Chemistry › Section E · Thermochemistry › Topic E.2

Calorimetry

You cannot see heat, but you can measure what it does. Calorimetry turns a temperature change in water or a steel bomb into the heat released or absorbed by a reaction, and it is how food labels, fuel ratings and much of thermochemistry get their numbers.

Measuring heat by its effects

No meter reads heat directly. Instead, chemists let a process exchange heat with something whose response is known, usually water, and measure the temperature change. That technique is calorimetry, and the insulated device that holds the process is a calorimeter. Through q = mcΔT, a measured ΔT in a known mass of water gives the heat it gained or lost. Calorimeters range from nested foam cups in a school laboratory to steel vessels that rate fuels and foods.

The key idea: heat lost equals heat gained

A calorimeter is built so that, ideally, no heat enters or leaves it. Energy is conserved, so all the heat released by the system is taken up by the surroundings inside the calorimeter, and the two heats add to zero:

q_{\text{system}} + q_{\text{surroundings}} = 0 \quad\Rightarrow\quad q_{\text{rxn}} = -q_{\text{surroundings}}

The minus sign is the heart of every calorimetry problem. If the water warms, its q is positive, so the reaction's q is negative: the reaction is exothermic. If the water cools, the reaction absorbed heat and is endothermic.

Two substances reaching one temperature

The simplest case involves no reaction at all. Drop a hot piece of metal into cool water inside a calorimeter, and heat flows from the metal to the water until both reach the same final temperature, \(T_f\). Then

m_{\text{metal}}\,c_{\text{metal}}\,(T_f - T_{i,\text{metal}}) + m_{\text{water}}\,c_{\text{water}}\,(T_f - T_{i,\text{water}}) = 0

The metal's term is negative because it cools; the water's is positive because it warms. You can solve for any one unknown, such as the final temperature or the metal's specific heat. For water, 1 mL has a mass of about 1.00 g.

Worked example: a hot bolt in water

A 120.0 g iron bolt at 98.0 °C is placed in 150.0 g of water at 21.5 °C. Iron's specific heat is 0.449 J g⁻¹ °C⁻¹. What is the final temperature? 1. Write the balance: \(120.0(0.449)(T_f - 98.0) + 150.0(4.184)(T_f - 21.5) = 0\). 2. Multiply out the constants: \(53.88(T_f - 98.0) + 627.6(T_f - 21.5) = 0\). 3. Collect terms: \(681.48\,T_f = 5280.2 + 13{,}493.4 = 18{,}773.6\). 4. Solve: \(T_f = 27.5\) °C. 5. Check with the unrounded 27.55 °C: the iron loses 53.88 × 70.45 ≈ 3.80 kJ and the water gains 627.6 × 6.05 ≈ 3.80 kJ. The water barely warms because of its far larger specific heat.

The coffee-cup calorimeter

For reactions in solution, a simple calorimeter is two nested polystyrene cups with a lid, a thermometer and a stirrer. The reaction is the system and the solution is the surroundings. Three standard assumptions follow: the solution has the density and specific heat of water (1.00 g mL⁻¹ and 4.184 J g⁻¹ °C⁻¹), the cups absorb a negligible amount of heat, and no heat escapes to the room. Then \(q_{\text{rxn}} = -m_{\text{soln}}\,c\,\Delta T\), where the mass is that of the whole mixture. Because the cup is open to the atmosphere, the heat measured is the heat at constant pressure, which the next topic links to enthalpy.

Worked example: neutralising an acid

A student combines 60.0 mL of 1.00 M HCl and 60.0 mL of 1.00 M NaOH, both at 22.15 °C, in a coffee-cup calorimeter, and the temperature climbs to 28.85 °C. Find the heat released per mole of water formed. 1. Mass of solution: 120.0 mL × 1.00 g mL⁻¹ = 120. g. 2. Heat gained by the solution: \(q_{\text{soln}} = 120. \times 4.184 \times 6.70 = 3364\) J. 3. Heat of reaction: \(q_{\text{rxn}} = -3364\) J = −3.36 kJ; negative, so exothermic. 4. Moles reacting: 0.0600 L × 1.00 mol L⁻¹ = 0.0600 mol of each, forming 0.0600 mol of water. 5. Per mole: 3.364 kJ ÷ 0.0600 mol = 56.1 kJ released per mole, close to the accepted 55.8 kJ for a strong acid and a strong base.

