Chemistry › Section C · Composition of substances and solutions › Topic C.4

Other concentration units

Molarity is the chemist's everyday unit, but product labels, medicine, water-quality limits and some physical laws use others. Each one answers a slightly different question about how much solute is present, and you need to be able to read and convert all of them.

Why more than one unit?

Molarity counts moles per litre of solution, which suits reactions measured out by volume. Other situations call for other comparisons. A shop label for a cleaning product or a drink lists percentages, because shoppers do not count in moles. A water-quality report deals with contaminants so scarce that percentages would need many zeros, so it uses parts per million or billion. Some properties of solutions depend on the ratio of solute particles to solvent particles, so chemists also use molality and mole fraction, which do not change with temperature. All of these are ratios of solute to solution, or of solute to solvent.

Mass percentage

Mass percentage compares the mass of solute with the mass of the whole solution:

\text{mass percentage} = \frac{\text{mass of solute}}{\text{mass of solution}} \times 100\%

The solution's mass includes the solute. Dissolving 12.0 g of sugar in 88.0 g of water gives 100.0 g of solution, so the sugar is \(\frac{12.0}{100.0} \times 100\% = 12.0\%\) by mass. Both masses must be in the same unit, which then cancels. When a problem gives a volume of solution instead, use its density to convert the volume to a mass first. A label may show this unit as % (m/m) or % w/w.

Worked example: salt in seawater

Seawater is about 3.50% dissolved salts by mass and has a density of about 1.025 g/mL. What mass of salts is in 1.00 L of seawater? 1. Convert volume to mass with density: \(1.00\ \mathrm{L} = 1000\ \mathrm{mL}\), and \(1000\ \mathrm{mL} \times 1.025\ \mathrm{g/mL} = 1025\ \mathrm{g}\) of solution. 2. Apply the percentage: \(1025\ \mathrm{g} \times \frac{3.50}{100} = 35.9\ \mathrm{g}\) of salts. 3. Check: about 3.5% of roughly 1 kg is about 35 g, so the answer is sensible. 4. Note: ignoring density would give 35.0 g, a small but real error.

Volume and mass-volume percentages

When both components are liquids, a volume percentage is often more natural:

\text{volume percentage} = \frac{\text{volume of solute}}{\text{volume of solution}} \times 100\%

Drinks are labelled this way as alcohol by volume (ABV), so a 750 mL bottle of wine at 12% ABV contains about \(0.12 \times 750 = 90\) mL of ethanol. Medicine often uses a mass-volume percentage, grams of solute per 100 mL of solution, written % (m/v) or % w/v. Saline at 0.9% (m/v) holds 0.9 g of NaCl per 100 mL, which is 9 g per litre. Because three different percentages exist, always say which one you mean.

Parts per million and per billion

Very dilute solutions use the same mass ratio with a larger multiplier:

\text{ppm} = \frac{\text{mass of solute}}{\text{mass of solution}} \times 10^6 \qquad \text{ppb} = \frac{\text{mass of solute}}{\text{mass of solution}} \times 10^9

So 1 ppm is 1 g of solute in a million grams of solution, and 1 ppm equals 1000 ppb. For dilute water samples, 1 L of solution has a mass very close to 1 kg, so 1 ppm is about 1 mg/L and 1 ppb is about 1 µg/L. That shortcut works only for dilute aqueous solutions with a density near 1.00 g/mL.

Worked example: arsenic in a well

A 500.0 mL sample of well water contains 7.5 µg of arsenic. The US limit for arsenic in drinking water is 10 ppb. Is the well safe to drink from? 1. Mass of solution: dilute water has a density of about 1.00 g/mL, so 500.0 mL is about 500.0 g. 2. Mass of arsenic in grams: \(7.5\ \mathrm{\mu g} = 7.5 \times 10^{-6}\ \mathrm{g}\). 3. Concentration: \(\frac{7.5 \times 10^{-6}\ \mathrm{g}}{500.0\ \mathrm{g}} \times 10^9 = 15\) ppb. 4. Compare: 15 ppb exceeds the 10 ppb limit, so the water needs treatment. 5. In ppm the same value is 0.015 ppm, showing why ppb is easier to read.

