Chemistry › Section D · Stoichiometry of reactions › Topic D.1
Writing and balancing equations
A chemical equation is a compact sentence that says which substances react, what they become and in what proportions. Balancing it makes the sentence obey the law of conservation of mass, and the balanced numbers are the starting point for every calculation about reactions.
Atoms are rearranged, never lost
In the 1770s and 1780s, Antoine Lavoisier showed by careful weighing in closed vessels that the total mass of substances does not change during a chemical reaction. Atomic theory explains why: a reaction breaks bonds and forms new ones, but every atom present at the start is still there at the end, only in new partners. A chemical equation must therefore show the same number of atoms of each element on both sides. For reactions involving ions it must show the same total charge on both sides too. Writing an equation that meets both conditions is called balancing it.
Reading an equation
Reactants are written on the left and products on the right, separated by an arrow read as "react to form". Plus signs separate the substances on each side. A number in front of a formula is its coefficient; a coefficient of 1 is not written. State symbols show the physical state: (s) solid, (l) liquid, (g) gas and (aq) dissolved in water. Conditions can be written over the arrow, with \(\Delta\) meaning heat. Heating limestone gives quicklime and carbon dioxide:
Here one of each formula already balances, so every coefficient is 1.
Coefficients and subscripts
Subscripts are part of a substance's identity, so they can never be changed to balance an equation. Changing \(\mathrm{H_2O}\) to \(\mathrm{H_2O_2}\) would turn water into hydrogen peroxide. Only coefficients change, and a coefficient multiplies every atom in the formula after it. To count atoms, multiply the coefficient by each subscript, including any subscript outside brackets. So \(\mathrm{3Ca(NO_3)_2}\) contains 3 calcium atoms, \(3 \times 2 = 6\) nitrogen atoms and \(3 \times 2 \times 3 = 18\) oxygen atoms. If an element appears in two formulas on the same side, add the counts from both.
Balancing by inspection
Most equations can be balanced by careful trial, with a running count. 1. Write correct formulas for every reactant and product. 2. Count the atoms of each element on each side. 3. Start with an element that appears in only one formula on each side, often in the most complicated substance. 4. Treat a polyatomic ion, such as \(\mathrm{NO_3^-}\) or \(\mathrm{SO_4^{2-}}\), as a single unit if it appears unchanged on both sides. 5. Leave elements that stand alone, such as \(\mathrm{O_2}\) or Fe, until last, since changing them disturbs nothing else. 6. Recount everything, and reduce the coefficients to the smallest whole numbers.
Worked example: burning propane
Propane, \(\mathrm{C_3H_8}\), burns in oxygen to form carbon dioxide and water. 1. Skeleton: \(\mathrm{C_3H_8 + O_2 \rightarrow CO_2 + H_2O}\). 2. Carbon appears in one formula per side: 3 on the left, so write 3 in front of \(\mathrm{CO_2}\). 3. Hydrogen: 8 on the left, so write 4 in front of \(\mathrm{H_2O}\). 4. Oxygen is last because \(\mathrm{O_2}\) is an element: the right now has \(3 \times 2 + 4 \times 1 = 10\) O atoms, so write 5 in front of \(\mathrm{O_2}\). 5. Result:
6. Check: C 3 = 3, H 8 = 8, O 10 = 10.
Fractions along the way
Sometimes the last element needs an odd number of atoms from a diatomic molecule. Try butane: \(\mathrm{C_4H_{10} + O_2 \rightarrow 4CO_2 + 5H_2O}\) balances carbon and hydrogen, leaving \(8 + 5 = 13\) O atoms on the right. No whole number of \(\mathrm{O_2}\) gives 13, so write \(\tfrac{13}{2}\) for the moment:
Then multiply every coefficient by 2 to clear the fraction:
Check: C 8 = 8, H 20 = 20, O 26 = 26.
