Chemistry › Section K · Solutions and colloids › Topic K.2

Electrolytes

Salt water conducts electricity and sugar water does not, because one solution contains ions and the other contains only molecules. Sorting dissolved substances by how many ions they produce explains conductivity, guides how you write equations for reactions in water, and sets up the colligative properties that come later in this section.

Why some solutions conduct

An electric current is a flow of charge, so a material conducts only if it contains charged particles that are free to move. In a metal wire those particles are electrons. In a solution they are ions: when a voltage is applied across two electrodes dipped in the liquid, cations drift towards the negative electrode and anions towards the positive one. Nerve impulses, the lead-acid battery in a car and the sodium and potassium ions listed on a sports drink all rely on dissolved ions. Substances that produce ions in water are called electrolytes; substances that dissolve without producing ions are nonelectrolytes.

Strong, weak and nonelectrolytes

A simple test circuit sorts solutes into three groups. Put two electrodes and a light bulb in series with a battery, then dip the electrodes into solutions of equal concentration. A strong electrolyte converts essentially all of its dissolved formula units or molecules into ions, so the bulb glows brightly. A weak electrolyte converts only a small fraction, so the bulb glows dimly. A nonelectrolyte produces no ions and the bulb stays dark. A meter that measures current gives the same ranking with numbers, and a solution's conductivity rises as the concentration of its ions rises. Ion charge and speed matter too: hydronium ions move unusually fast, so a strong acid conducts better than a salt giving the same number of ions.

Ionic electrolytes: dissociation

Ionic compounds are already made of ions, but in the solid the ions are locked in a lattice and cannot move, so solid salt does not conduct. When the compound dissolves, ion-dipole attractions to water free the ions, which spread through the solution as hydrated ions. This separation of existing ions is dissociation, a physical change:

\mathrm{K_2SO_4(s) \rightarrow 2K^+(aq) + SO_4^{2-}(aq)}

A polyatomic ion such as sulfate stays in one piece. Dissolved ionic compounds dissociate almost completely, so they are strong electrolytes. That includes compounds that barely dissolve: the little silver chloride that dissolves is present as ions. Melting a salt frees its ions too, so molten salts conduct.

Worked example: counting ions

What are the ion concentrations in 0.150 M calcium chloride, \(\mathrm{CaCl_2}\), and in 0.0200 M aluminium sulfate, \(\mathrm{Al_2(SO_4)_3}\)? 1. Write each dissociation: \(\mathrm{CaCl_2 \rightarrow Ca^{2+} + 2Cl^-}\) and \(\mathrm{Al_2(SO_4)_3 \rightarrow 2Al^{3+} + 3SO_4^{2-}}\). 2. Multiply by the coefficients: \(\mathrm{[Ca^{2+}]}\) = 0.150 M and \(\mathrm{[Cl^-]} = 2 \times 0.150 = 0.300\) M, a total of 0.450 M of ions. 3. For the sulfate: \(\mathrm{[Al^{3+}]} = 2 \times 0.0200 = 0.0400\) M and \(\mathrm{[SO_4^{2-}]} = 3 \times 0.0200 = 0.0600\) M, a total of 0.100 M. 4. Check the charges: \(0.150(+2) + 0.300(-1) = 0\) and \(0.0400(+3) + 0.0600(-2) = 0\), so each solution is neutral, as it must be.

Molecular electrolytes: ionisation

Some molecular compounds contain no ions at all, yet their solutions conduct. Pure hydrogen chloride is a gas of covalent HCl molecules, but in water each molecule hands a hydrogen ion to a water molecule:

\mathrm{HCl(g) + H_2O(l) \rightarrow H_3O^+(aq) + Cl^-(aq)}

This is ionisation, a chemical reaction that creates ions that were not there before. For HCl it goes essentially to completion, so hydrochloric acid is a strong electrolyte. The same is true of the other strong acids listed in the earlier topic on classifying reactions, such as nitric and perchloric acid. Ionic hydroxides such as NaOH, the strong bases, are strong electrolytes by dissociation.

Weak electrolytes

Most acids are weak: they react with water only partly, and the reaction runs in both directions, which a double arrow shows:

\mathrm{CH_3COOH(aq) + H_2O(l) \rightleftharpoons H_3O^+(aq) + CH_3COO^-(aq)}

At any moment most acetic acid molecules are intact and only a few are ionised, so vinegar conducts weakly. Ammonia is a weak base that behaves the same way:

\mathrm{NH_3(aq) + H_2O(l) \rightleftharpoons NH_4^+(aq) + OH^-(aq)}\,.

