Chemistry › Section N · Acid-base equilibria › Topic N.6

Buffers

A few drops of strong acid can shift the pH of pure water by several units, yet your blood's pH changes far less when exercising muscles release acids into it. Buffers are the reason: mixtures of a weak acid and its conjugate base that soak up added acid or base.

Why pH needs protecting

Many chemical systems work only within a narrow pH range. Enzymes change shape and stop working if the pH drifts, human blood must stay between about 7.35 and 7.45, and many medicines, shampoos and laboratory reactions are made to a set pH. Unprotected water is very sensitive: adding 0.010 mol of sodium hydroxide to 1.00 L of pure water takes the pH from 7.00 to 12.00. A buffer is a solution that resists such changes. It cannot hold the pH perfectly still, but it can keep the change to about a tenth of a unit or less for moderate additions of acid or base.

What a buffer contains

A buffer holds appreciable amounts of both members of a weak conjugate acid-base pair. One kind is a weak acid with a salt of its conjugate base, such as acetic acid with sodium acetate. The other is a weak base with a salt of its conjugate acid, such as ammonia with ammonium chloride. A buffer can also be made by partly neutralising a weak acid with a strong base, which turns some of the acid into its conjugate base. A strong acid with its salt, such as HCl with NaCl, is not a buffer, because chloride is too weak a base to take up added hydronium.

How a buffer works

Each member of the pair neutralises one kind of intruder. Added strong acid is consumed by the conjugate base:

\mathrm{CH_3COO^-(aq) + H_3O^+(aq) \rightarrow CH_3COOH(aq) + H_2O(l)}

Added strong base is consumed by the weak acid:

\mathrm{CH_3COOH(aq) + OH^-(aq) \rightarrow CH_3COO^-(aq) + H_2O(l)}

Both reactions go essentially to completion, because a strong acid or base reacts completely with a weak base or acid. In each case the strong intruder becomes the weak member of the pair, which ionises only slightly. All that changes is the ratio of acid to conjugate base, and the pH depends on that ratio only gently.

The Henderson-Hasselbalch equation

Rearranging \(K_a = \frac{\mathrm{[H_3O^+][A^-]}}{\mathrm{[HA]}}\) gives \(\mathrm{[H_3O^+]} = K_a \frac{\mathrm{[HA]}}{\mathrm{[A^-]}}\). Taking the negative logarithm of both sides turns the product into a sum:

\mathrm{pH} = \mathrm{p}K_a + \log\frac{[\mathrm{A^-}]}{[\mathrm{HA}]}

This is the Henderson-Hasselbalch equation. When the two concentrations are equal, the log term is zero and pH = \(\mathrm{p}K_a\). More base than acid makes the pH higher than the \(\mathrm{p}K_a\); more acid makes it lower. Both species share one volume, so the ratio of their amounts in moles can replace the ratio of concentrations.

When the equation can be trusted

The equation puts the starting concentrations of HA and \(\mathrm{A^-}\) in place of their equilibrium values, which is the familiar small-x approximation: it assumes the acid's own ionisation, and the conjugate base's reaction with water, barely change those amounts. That holds when both components are present in amounts far larger than the hydronium or hydroxide they produce. In practice, use it when the ratio \(\mathrm{[A^-]/[HA]}\) lies between about 0.1 and 10 and both concentrations are much larger than \(K_a\). It fails for very dilute mixtures, for acids with large \(K_a\), and after so much acid or base has been added that one component is nearly used up.

Worked example: the pH of an acetate buffer

A buffer is 0.20 M acetic acid and 0.30 M sodium acetate. Find its pH at 25 °C, given \(\mathrm{p}K_a\) = 4.74. 1. Identify the pair: HA is \(\mathrm{CH_3COOH}\) at 0.20 M; \(\mathrm{A^-}\) is acetate at 0.30 M. 2. Check validity: the ratio, 1.5, lies between 0.1 and 10, and both concentrations far exceed \(K_a\). 3. Substitute: \(\mathrm{pH} = 4.74 + \log\frac{0.30}{0.20} = 4.74 + 0.18 = 4.92\). 4. Check: there is more base than acid, so the pH should sit a little above the \(\mathrm{p}K_a\), and it does.

Worked example: adding strong base

1.00 L of buffer holds 0.100 mol of acetic acid and 0.100 mol of acetate. Find the pH after adding 0.010 mol of NaOH, with no volume change. 1. Reaction first: hydroxide converts acid to acetate,

\mathrm{CH_3COOH + OH^- \rightarrow CH_3COO^- + H_2O}\,.

