Calculus › Section O · Multiple integrals › Topic O.7

Triple integrals in cylindrical and spherical coordinates

Round solids deserve round coordinates: cylindrical and spherical systems turn spheres, cones and cylinders into constant limits, at the small price of a volume element that remembers the curve.

Round solids want round coordinates

The rectangular triple integral from the previous topic fights round shapes: describe a sphere in \(x\), \(y\) and \(z\) limits and the boundary equation \(x^2 + y^2 + z^2 = a^2\) leaks into every limit. The cure is coordinate systems shaped like the solid. Cylindrical coordinates — polar coordinates plus a height — handle any solid symmetric about the z-axis, reusing the polar shadows you already know. Spherical coordinates measure distance from the origin and two angles, turning spheres and cones into constants. Each system charges a fee: the volume element grows a factor beyond \(dV = dx\,dy\,dz\). This topic shows where those factors come from and how to run the integrals.

Cylindrical coordinates: polar plus height

Cylindrical coordinates keep the polar pair \((r, \theta)\) in the \(xy\)-plane and leave \(z\) alone: a point is \((r, \theta, z)\) with \(x = r\cos\theta\), \(y = r\sin\theta\), \(z = z\). The volume element gains the polar factor:

dV = r\,dz\,dr\,d\theta

because the wedge's footprint in the shadow has area \(r\,dr\,d\theta\), exactly as in polar double integrals, and its height is \(dz\). For a solid symmetric about the z-axis, put \(z\) innermost between the bottom and top surfaces — round surfaces read as \(z = g(r)\) — and let \(r\) and \(\theta\) sweep a polar shadow. Converting is two moves: rewrite the integrand with \(x = r\cos\theta\) and \(y = r\sin\theta\), and replace \(dV\) with \(r\,dz\,dr\,d\theta\).

Worked example: a cylinder capped by a paraboloid

Find the volume of the solid inside the cylinder \(x^2 + y^2 = 1\), below \(z = 2 - x^2 - y^2\) and above \(z = 0\). In cylindrical form the ceiling is \(z = 2 - r^2\) and the shadow is the disk \(0 \le r \le 1\), \(0 \le \theta \le 2\pi\):

V = \int_0^{2\pi} \int_0^1 \int_0^{2 - r^2} r\,dz\,dr\,d\theta = \int_0^{2\pi} \int_0^1 (2r - r^3)\,dr\,d\theta = 2\pi \Big(1 - \tfrac{1}{4}\Big) = \tfrac{3\pi}{2}

Second route: the cylinder of radius 1 and height 2 has volume \(2\pi\), and the bowl-shaped gap between the ceiling and \(z = 2\) has volume \(\int_0^{2\pi}\int_0^1 r \cdot r^2\,dr\,d\theta = 2\pi \cdot \tfrac{1}{4} = \tfrac{\pi}{2}\). The solid is \(2\pi - \tfrac{\pi}{2} = \tfrac{3\pi}{2}\). Both routes agree, and the \(r\)-factor did the work.

Spherical coordinates: distance and two angles

Spherical coordinates \((\rho, \theta, \phi)\) locate a point by how far and in which two directions: \(\rho\) is the distance from the origin, \(\theta\) is the same azimuthal angle as in polar and cylindrical, and \(\phi\) is the angle measured downward from the positive z-axis. The conversions are

x = \rho\sin\phi\cos\theta, \quad y = \rho\sin\phi\sin\theta, \quad z = \rho\cos\phi

A full sweep uses \(\rho \ge 0\), \(0 \le \theta \le 2\pi\), \(0 \le \phi \le \pi\). The \(\sin\phi\) in \(x\) and \(y\) is no accident: the ring of points at angle \(\phi\), distance \(\rho\), has radius \(\rho\sin\phi\), shrinking to a point at the pole.

Why the spherical element carries sin φ

The spherical volume element is

dV = \rho^2\sin\phi\,d\rho\,d\phi\,d\theta

and it comes from measuring a small coordinate wedge. The wedge is roughly a box: its radial side has length \(d\rho\); its side along a meridian has length \(\rho\,d\phi\); and its east-west side is a slice of the latitude ring at angle \(\phi\), which has radius \(\rho\sin\phi\), so that side has length \(\rho\sin\phi\,d\theta\). Multiply the three sides and \(\rho^2\sin\phi\) appears. The \(\sin\phi\) is the spherical cousin of the polar \(r\): both record that angular slices shrink near the axis and swell away from it. Forgetting one quietly distorts every region near a pole.

Worked example: the volume of a ball

Compute the volume of a ball of radius \(a\) in spherical coordinates. Every limit is a constant:

V = \int_0^{2\pi} \int_0^{\pi} \int_0^{a} \rho^2\sin\phi\,d\rho\,d\phi\,d\theta

The integral separates into a product: \(\big(\tfrac{a^3}{3}\big) \cdot \big(\int_0^{\pi}\sin\phi\,d\phi = 2\big) \cdot 2\pi = \tfrac{4}{3}\pi a^3\). The textbook sphere formula falls out of a three-line calculation with no memorising. A shorter \(\phi\)-range costs nothing extra: replacing \(\phi\)'s upper limit \(\pi\) with \(\tfrac{\pi}{2}\) gives the upper hemisphere \(\tfrac{2}{3}\pi a^3\) in the same stroke.