The fraction ionised is often given as a percentage,

\text{percent ionisation} = \frac{[\text{amount ionised}]}{[\text{amount dissolved}]} \times 100\%

where the square brackets mean concentration in mol/L.

Worked example: how weak is vinegar's acid?

A 0.100 M acetic acid solution has \(\mathrm{[H_3O^+]} = 1.3 \times 10^{-3}\) M. What percentage of the acid is ionised? 1. Each ionised molecule makes one \(\mathrm{H_3O^+}\), so the ionised acid is \(1.3 \times 10^{-3}\) M. 2. Percent ionisation: \(\frac{1.3 \times 10^{-3}}{0.100} \times 100\% = 1.3\%\). 3. Interpret: about 99% of the molecules stay whole, so the solution holds only about 0.0026 M of ions in total, \(\mathrm{H_3O^+}\) plus \(\mathrm{CH_3COO^-}\). 4. Check: this matches the earlier rule of thumb that only about 1 percent of the molecules in 0.1 M acetic acid react, so its solution conducts far less than 0.100 M HCl.

Nonelectrolytes, and water itself

Most molecular compounds that are not acids or bases dissolve as whole, neutral molecules: sugar, ethanol, urea and glycerol are nonelectrolytes, and their solutions do not light the bulb. Pure water is very nearly a nonelectrolyte too. A tiny fraction of its molecules react with one another,

\mathrm{2H_2O(l) \rightleftharpoons H_3O^+(aq) + OH^-(aq)}\,,

giving only \(1.0 \times 10^{-7}\) M of \(\mathrm{H_3O^+}\) at 25 °C, fewer than one ion pair per 100 million molecules. Tap water, rainwater and especially seawater conduct much better, because of the ions dissolved in them, which is why electrical appliances and water are a dangerous mix.

Worked example: ranking conductivity

Rank these 0.10 M solutions from brightest bulb to darkest: glucose, sodium chloride, acetic acid and magnesium chloride. 1. Classify: \(\mathrm{MgCl_2}\) and NaCl are soluble ionic compounds, so strong; acetic acid is weak; glucose is a nonelectrolyte. 2. Count ions: \(\mathrm{MgCl_2}\) gives 3 per formula unit, 0.30 M; NaCl gives 2, 0.20 M; acetic acid, about 1.3% ionised, gives roughly 0.0026 M; glucose gives none. 3. Rank: \(\mathrm{MgCl_2}\) > NaCl > acetic acid > glucose. 4. Check: the two strong electrolytes come first, ordered by ion count, and the nonelectrolyte comes last, as the definitions require.

Common mistakes to avoid

First, confusing strong with concentrated: strength is the fraction that forms ions, while concentration is how much is dissolved, so dilute HCl is still a strong electrolyte. Second, calling a slightly soluble salt weak: silver chloride dissolves very little, but what dissolves is fully ionic. Third, mixing up dissociation, which separates ions already present, with ionisation, which creates ions by reaction. Fourth, splitting a weak acid into ions in an equation, or writing a single arrow for it. Fifth, forgetting coefficients: 0.10 M \(\mathrm{CaCl_2}\) contains 0.20 M chloride. Sixth, expecting solid ionic compounds to conduct; their ions cannot move.

Key takeaways

Electrolytes give ions in solution, so their solutions conduct; nonelectrolytes give only molecules. Strong electrolytes, soluble ionic compounds, strong acids and strong bases, form ions essentially completely; weak electrolytes, weak acids and weak bases, form only a small percentage and need a double arrow. Ionic compounds dissociate, a physical change, while acids ionise by reacting with water. Ion concentrations come from the dissociation coefficients. Conductivity at equal concentration ranks strong above weak above nonelectrolytes, and pure water conducts only very slightly.

Flashcards

Flashcard

Electrolyte

A substance that produces ions when it dissolves in water

Its solution conducts electricity.

Test your understanding

Question 1 of 5

Which of these is a weak electrolyte when dissolved in water?

Question 2 of 5

What is the concentration of chloride ions in 0.250 M aluminium chloride, AlCl₃?

Question 3 of 5

Four solutions are each 0.10 M. Which makes a conductivity-test bulb glow most brightly?

Question 4 of 5

A 0.200 M solution of a weak acid has [H₃O⁺] = 0.0040 M. What is its percent ionisation?

Question 5 of 5

How does dissolving hydrogen chloride gas in water differ from dissolving sodium chloride?

← Previous topicNext topic →