Chemistry › Section M · Equilibrium › Topic M.4

Equilibrium calculations

Knowing K is only useful if you can turn it into amounts: how much product a reactor will hold, or how much of a substance survives in solution. A simple table and a little algebra do that for almost every equilibrium you will meet.

Three kinds of question

Equilibrium problems come in three main forms. You may know the equilibrium concentrations, or enough to find them, and want K. You may know K and all but one equilibrium concentration, and want the missing one. Or you may know K and the starting amounts, and want everything at equilibrium. The first two need only careful bookkeeping and substitution. The third needs you to solve an equation, and the topic shows the three ways that usually goes: a perfect square, a quadratic, or a shortcut that works when K is small. In every case, concentrations go into the K expression exactly as the previous topics set it up.

ICE tables

An ICE table keeps the bookkeeping straight. Write the balanced equation, then one row each for the Initial concentrations, the Change, and the Equilibrium concentrations, with one column per species. The changes are linked by the coefficients: for \(\mathrm{2SO_2 + O_2 \rightleftharpoons 2SO_3}\), if [O₂] changes by \(-x\), then [SO₂] changes by \(-2x\) and [SO₃] by \(+2x\). Signs follow the direction of the net reaction, which you can find by comparing Q with K. Each equilibrium entry is the initial value plus the change. Pure solids and liquids get no column.

Worked example: finding K from one measurement

A flask at a fixed high temperature starts with 0.400 M SO₂ and 0.200 M O₂. At equilibrium [SO₃] = 0.300 M. Find K for \(\mathrm{2SO_2(g) + O_2(g) \rightleftharpoons 2SO_3(g)}\). 1. Initial: SO₂ 0.400, O₂ 0.200, SO₃ 0. 2. Change: SO₃ rose by 0.300, so \(2x = 0.300\) and \(x = 0.150\); SO₂ falls by 0.300 and O₂ by 0.150. 3. Equilibrium: SO₂ 0.100 M, O₂ 0.050 M, SO₃ 0.300 M. 4. Substitute: \(K = \frac{0.300^2}{0.100^2 \times 0.050} = 180\). 5. Check: K > 1 fits a mixture that holds more SO₃ than SO₂.

Finding a missing concentration

When K is known and every equilibrium concentration but one is measured, rearrange the K expression for the unknown. For ammonia synthesis, take \(K_c = 0.105\) at 472 °C, as in the topic on equilibrium constants. If an equilibrium mixture holds 0.200 M N₂ and 0.300 M H₂, then

[\mathrm{NH_3}]^2 = K_c[\mathrm{N_2}][\mathrm{H_2}]^3 = 0.105 \times 0.200 \times 0.300^3 = 5.67 \times 10^{-4}

so \([\mathrm{NH_3}] = 0.0238\) M. Take the positive root, since a concentration cannot be negative, and check by substituting back into the K expression.

Worked example: a perfect square

For \(\mathrm{H_2(g) + I_2(g) \rightleftharpoons 2HI(g)}\), K = 50 at about 450 °C. Start with 0.100 M H₂ and 0.100 M I₂. Find the equilibrium mixture. 1. ICE: H₂ and I₂ each become \(0.100 - x\); HI becomes \(2x\). 2. Substitute: \(\frac{(2x)^2}{(0.100 - x)^2} = 50\). 3. Both sides are perfect squares, so take square roots: \(\frac{2x}{0.100 - x} = 7.07\). 4. Solve: \(2x = 0.707 - 7.07x\), so \(x = 0.0780\). 5. Equilibrium: [HI] = 0.156 M, [H₂] = [I₂] = 0.022 M, the values met in the first topic of this chapter. 6. Check: \(\frac{0.156^2}{0.022^2} \approx 50\).

Worked example: the quadratic case

At a certain temperature, \(\mathrm{PCl_5(g) \rightleftharpoons PCl_3(g) + Cl_2(g)}\) has \(K_c = 0.040\). Start with 0.200 M PCl₅. 1. ICE: PCl₅ becomes \(0.200 - x\); PCl₃ and Cl₂ each become \(x\). 2. Substitute: \(\frac{x^2}{0.200 - x} = 0.040\). 3. Rearrange: \(x^2 + 0.040x - 0.0080 = 0\). 4. Quadratic formula: \(x = \frac{-0.040 \pm \sqrt{0.040^2 + 4(0.0080)}}{2} = \frac{-0.040 \pm 0.1833}{2}\). 5. The roots are 0.0717 and −0.1117; the negative one would give negative concentrations, so reject it. 6. Equilibrium: [PCl₃] = [Cl₂] = 0.072 M, [PCl₅] = 0.128 M. 7. Check: \(\frac{0.0717^2}{0.1283} = 0.040\).

