Chemistry › Section E · Thermochemistry › Topic E.3

Enthalpy and Hess's law

Most reactions happen in open containers at constant pressure, and the heat they exchange there has its own name: the enthalpy change, ΔH. Because enthalpy depends only on where a reaction starts and ends, you can add known reactions together to find the ΔH of reactions nobody can measure directly.

Internal energy and the first law

A system's internal energy, U, is the total kinetic and potential energy of its particles. It changes in two ways: heat can flow in or out, and work can be done on the system or by it. The first law of thermodynamics puts this as

\Delta U = q + w

Both signs follow the system: q is positive when heat flows in, and w is positive when the surroundings do work on the system. When a gas expands and pushes back the atmosphere, the system does work, so w is negative. If a gas absorbs 150 J of heat and does 60 J of work on a piston, \(\Delta U = 150 + (-60) = +90\) J.

State functions

A state function depends only on the present state of a system, not on how it got there. Think of riding from a car park to a rooftop restaurant: your change in height is the same by lift or by stairs, but the distance you walk is not. Internal energy, enthalpy, temperature, pressure and volume are state functions. Heat and work are not: the same ΔU can be split between q and w in different ways, depending on the path. This idea is what makes Hess's law work.

Enthalpy: heat at constant pressure

Enthalpy is defined as \(H = U + PV\). Only changes in H can be measured, not its absolute value. When a process runs at constant pressure and the only work is expansion against the surroundings, the enthalpy change equals the heat exchanged:

\Delta H = q_p

Reactions in open beakers, and in a coffee-cup calorimeter, run at constant atmospheric pressure, so the heat measured there is ΔH. A bomb calorimeter, at constant volume, measures ΔU instead; the two differ by the expansion work, which is small unless the amount of gas changes. As with q, ΔH < 0 means exothermic and ΔH > 0 means endothermic.

Thermochemical equations

A thermochemical equation is a balanced equation, with physical states, followed by ΔH for the amounts in moles exactly as written:

\mathrm{2H_2(g) + O_2(g) \rightarrow 2H_2O(l)} \qquad \Delta H = -571.6 \text{ kJ}

Enthalpy is extensive, so halving the coefficients halves ΔH: forming 1 mol of liquid water gives −285.8 kJ. Fractional coefficients are allowed, because they count moles, not molecules. Reversing an equation reverses the sign of ΔH: splitting 2 mol of liquid water into its elements needs +571.6 kJ. And states matter: forming 2 mol of water vapour instead of liquid releases only 483.6 kJ.

Standard enthalpies of combustion and formation

A degree sign, as in ΔH°, marks standard conditions: gases at 1 bar, solutions at 1 M, and substances in their most stable forms, with tables usually at 25 °C. The standard enthalpy of combustion, ΔH°c, is the enthalpy change when 1 mol of a substance burns completely in oxygen, with the products in their standard states, so water as H₂O(l). The standard enthalpy of formation, ΔH°f, is the enthalpy change when 1 mol of a compound forms from its elements in their standard states:

\mathrm{Na(s) + \tfrac{1}{2}Cl_2(g) \rightarrow NaCl(s)} \qquad \Delta H^\circ_f = -411.2 \text{ kJ mol}^{-1}

By definition, ΔH°f is zero for an element in its standard state, such as O₂(g), Fe(s), Br₂(l) or graphite. Other forms are not zero: Br₂(g) is +30.9 and diamond +1.9 kJ mol⁻¹.

Worked example: burning methane

Methane, the main component of natural gas, has ΔH°c ≈ −890 kJ mol⁻¹ for

\mathrm{CH_4(g) + 2O_2(g) \rightarrow CO_2(g) + 2H_2O(l)}\,.

How much heat does burning 40.0 g of methane release? 1. Moles: the molar mass of CH₄ is 16.04 g mol⁻¹, so n = 40.0 ÷ 16.04 = 2.494 mol. 2. Scale ΔH with the amount: \(\Delta H = 2.494 \times (-890) = -2.22 \times 10^3\) kJ. 3. Interpret: the negative sign means 2.22 × 10³ kJ of heat is released. 4. Check: 40 g is roughly 2.5 mol, and 2.5 × 890 ≈ 2,200 kJ.

Hess's law

Hess's law states that when a set of steps adds up to an overall reaction, the overall ΔH equals the total of the steps' ΔH values. It holds because enthalpy is a state function: the change depends only on the start and end, not the route. In practice you rearrange known thermochemical equations until they add up to the one you want. Reverse an equation and you change the sign of its ΔH; multiply it by a factor and you multiply ΔH by the same factor. Any substance that appears on both sides of the summed equations cancels.