Worked example: the ice-cream cone

Find the volume of the region above the cone \(\phi = \tfrac{\pi}{3}\) and inside the sphere \(\rho = 2\). The description is already the limit structure:

V = \int_0^{2\pi} \int_0^{\pi/3} \int_0^{2} \rho^2\sin\phi\,d\rho\,d\phi\,d\theta = \tfrac{8}{3} \cdot 2\pi \cdot \big[-\cos\phi\big]_0^{\pi/3} = \tfrac{16\pi}{3} \cdot \tfrac{1}{2} = \tfrac{8\pi}{3}

Check it by fractions: the share of a sphere above a cone of half-angle \(\alpha\) is \(\frac{\int_0^{\alpha}\sin\phi\,d\phi}{\int_0^{\pi}\sin\phi\,d\phi} = \frac{1 - \cos\alpha}{2}\), here \(\tfrac{1 - 1/2}{2} = \tfrac{1}{4}\). The full sphere has volume \(\tfrac{4}{3}\pi(2^3) = \tfrac{32\pi}{3}\), and a quarter of it is \(\tfrac{8\pi}{3}\). In rectangular coordinates this solid takes a page; in spherical it takes one line.

Choosing the coordinate system

Let the coordinate system copy the solid's symmetry. A round solid built around the z-axis — a cylinder, cone or paraboloid, or any solid whose shadow is a disk or ring — wants cylindrical coordinates. A solid described from the origin — spheres, hemispheres, ice-cream regions, anything whose boundary is \(\rho =\) constant or \(\phi =\) constant — wants spherical. Boxes and axis-aligned slabs stay rectangular. When converting, remember both halves: the limits and the integrand change together, with \(dV\) becoming \(r\,dz\,dr\,d\theta\) or \(\rho^2\sin\phi\,d\rho\,d\phi\,d\theta\). A solid that mixes boundaries, such as a sphere sliced by a flat plane, belongs to whichever system matches its hardest boundary.

Common mistakes to avoid

The deadliest error is dropping the volume element: \(dV\) is never \(d\rho\,d\phi\,d\theta\) — the \(\rho^2\sin\phi\) must ride along — and never \(dz\,dr\,d\theta\) in cylindrical. Second, mind the ranges: \(\theta\) runs \(0\) to \(2\pi\) but \(\phi\) stops at \(\pi\), because \(\phi = \pi\) already reaches the negative z-axis. Third, \(\phi\) is measured down from the positive z-axis, not up from the \(xy\)-plane — a point on the equator has \(\phi = \tfrac{\pi}{2}\), not \(0\). Fourth, convert the integrand: an \(x^2\) becomes \(r^2\cos^2\theta\) in cylindrical and \(\rho^2\sin^2\phi\cos^2\theta\) in spherical; leaving \(x^2\) untouched integrates the wrong function. Fifth, cylindrical \(r\) is a distance, never negative, so \(r\)-limits always run from the small value to the large.

Key takeaways

Cylindrical coordinates \((r, \theta, z)\) are polar plus height: \(x = r\cos\theta\), \(y = r\sin\theta\), and \(dV = r\,dz\,dr\,d\theta\); they fit solids symmetric about the z-axis, with \(z\) innermost between surfaces and \(r, \theta\) sweeping a polar shadow. Spherical coordinates \((\rho, \theta, \phi)\) measure distance from the origin and two angles: \(x = \rho\sin\phi\cos\theta\), \(y = \rho\sin\phi\sin\theta\), \(z = \rho\cos\phi\), and \(dV = \rho^2\sin\phi\,d\rho\,d\phi\,d\theta\); they fit origin-centred solids, where spheres become constant \(\rho\) and cones become constant \(\phi\). The sphere formula \(\tfrac{4}{3}\pi a^3\) and cone-capped volumes drop out of constant-limit integrals — and the \(\sin\phi\), like the polar \(r\), is the price of roundness that must never be left behind.

Flashcards

Flashcard

Cylindrical coordinates

(r, θ, z): polar in the xy-plane plus a height

x = r cos θ, y = r sin θ, z stays z.

Test your understanding

Question 1 of 5

What is the volume element in cylindrical coordinates?

Question 2 of 5

What is the volume of a sphere of radius 3, computed with spherical coordinates?

Question 3 of 5

A solid lies inside the cylinder x² + y² = 1, below z = 2 − x² − y² and above z = 0. What is its volume?

Question 4 of 5

Evaluate ∫ from 0 to 2π ∫ from 0 to π/2 ∫ from 0 to 1 of ρ² sin φ dρ dφ dθ.

Question 5 of 5

In spherical coordinates, what does the angle φ measure?

Standards: Beyond AP

← Previous topicNext topic →