Chemistry › Section K · Solutions and colloids › Topic K.1
The dissolution process
Sugar vanishes into tea, oxygen dissolves into a lake, and a cold pack chills a sprained ankle, all because of what happens when particles of one substance spread out among another. Understanding that process explains why some things dissolve, why others do not, and why dissolving can make a solution hotter or colder.
Solutions are everywhere
A solution is a homogeneous mixture: once mixed, every sample has the same composition. Its solute particles, whether molecules, atoms or ions, are spread out one by one among solvent particles, so they never settle. A solution usually takes the physical state of its solvent, and its composition can vary continuously up to a limit. Water is not the only solvent. Air is a gas dissolved in a gas, soda water is carbon dioxide gas dissolved in a liquid, vinegar is a liquid in a liquid, seawater is solids in a liquid, and brass is zinc dissolved in solid copper.
Two things that favour dissolving
A sugar cube left in still water dissolves eventually without any stirring. Two tendencies drive this. One is a fall in energy, so an exothermic change is favoured. The other is the spreading out of matter, because a solute scattered through a solvent is far more dispersed than a solid lump and a separate liquid. A later section on thermodynamics measures this spreading as entropy. Neither tendency guarantees dissolving, but together they decide it. When nitrogen and oxygen mix, or two very similar liquids such as benzene and toluene, the energy hardly changes at all, so dispersal alone makes them mix. Such mixtures are called ideal solutions.
A three-step model
To track the energy, imagine dissolving as three separate steps. 1. Pull the solute particles apart, overcoming solute-solute attractions: this absorbs energy. 2. Make spaces in the solvent, overcoming some solvent-solvent attractions: this also absorbs energy. 3. Let solute and solvent particles attract each other, a step called solvation (or hydration when the solvent is water): this releases energy. Because enthalpy is a state function, the enthalpy of solution is the sum of the three:
If solvation releases more than the first two steps absorb, dissolving is exothermic; if less, it is endothermic.
How water dissolves an ionic solid
Water molecules are polar, slightly negative at the oxygen end and slightly positive at the two hydrogens. At the surface of a salt crystal, the oxygen ends turn towards cations and the hydrogen ends towards anions. This ion-dipole attraction tugs ions out of the lattice, and each one leaves wrapped in a shell of water molecules as a hydrated ion:
A molecular solute such as sucrose behaves differently. Its molecules separate from each other and are hydrated through hydrogen bonds, but they stay whole:
Worked example: salt's tiny heat of solution
Separating 1 mol of solid sodium chloride into gaseous ions takes about +787 kJ, and hydrating those ions has ΔH ≈ −783 kJ. (The solvent step is folded into the hydration value here.) Is dissolving salt exothermic or endothermic? 1. Add the steps: \(\Delta H_{\text{soln}} \approx +787 + (-783) = +4\) kJ mol⁻¹. 2. The sign is positive, so dissolving is slightly endothermic. 3. Check against experience: salt stirred into water barely changes its temperature, consistent with a value close to zero. 4. Note: \(\Delta H_{\text{soln}}\) is a small difference between two large numbers, so it can come out either positive or negative.
Hot and cold dissolving
The balance of the steps varies widely. Sodium hydroxide dissolves with \(\Delta H_{\text{soln}} \approx -44.5\) kJ mol⁻¹, because its ions are hydrated so strongly; the solution can get hot enough to be dangerous. Ammonium nitrate goes the other way, at about +25.7 kJ mol⁻¹, which is why it is used in instant cold packs: breaking an inner pouch of water lets the solid dissolve and draw heat from its surroundings. An endothermic substance dissolves only because the gain in dispersal outweighs the energy cost. When the energy cost is far larger than solvation repays, little dissolves.