What the coefficients mean
Coefficients give the relative numbers of particles that react and form. For \(\mathrm{N_2 + 3H_2 \rightarrow 2NH_3}\), one nitrogen molecule reacts with three hydrogen molecules to form two ammonia molecules. Scaled up by the Avogadro constant, 1 mol of \(\mathrm{N_2}\) reacts with 3 mol of \(\mathrm{H_2}\) to give 2 mol of \(\mathrm{NH_3}\). These mole ratios are what later reaction calculations use. The equation \(\mathrm{2N_2 + 6H_2 \rightarrow 4NH_3}\) has the same ratios, but convention asks for the smallest whole numbers. Atoms and mass balance, but the total number of molecules need not: here 4 molecules become 2.
Ions in water
Soluble ionic compounds separate into their ions when they dissolve, a process called dissociation. An equation written with whole formulas is a molecular equation. A complete ionic equation shows every dissolved ionic compound as separate ions, while solids, liquids, gases and most dissolved molecular substances keep their formulas; strong acids, met in the next topic, are the exception. Ions that appear unchanged on both sides take no part in the reaction and are called spectator ions. Cancelling them leaves the net ionic equation, which shows only the change that really happens. In this topic you will be told which compounds dissolve; the rules for predicting it come in the next topic.
Worked example: a yellow precipitate
Mixing lead(II) nitrate and potassium iodide solutions gives solid lead(II) iodide; potassium nitrate stays dissolved. 1. Molecular:
balanced by treating \(\mathrm{NO_3}\) as one unit. 2. Complete ionic:
3. Spectators: \(\mathrm{K^+}\) and \(\mathrm{NO_3^-}\). 4. Net ionic:
5. Check: Pb 1 = 1, I 2 = 2, and charge \((+2) + 2(-1) = 0\) on both sides.
Worked example: balancing charge
A copper wire placed in silver nitrate solution grows silver crystals as the solution turns blue with copper(II) ions. 1. First attempt:
2. Atoms: one Cu and one Ag on each side, so the atoms balance. 3. Charge: \(+1\) on the left but \(+2\) on the right, so the equation is wrong. 4. Fix: two silver ions supply \(+2\), so write 2 in front of both silver species:
5. Check: Cu 1 = 1, Ag 2 = 2, charge \(+2 = +2\).
Common mistakes to avoid
First, changing a subscript, or adding an atom to a formula, to make the numbers work. Second, forgetting that a coefficient multiplies every atom in its formula, including those inside brackets. Third, forgetting an element that appears in two formulas on one side, such as oxygen in both \(\mathrm{CO_2}\) and \(\mathrm{H_2O}\). Fourth, leaving fractions or non-reduced coefficients in the final answer. Fifth, checking only atoms in an ionic equation: the total charge must match too. Sixth, splitting solids, gases or most molecular substances, such as water, into ions, or writing a polyatomic ion such as \(\mathrm{SO_4^{2-}}\) as separate S and O.
Key takeaways
Atoms are conserved, so a balanced equation has the same number of each kind of atom on both sides, and for ions the same total charge. Change only coefficients, never subscripts, and multiply through to count atoms. Balance elements in one formula first and lone elements last, clear any fractions, and use the smallest whole numbers. Coefficients give particle and mole ratios. For reactions in water, write the molecular, complete ionic and net ionic equations, cancelling the spectator ions.
Flashcards
Flashcard
Total mass does not change in a chemical reaction
Test your understanding
Question 1 of 5
Aluminium reacts with oxygen to form aluminium oxide: Al + O₂ → Al₂O₃. What are the smallest whole-number coefficients, in order?
Question 2 of 5
How many oxygen atoms are represented by 3Ca(NO₃)₂?
Question 3 of 5
Which equation for the combustion of ethanol, C₂H₅OH, is balanced with the smallest whole-number coefficients?
Question 4 of 5
Barium chloride and sodium sulfate solutions react: BaCl₂(aq) + Na₂SO₄(aq) → BaSO₄(s) + 2NaCl(aq). BaSO₄ is insoluble; the other compounds dissolve. What is the net ionic equation?
Question 5 of 5
Which net ionic equation for aluminium metal reacting with copper(II) ions is balanced for both atoms and charge?