2. New amounts: acid 0.100 − 0.010 = 0.090 mol; acetate 0.100 + 0.010 = 0.110 mol. 3. Equilibrium second: \(\mathrm{pH} = 4.74 + \log\frac{0.110}{0.090} = 4.83\). 4. Compare: the buffer rose from 4.74 to 4.83, a change of 0.09, while the same NaOH in 1.00 L of pure water gives pH 12.00, a rise of five units.

Buffer capacity

Buffer capacity is the amount of strong acid or base a buffer can absorb before its pH changes significantly, often taken as one unit. It depends on the amounts of the two components, not just their ratio. Two acetate buffers both have pH 4.74, one 0.010 M in each component and one 0.50 M in each. Adding 0.0050 mol of NaOH to 1.00 L of each, the dilute buffer jumps to \(4.74 + \log\frac{0.015}{0.0050} = 5.22\), while the concentrated one barely moves, to 4.75. Capacity is also greatest when the two components are equal, because then the buffer can absorb acid and base equally well.

Choosing a buffer for a target pH

Since \(\log\frac{[\mathrm{A^-}]}{[\mathrm{HA}]}\) runs from −1 to +1 as the ratio goes from 0.1 to 10, a buffer works well only within about one pH unit of its \(\mathrm{p}K_a\). So choose a weak acid whose \(\mathrm{p}K_a\) is close to the pH you want: acetic acid (4.74) for pH 4 to 5.5, dihydrogen phosphate (7.21) for near-neutral work, ammonium (9.26) for pH around 9. Then set the ratio. For an acetate buffer at pH 5.00, \(\log\frac{[\mathrm{A^-}]}{[\mathrm{HA}]} = 5.00 - 4.74 = 0.26\), so the ratio is \(10^{0.26} = 1.8\), and the total concentration sets the capacity.

The buffer in your blood

Blood plasma is buffered mainly by carbonic acid and hydrogen carbonate:

\mathrm{H_2CO_3(aq) + H_2O(l) \rightleftharpoons H_3O^+(aq) + HCO_3^-(aq)}

At body temperature its effective \(\mathrm{p}K_a\) is about 6.1, and plasma holds roughly 20 times as much hydrogen carbonate as carbonic acid, so \(\mathrm{pH} \approx 6.1 + \log 20 = 7.4\). The surplus of base suits the body, because metabolism adds acids such as lactic acid. The system has a second line of defence: carbonic acid breaks down to carbon dioxide and water, and faster breathing removes the carbon dioxide, pulling the equilibrium away from hydronium.

Common mistakes to avoid

First, calling a strong acid and its salt a buffer. Second, writing the log ratio upside down: it is base over acid. Third, putting the strong acid or base straight into the Henderson-Hasselbalch equation without first doing the neutralisation stoichiometry. Fourth, assuming a buffer holds any pH: it works only within about one unit of its \(\mathrm{p}K_a\). Fifth, confusing pH with capacity: diluting a buffer leaves its pH almost unchanged but lowers its capacity. Sixth, using the equation when one component is almost gone, where it no longer applies.

Key takeaways

A buffer contains appreciable amounts of a weak acid and its conjugate base, or a weak base and its conjugate acid. Its base consumes added acid and its acid consumes added base, converting strong intruders into weak ones. The Henderson-Hasselbalch equation, pH = pKa + log([A⁻]/[HA]), gives its pH when both components are plentiful and their ratio is between 0.1 and 10; pH = pKa when they are equal. When strong acid or base is added, do the stoichiometry first. Capacity rises with the amounts present, and a buffer works within about one unit of its pKa.

Flashcards

Flashcard

Buffer

A solution whose pH changes very little on adding modest amounts of acid or base

It contains a weak conjugate acid-base pair.

Test your understanding

Question 1 of 5

Which mixture is a buffer?

Question 2 of 5

What is the pH of a buffer that is 0.50 M acetic acid and 0.25 M sodium acetate? (pKa = 4.74)

Question 3 of 5

1.00 L of buffer contains 0.200 mol acetic acid and 0.200 mol sodium acetate (pKa = 4.74). What is the pH after 0.050 mol HCl is added, with no volume change?

Question 4 of 5

Which conjugate pair is the best choice for a buffer at pH 9.3?

Question 5 of 5

Buffer X is 1.0 M acetic acid and 1.0 M sodium acetate; buffer Y is 0.10 M of each. Which statement is correct?

← Previous topicNext topic →