Worked example: an instant cold pack
A cold pack holds 30.0 g of ammonium nitrate, \(\mathrm{NH_4NO_3}\) (80.04 g mol⁻¹), and 120.0 g of water. Taking \(\Delta H_{\text{soln}} = +25.7\) kJ mol⁻¹, a specific heat of 4.18 J g⁻¹ °C⁻¹ for the solution, and no heat gained from outside, how far does the temperature fall? 1. Moles: \(n = 30.0 \div 80.04 = 0.3748\) mol. 2. Heat absorbed: \(0.3748 \times 25.7 = 9.633\) kJ, or 9633 J. 3. Mass of solution: \(30.0 + 120.0 = 150.0\) g. 4. Temperature change: \(\Delta T = \frac{9633}{150.0 \times 4.18} = 15.4\) °C, a fall. 5. Check: \(150.0 \times 4.18 \times 15.4 \approx 9.66\) kJ, matching step 2 within rounding.
Like dissolves like
The three-step model explains a rule of thumb: substances with similar kinds of intermolecular attraction tend to dissolve in each other. Ionic and polar solutes suit polar solvents such as water, where solvation repays the cost of separating them. Ethanol mixes with water in any proportion because the two form hydrogen bonds with each other. Nonpolar solutes dissolve in nonpolar solvents, where dispersion forces are similar on all sides, so iodine dissolves readily in hexane. Oil and water do not mix: separating water molecules means breaking hydrogen bonds, and oil molecules offer only weak dispersion attractions in return, so the oil stays separate.
Worked example: predicting what dissolves
Which of potassium bromide (KBr), octane (\(\mathrm{C_8H_{18}}\)) and methanol (\(\mathrm{CH_3OH}\)) dissolve in water, and which in hexane? 1. KBr is ionic, so ion-dipole attractions to water can repay its lattice energy; hexane offers only weak dispersion forces, so KBr dissolves in water but not hexane. 2. Octane is a nonpolar hydrocarbon, like hexane, so it mixes with hexane and not with water. 3. Methanol has an O-H group that hydrogen bonds with water, so it dissolves in water. 4. Check: petrol, a mixture of octane and similar hydrocarbons, floats on water in a separate layer, just as step 2 predicts.
How fast versus how much
Stirring, crushing a solid and warming the solvent all make a solid dissolve faster: stirring carries dissolved solute away from the surface, and crushing exposes more surface. But stirring and crushing change only how quickly the solution reaches its limit, not how much solute that limit allows, while temperature can change both. Water is sometimes called the universal solvent because it dissolves so many ionic and polar substances, but the name is an exaggeration: it barely dissolves fats, waxes, most plastics or sand.
Common mistakes to avoid
First, thinking a dissolved solid has vanished: its particles are still present, only too small and too spread out to see. Second, saying separating particles releases energy: pulling apart attracting particles always absorbs energy, and only solvation releases it. Third, assuming every substance that dissolves does so exothermically; ammonium nitrate shows that dispersal can drive an endothermic change. Fourth, writing molecular solutes such as sugar as ions. Fifth, confusing dissolving faster with dissolving more: stirring speeds the process but does not raise the limit.
Key takeaways
A solution is homogeneous, with solute particles dispersed one by one so they never settle. Dissolving is favoured by a fall in energy and by the dispersal of matter. The enthalpy of solution is the sum of two energy-absorbing separation steps and one energy-releasing solvation step, so it can be negative, as for sodium hydroxide, or positive, as for ammonium nitrate. Water hydrates ions through ion-dipole attractions and molecules through hydrogen bonds. Like dissolves like: polar and ionic solutes suit polar solvents, nonpolar suit nonpolar. Stirring changes the speed of dissolving, not the amount.
Flashcards
Flashcard
A homogeneous mixture with particles dispersed one by one
Test your understanding
Question 1 of 5
In the three-step model of dissolving, which steps absorb energy?
Question 2 of 5
For a certain salt, separating the ions absorbs 700 kJ mol⁻¹ and hydrating them releases 720 kJ mol⁻¹. What is ΔH(soln)?
Question 3 of 5
Ammonium nitrate (80.04 g mol⁻¹) has ΔH(soln) = +25.7 kJ mol⁻¹. How much heat is involved when 16.0 g of it dissolves?
Question 4 of 5
Which substance dissolves most readily in hexane, C₆H₁₄?
Question 5 of 5
Why does ammonium nitrate dissolve in water even though the process is endothermic?
