Chemistry › Section G · Chemical bonding and molecular geometry › Topic G.1

Ionic bonding

Table salt is made from a metal that reacts violently with water and a gas that is poisonous to breathe, yet it is safe to sprinkle on food. The difference comes from electrons moving from one atom to another and the strong attraction between the ions that result.

Why atoms bond at all

Atoms join together when the bonded arrangement has lower energy than the separate atoms, just as a ball settles at the bottom of a valley. For main-group elements, low-energy arrangements often give each atom the same electron arrangement as a noble gas, with a full outer s and p subshell: eight valence electrons, an octet, or two for the elements nearest helium. Atoms get there in two main ways. They can transfer electrons, making oppositely charged ions that attract each other (ionic bonding), or share pairs of electrons (covalent bonding, the next topic). This topic is about transfer.

What ionic compounds are like

An ionic bond is the electrostatic attraction between cations and anions. Because that attraction is strong and acts in every direction, ionic compounds are crystalline solids at room temperature with high melting points: sodium chloride melts at 801 °C and magnesium oxide at about 2,800 °C. They are hard but brittle. A sharp blow shifts one layer of ions along the next, so that like charges line up side by side, repel, and the crystal splits. As solids they do not conduct electricity, because the ions are locked in place. Melted, or dissolved in water, they conduct well, because the ions can then move and carry charge.

Who gives and who takes

Ionic compounds usually form between a metal and a nonmetal. Metals, on the left of the periodic table and towards the bottom of groups, have low ionisation energies: removing their outer electrons takes relatively little energy. Nonmetals, in the upper right, have high electron affinities: they release energy when they gain an electron. Even so, making ions is not downhill on its own. Turning a mole of gaseous sodium atoms into Na⁺ costs 496 kJ, and turning a mole of chlorine atoms into Cl⁻ releases only 349 kJ, a net cost of 147 kJ. What makes salt stable is the far larger energy released when the ions pack together into a solid, which the bond-strength topic later in this section calculates.

Cations of the main-group elements

A main-group metal atom usually loses all of its valence electrons, leaving the configuration of the noble gas before it. Magnesium, \(\mathrm{1s^2\,2s^2\,2p^6\,3s^2}\), loses its two 3s electrons to become \(\mathrm{Mg^{2+}}\), \(\mathrm{1s^2\,2s^2\,2p^6}\), the configuration of neon. Particles with the same number of electrons are isoelectronic, so \(\mathrm{Mg^{2+}}\) is isoelectronic with Ne. The charge follows the group: groups 1 and 2 give 1+ and 2+, and for group 13 the cation charge equals the group number minus 10, so aluminium, in group 13, forms \(\mathrm{Al^{3+}}\), with the configuration \(\mathrm{[Ne]}\).

Anions of the nonmetals

A nonmetal atom gains just enough electrons to fill its outer s and p subshells, reaching the configuration of the next noble gas. The charge is the number of electrons gained, which is the group number minus 18. Nitrogen, \(\mathrm{1s^2\,2s^2\,2p^3}\), gains three to become \(\mathrm{N^{3-}}\), \(\mathrm{1s^2\,2s^2\,2p^6}\). Oxygen gives \(\mathrm{O^{2-}}\) and fluorine \(\mathrm{F^-}\), with the same configuration. So the series \(\mathrm{N^{3-}}\), \(\mathrm{O^{2-}}\), \(\mathrm{F^-}\), Ne, \(\mathrm{Na^+}\), \(\mathrm{Mg^{2+}}\) and \(\mathrm{Al^{3+}}\) are all isoelectronic, each with 10 electrons. One period down, \(\mathrm{S^{2-}}\) and \(\mathrm{Cl^-}\) match argon.

Worked example: the ions in calcium sulfide

Write the electron configurations of the ions in calcium sulfide and use them to find its formula. 1. Calcium (Z = 20) is \(\mathrm{[Ar]\,4s^2}\). It is in group 2, so it loses both 4s electrons: \(\mathrm{Ca^{2+}}\) is \(\mathrm{[Ar]}\), 18 electrons. 2. Sulfur (Z = 16) is \(\mathrm{[Ne]\,3s^2\,3p^4}\). It is in group 16, so it gains 16 − 18 = −2, that is, two electrons: \(\mathrm{S^{2-}}\) is \(\mathrm{[Ne]\,3s^2\,3p^6}\), which is the same as \(\mathrm{[Ar]}\), 18 electrons. 3. The two ions are isoelectronic with each other and with argon. 4. Charges of 2+ and 2− cancel one to one, so the formula is CaS. 5. Check: electrons lost by one calcium (2) equal electrons gained by one sulfur (2).