Worked example: Hess's law in sulfuric acid manufacture

Find ΔH for \(\mathrm{2SO_2(g) + O_2(g) \rightarrow 2SO_3(g)}\), given (A) \(\mathrm{S(s) + O_2(g) \rightarrow SO_2(g)}\), ΔH = −296.8 kJ, and (B) \(\mathrm{2S(s) + 3O_2(g) \rightarrow 2SO_3(g)}\), ΔH = −791.4 kJ. 1. The target needs 2SO₂ as a reactant, so reverse (A) and double it: \(\mathrm{2SO_2(g) \rightarrow 2S(s) + 2O_2(g)}\), ΔH = +593.6 kJ. 2. (B) already has 2SO₃ as a product, so keep it. 3. Add them: 2S cancels, and 3O₂ on the left minus 2O₂ on the right leaves O₂, giving exactly the target. 4. Sum: ΔH = +593.6 + (−791.4) = −197.8 kJ. 5. Check: the step is exothermic, so industrial reactors must remove heat.

Enthalpies of reaction from formation values

Hess's law gives a shortcut. Imagine breaking every reactant into its elements, which costs −ΔH°f for each, then building every product from those elements, which gives +ΔH°f for each. The elements cancel, leaving

\Delta H^\circ_{\text{rxn}} = \sum n\,\Delta H^\circ_f(\text{products}) - \sum n\,\Delta H^\circ_f(\text{reactants})

where n is each substance's coefficient. Elements in their standard states contribute zero. One table of formation values gives ΔH° for thousands of reactions, including ones too dangerous to run.

Worked example: the thermite reaction

Thermite,

\mathrm{2Al(s) + Fe_2O_3(s) \rightarrow Al_2O_3(s) + 2Fe(s)}\,,

is used to weld railway rails. Given ΔH°f(Al₂O₃) = −1675.7 and ΔH°f(Fe₂O₃) = −824.2 kJ mol⁻¹, find ΔH°. 1. Products: (−1675.7) + 2(0) = −1675.7 kJ. 2. Reactants: 2(0) + (−824.2) = −824.2 kJ. 3. Subtract: ΔH° = −1675.7 − (−824.2) = −851.5 kJ, strongly exothermic, enough to produce molten iron. 4. Test the method on methane, with ΔH°f values of −74.6 for CH₄(g), −393.5 for CO₂(g) and −285.8 for H₂O(l): \([-393.5 + 2(-285.8)] - [-74.6] = -890.5\) kJ, agreeing with ΔH°c ≈ −890 kJ mol⁻¹.

Common mistakes to avoid

First, reversing an equation without changing the sign of ΔH. Second, scaling the coefficients but not ΔH, or forgetting to multiply ΔH°f values by coefficients. Third, subtracting in the wrong order: it is products minus reactants. Fourth, giving elements in their standard states a non-zero ΔH°f, or treating a compound such as H₂O as zero. Fifth, ignoring physical states: H₂O(l) and H₂O(g) have different ΔH°f values. Sixth, treating heat from a bomb calorimeter as exactly ΔH; it measures ΔU.

Key takeaways

The first law gives ΔU = q + w, with signs from the system's view. Enthalpy, H = U + PV, is a state function, and at constant pressure ΔH = q_p: negative for exothermic, positive for endothermic. A thermochemical equation's ΔH matches the moles as written; scale it with the coefficients, flip its sign on reversal, and show states. ΔH°f is the enthalpy change for forming 1 mol of a compound from its elements, and is zero for elements in their standard states. Hess's law adds the ΔH of steps; in shortcut form, ΔH° = Σ n ΔH°f(products) − Σ n ΔH°f(reactants).

Flashcards

Flashcard

Internal energy, U

The total kinetic and potential energy of a system's particles

Changes only through heat and work.

Test your understanding

Question 1 of 5

A system absorbs 250 J of heat and does 90 J of work on its surroundings. What is ΔU for the system?

Question 2 of 5

Given 2H₂(g) + O₂(g) → 2H₂O(l), ΔH = −571.6 kJ, what is ΔH for H₂O(l) → H₂(g) + ½O₂(g)?

Question 3 of 5

Given H₂(g) + ½O₂(g) → H₂O(l), ΔH = −285.8 kJ, and H₂(g) + ½O₂(g) → H₂O(g), ΔH = −241.8 kJ, what is ΔH for H₂O(l) → H₂O(g)?

Question 4 of 5

Using ΔH°f values of −824.2 for Fe₂O₃(s), −110.5 for CO(g) and −393.5 kJ mol⁻¹ for CO₂(g), what is ΔH° for Fe₂O₃(s) + 3CO(g) → 2Fe(s) + 3CO₂(g)?

Question 5 of 5

Which substance has a standard enthalpy of formation of exactly zero?

← Previous topicNext topic →