Molality

Molality is the amount of solute per kilogram of solvent, not of solution:

b = \frac{n_{\text{solute}}}{m_{\text{solvent}}\ (\mathrm{kg})}

Its unit is mol/kg. IUPAC allows the symbol \(b\), which avoids confusion with mass, though many textbooks write a lowercase italic \(m\) and call a 1 mol/kg solution "1 molal". Molality has one big advantage. Volumes swell and shrink as temperature changes, so molarity drifts slightly, but masses do not change with temperature, so molality stays fixed. That makes it the unit of choice for later topics on how dissolved particles change boiling and freezing points.

Mole fraction

Mole fraction compares the moles of one component with the total moles of every component in the mixture:

x_A = \frac{n_A}{n_{\text{total}}}

It has no unit, it always lies between 0 and 1, and the mole fractions of all the components add up to exactly 1. A mixture of 1.00 mol of ethanol and 3.00 mol of water has \(x_{\text{ethanol}} = \frac{1.00}{4.00} = 0.250\) and \(x_{\text{water}} = 0.750\). Like molality, mole fraction does not depend on temperature. It counts particles rather than grams, so it is especially useful for gas mixtures and for solutions of two liquids.

Worked example: antifreeze

A coolant is made by dissolving 31.0 g of ethylene glycol, \(\mathrm{C_2H_6O_2}\) (62.07 g/mol), in 250.0 g of water (18.02 g/mol). Find its molality and the mole fraction of glycol. 1. Moles of glycol: \(\frac{31.0}{62.07} = 0.4994\) mol. 2. Mass of solvent in kilograms: 0.2500 kg. 3. Molality: \(b = \frac{0.4994}{0.2500} = 2.00\) mol/kg. 4. Moles of water: \(\frac{250.0}{18.02} = 13.873\) mol. 5. Mole fraction: \(x = \frac{0.4994}{0.4994 + 13.873} = 0.0347\). 6. Check: water molecules outnumber glycol molecules about 28 to 1, so a small mole fraction is expected.

Common mistakes to avoid

First, using the mass of solvent where the mass of solution belongs: percentages and ppm divide by the solution, which includes the solute. Second, doing the reverse for molality, which divides by kilograms of solvent only. Third, leaving the solvent in grams in a molality calculation, which makes answers 1000 times too small. Fourth, applying 1 ppm = 1 mg/L to concentrated solutions or liquids with densities far from 1.00 g/mL. Fifth, mixing up % (m/m), % (v/v) and % (m/v). Sixth, writing the ratio of solute to solvent moles as a mole fraction: the denominator is the total.

Key takeaways

Mass percentage is mass of solute over mass of solution, times 100%; volume percentage and mass-volume percentage (grams per 100 mL) are used for liquids and medicines. Parts per million and billion use multipliers of \(10^6\) and \(10^9\), and in dilute water 1 ppm is about 1 mg/L. Molality is moles of solute per kilogram of solvent, in mol/kg. Mole fraction is moles of one component over total moles, with no unit, and all fractions add to 1. Molality and mole fraction do not change with temperature.

Flashcards

Flashcard

Mass percentage

Mass of solute ÷ mass of solution × 100%

The solution's mass includes the solute.

Test your understanding

Question 1 of 5

15.0 g of potassium chloride is dissolved in 135.0 g of water. What is the mass percentage of potassium chloride?

Question 2 of 5

A 2.00 L sample of dilute water (density 1.00 g/mL) contains 18.0 mg of nitrate ions. What is the nitrate concentration in ppm?

Question 3 of 5

0.500 mol of glucose (180.16 g/mol) is dissolved in 250.0 g of water. What is the molality of the solution?

Question 4 of 5

A mixture contains 1.00 mol of methanol and 4.00 mol of water. What is the mole fraction of methanol?

Question 5 of 5

Why is molality often preferred to molarity when a solution's temperature changes?

← Previous topicNext topic →