Heavier p-block metals

Near the bottom of groups 13 to 15, metals often keep their outer s pair and lose only their p electrons. Tin and lead form 4+ ions by losing all four valence electrons, but they also form 2+ ions by losing just the two p electrons, and for lead the 2+ ion is the more common; thallium forms \(\mathrm{Tl^+}\) as well as \(\mathrm{Tl^{3+}}\), and bismuth forms \(\mathrm{Bi^{3+}}\). This tendency of the heavy elements' valence s electrons to stay put is called the inert pair effect. Lead, \(\mathrm{[Xe]\,4f^{14}\,5d^{10}\,6s^2\,6p^2}\), becomes \(\mathrm{Pb^{2+}}\), \(\mathrm{[Xe]\,4f^{14}\,5d^{10}\,6s^2}\). These ions do not have noble-gas configurations, which is why the octet idea alone cannot predict them.

Transition metal cations

Transition metals mostly form ions of 2+ or 3+, often more than one, which is why their names carry Roman numerals. They do not reach a noble-gas configuration. The rule to remember is that the outer s electrons leave first, even though they filled before the d electrons. Manganese, \(\mathrm{[Ar]\,3d^5\,4s^2}\), loses its two 4s electrons to form \(\mathrm{Mn^{2+}}\), \(\mathrm{[Ar]\,3d^5}\). Copper, \(\mathrm{[Ar]\,3d^{10}\,4s^1}\), forms \(\mathrm{Cu^+}\), \(\mathrm{[Ar]\,3d^{10}}\), and \(\mathrm{Cu^{2+}}\), \(\mathrm{[Ar]\,3d^9}\).

Worked example: the two ions of cobalt

Cobalt forms \(\mathrm{CoCl_2}\) and \(\mathrm{CoF_3}\). Find the charge and electron configuration of cobalt in each. 1. Chloride and fluoride are both 1−, so in \(\mathrm{CoCl_2}\) cobalt is \(\mathrm{Co^{2+}}\), cobalt(II), and in \(\mathrm{CoF_3}\) it is \(\mathrm{Co^{3+}}\), cobalt(III). 2. Cobalt (Z = 27) is \(\mathrm{[Ar]\,3d^7\,4s^2}\). 3. For \(\mathrm{Co^{2+}}\), remove the two 4s electrons: \(\mathrm{[Ar]\,3d^7}\). 4. For \(\mathrm{Co^{3+}}\), remove both 4s electrons and then one 3d electron: \(\mathrm{[Ar]\,3d^6}\). 5. Check by counting: Co has 27 electrons, so the ions have 25 and 24; argon's 18 plus 7 is 25 and plus 6 is 24.

Lattices, not molecules

An ionic solid contains no separate molecules. In sodium chloride each \(\mathrm{Na^+}\) is surrounded by six \(\mathrm{Cl^-}\) ions and each \(\mathrm{Cl^-}\) by six \(\mathrm{Na^+}\), repeating in three dimensions; no chloride belongs to any one sodium. The formula therefore gives only the simplest ratio of ions that makes the compound neutral, called a formula unit, as you met in the topic on ionic and molecular compounds. Some ionic compounds contain both kinds of bonding: in potassium nitrate, \(\mathrm{KNO_3}\), the nitrogen and oxygen atoms share electrons within each \(\mathrm{NO_3^-}\) ion, while \(\mathrm{K^+}\) and \(\mathrm{NO_3^-}\) attract each other ionically.

Common mistakes to avoid

First, removing d electrons before s electrons from a transition metal: \(\mathrm{Fe^{2+}}\) is \(\mathrm{[Ar]\,3d^6}\), not \(\mathrm{[Ar]\,3d^4\,4s^2}\). Second, assuming every ion has a noble-gas configuration; \(\mathrm{Pb^{2+}}\), \(\mathrm{Sn^{2+}}\) and the transition metal ions do not. Third, calling an ionic formula a molecule. Fourth, thinking ionic solids conduct electricity; only melted or dissolved ones do. Fifth, believing that forming ions from atoms releases energy by itself; for sodium and chlorine it costs energy, and the lattice pays it back.

Key takeaways

Ionic bonds are electrostatic attractions between cations and anions, usually formed when a metal transfers electrons to a nonmetal. Ionic solids are hard, brittle and high-melting, and conduct only when melted or dissolved. Main-group metals lose all their valence electrons and nonmetals gain enough to fill their s and p subshells, so both often become isoelectronic with a noble gas. Heavy p-block metals may keep their s pair (the inert pair effect), and transition metals lose their outer s electrons before any d electrons. The energy released as ions form a lattice is what makes ionic compounds stable.

Flashcards

Flashcard

Ionic bond

Electrostatic attraction between oppositely charged ions

Usually a metal cation with a nonmetal anion.

Test your understanding

Question 1 of 5

Iron is [Ar] 3d⁶ 4s². What is the electron configuration of Fe³⁺?

Question 2 of 5

Which ion is isoelectronic with neon?

Question 3 of 5

Why does molten sodium chloride conduct electricity when solid sodium chloride does not?

Question 4 of 5

Selenium is in group 16. What ion does it usually form in ionic compounds?

Question 5 of 5

Turning gaseous Na and Cl atoms into Na⁺ and Cl⁻ ions costs energy overall. Why is solid sodium chloride stable anyway?

← Previous topicNext topic →