The small-x approximation

When K is very small, so little reacts that x is tiny compared with the starting concentration. Then \(0.100 - x \approx 0.100\), and the equation becomes easy to solve without a quadratic. The shortcut must be tested afterwards. The usual rule is the 5% check: work out \(\frac{x}{\text{initial concentration}} \times 100\%\). If it is 5% or less, the approximation is valid, because the error it causes is smaller than typical measurement uncertainty. If it is more than 5%, go back and solve the full equation. This shortcut is used constantly for weak acids and bases in the next chapter, where K values are often small.

Worked example: a very small K

Phosgene decomposes as \(\mathrm{COCl_2(g) \rightleftharpoons CO(g) + Cl_2(g)}\), with \(K_c\) about \(2.2 \times 10^{-10}\) at 100 °C. Find [CO] at equilibrium from 0.100 M COCl₂. 1. ICE: COCl₂ becomes \(0.100 - x\); CO and Cl₂ each become \(x\). 2. Assume x is small: \(\frac{x^2}{0.100} = 2.2 \times 10^{-10}\). 3. Solve: \(x^2 = 2.2 \times 10^{-11}\), so \(x = 4.7 \times 10^{-6}\) M. 4. The 5% check: \(\frac{4.7 \times 10^{-6}}{0.100} \times 100\% = 0.0047\%\), far below 5%, so the shortcut is valid. 5. Result: [CO] = [Cl₂] = \(4.7 \times 10^{-6}\) M and [COCl₂] = 0.100 M.

When the shortcut fails

Try the small-x shortcut on the PCl₅ problem, where \(K_c = 0.040\) is not small. Assuming \(0.200 - x \approx 0.200\) gives \(x^2 = 0.0080\) and \(x = 0.0894\) M. The 5% check gives \(\frac{0.0894}{0.200} \times 100\% = 45\%\), far above 5%, so the approximation is invalid. Indeed, the quadratic gave 0.0717 M, so the shortcut overestimated x by about 25%. A quick guide before you start: the shortcut usually passes when the initial concentration is at least several hundred times larger than K, but the 5% check, done after solving, is what decides.

Common mistakes to avoid

First, putting initial concentrations, not equilibrium ones, into the K expression. Second, forgetting the coefficients in the Change row: 2SO₃ changes by 2x, not x. Third, using moles instead of concentrations; divide by the volume first. Fourth, keeping a negative root, or a root larger than a starting concentration, which gives impossible negative amounts. Fifth, using the small-x approximation without the 5% check. Sixth, forgetting that x is the change, not the answer: the equilibrium concentration is the initial value plus the change.

Key takeaways

An ICE table lists Initial, Change and Equilibrium concentrations, with changes in the ratio of the coefficients and signs set by the direction of reaction. Equilibrium concentrations go into the K expression. Rearrange K to find a missing concentration. To find a whole equilibrium mixture, solve for x: take square roots when both sides are perfect squares, use the quadratic formula otherwise, and reject roots that give negative concentrations. When K is small, the approximation that x is negligible saves work, but only if the 5% check passes.

Flashcards

Flashcard

ICE table

Rows for Initial, Change and Equilibrium concentrations

One column per species in the K expression.

Test your understanding

Question 1 of 5

A flask starts with 0.100 M N₂O₄ only. At equilibrium, for N₂O₄(g) ⇌ 2NO₂(g), [NO₂] = 0.040 M. What is Kc?

Question 2 of 5

For A(aq) ⇌ B(aq) + C(aq), K = 1.0 × 10⁻⁸. Starting from 0.25 M A, what is [B] at equilibrium?

Question 3 of 5

Using the small-x approximation, a student finds x = 0.012 M for a reaction that started at 0.15 M. What should the student do?

Question 4 of 5

For H₂(g) + I₂(g) ⇌ 2HI(g), K = 64 at a certain temperature. Starting from 0.20 M H₂ and 0.20 M I₂, what is [HI] at equilibrium?

Question 5 of 5

In an ICE table for 2SO₂(g) + O₂(g) ⇌ 2SO₃(g), starting with only SO₂ and O₂, the change in [O₂] is −x. What is the change in [SO₃]?

← Previous topicNext topic →