Chemistry › Section G · Chemical bonding and molecular geometry › Topic G.2
Covalent bonding and electronegativity
When two atoms both hold on to their electrons tightly, neither gives one up; instead they share. How evenly they share depends on electronegativity, one number per element that predicts which end of a bond carries a slight negative charge.
Sharing instead of transferring
Ionic bonding needs one atom that loses electrons easily and another that gains them readily. Two nonmetal atoms, both with high ionisation energies, cannot do that, so they share. A covalent bond is a pair of electrons shared between two atoms, holding them together because both nuclei attract the same electrons. In the hydrogen molecule, \(\mathrm{H_2}\), each atom contributes its single electron to the shared pair, and each hydrogen then has two electrons around it, the arrangement of helium. Chlorine atoms, with seven valence electrons each, share one pair to form \(\mathrm{Cl_2}\), giving each atom eight.
How a bond forms
Picture two hydrogen atoms approaching from far apart. At first they hardly interact. As their 1s orbitals begin to overlap, each electron is attracted by both nuclei, and the energy of the pair falls. Push them too close, though, and the two positive nuclei repel strongly, so the energy rises steeply. The lowest point of this energy curve sets the bond length, the distance between the nuclei: 74 pm for \(\mathrm{H_2}\). The depth of the dip is the energy needed to pull the atoms apart again, 436 kJ per mole of H–H bonds. Breaking bonds always absorbs energy, and forming them always releases it.
Properties of molecular substances
Covalent bonds inside a molecule are strong, but the attractions between neighbouring molecules are much weaker. Melting or boiling a molecular substance only has to overcome those weaker attractions, not break covalent bonds, so molecular substances usually have low melting and boiling points. Many are gases or liquids at room temperature, such as oxygen, water and ethanol, and the solids, such as wax or iodine, are usually softer than ionic solids. Being made of neutral molecules, they conduct electricity poorly in any state. The exception is a covalent network solid such as diamond or quartz, in which covalent bonds run through the whole crystal, giving very high melting points.
Pure and polar covalent bonds
When the two bonded atoms are identical, as in \(\mathrm{H_2}\) or \(\mathrm{Cl_2}\), the pair is shared exactly equally: a pure, or nonpolar, covalent bond. When the atoms differ, one usually pulls the shared electrons closer than the other. The electron density shifts towards that atom, which gains a partial negative charge, written δ−, while the other atom is left with a partial positive charge, δ+. This is a polar covalent bond. In hydrogen chloride the electrons spend more time near chlorine, so the bond is written \(\mathrm{H^{\delta+}{-}Cl^{\delta-}}\). Partial charges are fractions of an electron's charge, not whole charges as in ions.
Electronegativity
Electronegativity is a measure of how strongly an atom attracts the shared electrons in a bond. The most used scale was devised by Linus Pauling from bond energies, and it has no units. Some Pauling values: H 2.20, C 2.55, N 3.04, O 3.44, F 3.98, Na 0.93, Mg 1.31, S 2.58, Cl 3.16, Br 2.96. Electronegativity generally increases from left to right across a period and decreases down a group, so the highest values lie in the upper right of the periodic table, with fluorine the highest of all, and the lowest at the lower left: caesium is 0.79. Noble gases are usually left out, because most form no compounds.
Electronegativity is not electron affinity
The two terms sound alike but describe different things. Electron affinity is a measured energy change, in kJ per mole, for an isolated gaseous atom gaining an electron. Electronegativity describes an atom that is already bonded, competing for electrons it shares with a neighbour. It cannot be measured directly; it is calculated from other data, such as bond energies, and is a pure number on a relative scale. The two do tend to follow similar trends, because atoms that attract an extra electron strongly also tend to attract shared electrons strongly.
Bond type from electronegativity difference
The difference in electronegativity, ΔEN, between two bonded atoms indicates how polar the bond is. As a rough guide, ΔEN below about 0.4 gives a nonpolar covalent bond, about 0.4 up to about 2 a polar covalent bond, and above about 2 a mostly ionic bond. These bands are a continuum with many exceptions: HF (ΔEN = 1.78) and \(\mathrm{BF_3}\) (1.94) are covalent molecules, while \(\mathrm{MgCl_2}\) (1.85) is ionic. A better first guide is the kinds of element: two nonmetals usually bond covalently, and a metal with a nonmetal usually ionically. Between metal atoms there is a third type, metallic bonding, in which valence electrons spread through the whole solid. That is why metals conduct electricity and can be hammered into shape.
Worked example: the hydrogen halides
Rank the bonds H–F, H–Cl, H–Br and H–I in order of increasing polarity, and mark the partial charges. 1. Look up the Pauling values: H 2.20, F 3.98, Cl 3.16, Br 2.96, I 2.66. 2. Find each difference: H–F 1.78, H–Cl 0.96, H–Br 0.76, H–I 0.46. 3. Order by ΔEN: H–I < H–Br < H–Cl < H–F. 4. The halogen is more electronegative than hydrogen in every case, so hydrogen is δ+ and the halogen δ− throughout. 5. Check against the trend: electronegativity falls down group 17, so the halogen's pull, and the bond's polarity, should fall from F to I, as it does.
Worked example: classifying bonds
Classify the bonds Br–Br, N–Cl, C–O and K–F. 1. Br–Br: identical atoms, ΔEN = 0, nonpolar covalent. 2. N–Cl: 3.16 − 3.04 = 0.12, which is below 0.4, so essentially nonpolar, even though the atoms differ. 3. C–O: 3.44 − 2.55 = 0.89, polar covalent, with oxygen δ−. 4. K–F: potassium is 0.82, so 3.98 − 0.82 = 3.16; a metal with a nonmetal and a large difference, so ionic: potassium fluoride is a salt made of \(\mathrm{K^+}\) and \(\mathrm{F^-}\) ions. 5. Check: the order of ΔEN, 0 < 0.12 < 0.89 < 3.16, matches the move from equal sharing to transfer.
Common mistakes to avoid
First, thinking that a molecular substance's low boiling point means its covalent bonds are weak; boiling separates molecules without breaking those bonds. Second, putting δ− on the less electronegative atom. Third, treating the ΔEN bands as sharp cut-offs: bonding changes gradually from covalent to ionic, and the type of elements matters too. Fourth, confusing electronegativity, a unitless value for bonded atoms, with electron affinity, a measured energy in kJ per mole. Fifth, assuming that any two different atoms must form a strongly polar bond; N–Cl is nearly nonpolar.
Key takeaways
A covalent bond is a shared electron pair attracted by both nuclei; the bond length is where the energy is lowest, and breaking a bond always costs energy. Molecular substances usually melt and boil at low temperatures and do not conduct, apart from network solids such as diamond. Identical atoms share equally; different atoms form polar bonds with partial charges δ+ and δ−. Electronegativity, on Pauling's unitless scale, rises across a period and falls down a group, with fluorine highest at 3.98. ΔEN below about 0.4 suggests nonpolar, up to about 2 polar covalent, and larger values ionic, with many exceptions.
Flashcards
Flashcard
A pair of electrons shared between two atoms
Test your understanding
Question 1 of 5
Using Pauling values C 2.55, H 2.20, N 3.04 and O 3.44, which bond is the most polar?
Question 2 of 5
In a C–Cl bond (C 2.55, Cl 3.16), which statement is correct?
Question 3 of 5
Why does water boil at only 100 °C even though its O–H bonds are strong?
Question 4 of 5
Which statement correctly contrasts electronegativity with electron affinity?
Question 5 of 5
Potassium has a Pauling electronegativity of 0.82 and bromine 2.96. What type of bonding is expected in potassium bromide?