When the solution gets colder

An instant cold pack dissolves ammonium nitrate in water, and the process is endothermic. Suppose a salt dissolves in a coffee-cup calorimeter holding 50.0 g of water, and the temperature falls from 23.0 °C to 18.4 °C. The solution's heat is \(q_{\text{soln}} = 50.0 \times 4.184 \times (-4.6) = -962\) J: it lost heat. So \(q_{\text{rxn}} = +962\) J, or +0.96 kJ to the two significant figures that ΔT allows, and the positive sign confirms an endothermic process. The dissolving salt drew heat out of the water, which is why a cold pack feels cold.

The bomb calorimeter

Combustion releases a lot of heat and makes gases, so it is measured in a bomb calorimeter. The sample sits in a sealed steel vessel, the bomb, filled with high-pressure oxygen and immersed in water inside an insulated jacket. A current through a fine wire ignites the sample, and the bomb and water absorb the heat. Their combined heat capacity, \(C_{\text{cal}}\), is found by calibration: burning a standard such as benzoic acid, which releases a known 26.43 kJ per gram. Then \(q_{\text{rxn}} = -C_{\text{cal}}\,\Delta T\). The bomb's volume is fixed, so this heat is measured at constant volume, not constant pressure.

Worked example: burning sugar in a bomb

1. Calibrate: burning 1.150 g of benzoic acid releases 1.150 × 26.43 = 30.39 kJ and raises the temperature by 3.042 °C, so \(C_{\text{cal}} = 30.39 \div 3.042 = 9.992\) kJ °C⁻¹. 2. Measure: 1.024 g of sucrose, \(\text{C}_{12}\text{H}_{22}\text{O}_{11}\), is burned in the same bomb, and the temperature rises by 1.690 °C. 3. Heat absorbed by the calorimeter: 9.992 × 1.690 = 16.89 kJ. 4. Heat of reaction: \(q_{\text{rxn}} = -16.89\) kJ, so the combustion is exothermic. 5. Per gram: 16.89 ÷ 1.024 = 16.49 kJ g⁻¹, which matches the accepted value of about 16.5 kJ g⁻¹ for sucrose.

Food energy and Calories

Food labels use averages built from bomb-calorimeter heats of combustion, corrected for the energy the body cannot digest or loses in urine: about 4 Calories per gram of protein, 4 per gram of carbohydrate and 9 per gram of fat, with indigestible fibre discounted. Protein burns at nearly 6 Cal g⁻¹ in a bomb, but the body cannot fully oxidise its nitrogen. A serving with 10 g of fat, 30 g of carbohydrate and 8 g of protein provides about \(10(9) + 30(4) + 8(4) = 242\) Calories, or \(242 \times 4.184 \approx 1.01 \times 10^3\) kJ. Because these are averages, a label is an estimate.

Common mistakes to avoid

First, dropping the minus sign: the calorimeter's q and the reaction's q are opposite in sign, so a warming solution means an exothermic reaction. Second, using the final temperature instead of ΔT in q = mcΔT. Third, using only the volume of one solution: after mixing, the mass is that of the whole mixture. Fourth, giving the metal and the water different final temperatures; at thermal equilibrium they share one. Fifth, using q = mcΔT for the water alone in a bomb, when \(C_{\text{cal}}\) covers the whole calorimeter. Sixth, reporting more significant figures than ΔT allows.

Key takeaways

Calorimetry measures heat through the temperature change of known surroundings. Energy is conserved, so \(q_{\text{rxn}} = -q_{\text{surroundings}}\): a warming calorimeter means an exothermic reaction, a cooling one an endothermic reaction. A hot metal and cool water end at one temperature, with heats adding to zero. A coffee-cup calorimeter works at constant pressure and treats the solution as water. A bomb calorimeter works at constant volume, is calibrated with a standard such as benzoic acid, and gives \(q_{\text{rxn}} = -C_{\text{cal}}\,\Delta T\).

Flashcards

Flashcard

Calorimetry

Measuring heat from the temperature change of surroundings with a known heat capacity

No instrument reads heat directly.

Test your understanding

Question 1 of 5

A hot piece of metal is dropped into 200.0 g of water in a calorimeter, and the water warms from 22.0 °C to 34.5 °C. What is q for the metal?

Question 2 of 5

A reaction in 50.0 g of solution in a coffee-cup calorimeter raises the temperature from 19.8 °C to 31.2 °C. What is q for the reaction?

Question 3 of 5

A salt dissolves in a coffee-cup calorimeter holding 75.0 g of water, and the temperature falls by 4.20 °C. What is q for the dissolving?

Question 4 of 5

A bomb calorimeter has C(cal) = 10.5 kJ °C⁻¹. Burning a sample raises its temperature by 2.36 °C. What is q for the combustion?

Question 5 of 5

Why is a bomb calorimeter calibrated before it is used?

← Previous topicNext topic →