\)-integral is \(\frac{1}{2}\) and the \(y\)- and \(z\)-integrals of 1 are each 1. Likewise \(\iiint 2y\,dV = 2 \cdot \frac{1}{2} = 1\) and \(\iiint 3z\,dV = 3 \cdot \frac{1}{2} = \frac{3}{2}\). The total is \(\frac{1}{2} + 1 + \frac{3}{2} = 3\). A second pass in a different order, integrating \(z\) first, walks through \(\int_0^1\int_0^1 \big[\tfrac{3}{2} + (x + 2y)\big]\,dy\,dx\) and lands on 3 as well, confirming the arithmetic.

Solids between surfaces: find the shadow

General solids are bounded above and below by surfaces. The standard setup puts \(z\) innermost: for each point \((x, y)\) in the solid's shadow \(R\) on the \(xy\)-plane, the vertical line runs from the bottom surface \(z = h_1(x, y)\) up to the top surface \(z = h_2(x, y)\):

\iiint_E f\,dV = \iint_R \int_{h_1(x, y)}^{h_2(x, y)} f(x, y, z)\,dz\,dA

The \(z\)-limits may involve both \(x\) and \(y\); the shadow's limits follow the two-variable rules you already know. Setting up a triple integral is therefore a two-drawing exercise: the side view gives the \(z\)-limits, the footprint gives the rest.

Worked example: a tetrahedron's volume

Find the volume of the solid bounded by the coordinate planes and \(x + 2y + 3z = 6\). The shadow is the triangle \(x \ge 0\), \(y \ge 0\), \(x + 2y \le 6\), and above each shadow point the ceiling is \(z = \frac{6 - x - 2y}{3}\). So

V = \int_0^6 \int_0^{(6-x)/2} \int_0^{(6-x-2y)/3} 1\,dz\,dy\,dx = \int_0^6 \int_0^{(6-x)/2} \frac{6 - x - 2y}{3}\,dy\,dx

The inner integral evaluates to \(\frac{(6-x)^2}{12}\), and the remaining integral is \(\frac{1}{12}\int_0^6 (6 - x)^2\,dx = \frac{72}{12} = 6\). Check it geometrically: the intercepts are 6, 3 and 2, and a tetrahedron with legs \(a, b, c\) has volume \(\frac{abc}{6} = \frac{6 \cdot 3 \cdot 2}{6} = 6\). Both routes give 6.

Mass and centre of mass of a solid

With \(\rho(x, y, z)\) now a density per unit volume, the mass is \(m = \iiint_E \rho\,dV\), and the balance point comes from moments about the coordinate planes: \(M_{yz} = \iiint x\rho\,dV\) (distance to the yz-plane is \(x\)), and cyclically \(M_{xz}\) and \(M_{xy}\). The centre of mass is \((\frac{M_{yz}}{m}, \frac{M_{xz}}{m}, \frac{M_{xy}}{m})\). As a mini example, take the unit cube with density \(\rho = z\), heavier toward the top: \(m = \iiint z\,dV = \frac{1}{2}\); symmetry puts \(\bar{x} = \bar{y} = \frac{1}{2}\); and \(M_{xy} = \iiint z^2\,dV = \frac{1}{3}\), so \(\bar{z} = \frac{1/3}{1/2} = \frac{2}{3}\). The balance point sits high, exactly where the weight is.

Inertia in three dimensions

For spin about a coordinate axis, the lever arm is the distance to the axis, which now involves two coordinates: the distance from \((x, y, z)\) to the x-axis is \(\sqrt{y^2 + z^2}\). The moments of inertia are

I_x = \iiint (y^2 + z^2)\rho\,dV, \quad I_y = \iiint (x^2 + z^2)\rho\,dV, \quad I_z = \iiint (x^2 + y^2)\rho\,dV

As a check of the pattern, a unit cube with \(\rho = 1\) has \(I_z = \iiint (x^2 + y^2)\,dV = \frac{1}{3} + \frac{1}{3} = \frac{2}{3}\): the two off-axis coordinates each contribute their average squared coordinate. Every result from the lamina topic, from radii of gyration to the energy formula, carries over with the new lever arms.

Choosing the order of integration

Nothing forces \(z\) to be the innermost variable. The working rule: whichever variable has the simplest limiting surfaces goes inside, and the remaining two variables sweep the shadow in whichever plane is cleanest. A solid squeezed between two planes \(y = 1 - x\) and \(y = 0\) may read best with \(y\) inside and the shadow drawn in the \(xz\)-plane. The procedure is the same every time: pick the inside variable, draw the vertical (or lateral) lines through the solid to find its entry and exit surfaces, then project the solid onto the plane of the remaining two variables to build the outer limits from a standard region sketch.

Common mistakes to avoid

The top error is mismatched limits: if \(z\) is innermost, its limits may use \(x\) and \(y\), but the middle limits may use only the outer variable, and the outermost limits must be constants, exactly as in the two-variable case. Second, the shadow is not the solid: \(R\) is the projection onto a coordinate plane, and confusing a face of the solid with its shadow produces wrong outer limits. Third, mass moments carry the density; dropping \(\rho\) quietly replaces the solid with a uniform twin. Fourth, inertia squares the full distance to the axis, both off-axis coordinates, not just one.

Key takeaways

A triple integral is three nested single integrals, evaluated inside out with the usual freezing discipline; over a box, separable integrands factor into products. For a solid between surfaces, put \(z\) inside with surface limits, then run a double integral over the shadow, built like any two-variable region. Volume is \(\iiint 1\,dV\); mass is \(\iiint \rho\,dV\); the centre of mass divides the plane-moments \(M_{yz}, M_{xz}, M_{xy}\) by the mass; and spin about a coordinate axis weights by the square of the full off-axis distance, \(I_x = \iiint (y^2 + z^2)\rho\,dV\).

Flashcards

Flashcard

Triple integral over a box

∭ f dV = ∫aᵇ ∫cᵈ ∫p^q f dz dy dx

Inside out, one variable at a time.

Test your understanding

Question 1 of 5

What is the value of the triple integral of 6xy over the box 0 ≤ x ≤ 1, 0 ≤ y ≤ 2, 0 ≤ z ≤ 3?

Question 2 of 5

What is the volume of the solid bounded by the coordinate planes and the plane x + y + 2z = 4?

Question 3 of 5

A solid cube 0 ≤ x, y, z ≤ 1 has density ρ = 2z. What is its mass?

Question 4 of 5

For that cube with density ρ = 2z, where is the centre of mass?

Question 5 of 5

Which integral gives the moment of inertia about the x-axis for a solid with density ρ(x, y, z)?

Standards: Beyond AP

← Previous topicNext topic →