Chemistry › Section P · Thermodynamics › Topic P.4
Gibbs free energy
The second law needs entropy changes for both a system and its surroundings, which is awkward in practice. Gibbs free energy folds both into one property of the system alone, and its change tells you whether a reaction is spontaneous, how temperature affects that, and how far the reaction goes before reaching equilibrium.
One number instead of two
In the last topic, deciding whether methane burns spontaneously meant finding ΔS of the system, then ΔS of the surroundings from ΔH, then adding them. In the 1870s the American scientist Josiah Willard Gibbs showed how to combine these into a single property of the system. Chemists call it Gibbs free energy, G. For any process at constant temperature and pressure, which covers most chemistry done in open containers, the sign of its change, ΔG, answers the spontaneity question directly, using only data about the system.
Defining G and why it works
Free energy is defined as \(G = H - TS\). Because H, T and S are all state properties, so is G, and when T is held fixed
To see the link with the second law, start from \(\Delta S_{\text{univ}} = \Delta S - \frac{\Delta H}{T}\), using \(\Delta S_{\text{surr}} = -\Delta H/T\). Multiply through by −T: \(-T\Delta S_{\text{univ}} = \Delta H - T\Delta S = \Delta G\). Because T is always positive, ΔG and ΔS_univ have opposite signs. So ΔG < 0 means spontaneous, ΔG > 0 means nonspontaneous (the reverse is spontaneous), and ΔG = 0 means the system is at equilibrium.
Two ways to find ΔG°
Standard free energy changes, ΔG°, can be found from tables in two ways. First, combine ΔH° and ΔS°: \(\Delta G^\circ = \Delta H^\circ - T\Delta S^\circ\). Entropies are tabulated in J K⁻¹ but enthalpies in kJ, so divide ΔS° by 1000 first. Second, use standard free energies of formation, ΔG°f, the free energy change for forming 1 mol of a compound from its elements in their standard states:
Like ΔH°f, ΔG°f is zero for an element in its standard state. Values in kJ mol⁻¹ include CO₂(g) −394.4, H₂O(l) −237.1, H₂O(g) −228.6, CO(g) −137.2, CH₄(g) −50.5 and NH₃(g) −16.4.
Worked example: ammonia at 25 °C
Find ΔG° at 298 K for \(\mathrm{N_2(g) + 3H_2(g) \rightarrow 2NH_3(g)}\), using ΔH°f(NH₃) = −45.9 kJ mol⁻¹ and the entropies from the last topic. 1. Enthalpy: \(\Delta H^\circ = 2(-45.9) = -91.8\) kJ. 2. Entropy: \(\Delta S^\circ = 2(192.8) - [191.6 + 3(130.7)] = -198.1\) J K⁻¹ \(= -0.1981\) kJ K⁻¹. 3. Combine: \(\Delta G^\circ = -91.8 - 298(-0.1981) = -91.8 + 59.0 = -32.8\) kJ. 4. Interpret: negative, so spontaneous under standard conditions at 25 °C. 5. Check by the second method: \(2(-16.4) - 0 = -32.8\) kJ, an exact match.
Temperature and the four cases
Since T is positive, the signs of ΔH and ΔS decide how temperature acts in \(\Delta G = \Delta H - T\Delta S\). ΔH < 0 and ΔS > 0: both terms favour the change, so it is spontaneous at all temperatures. ΔH > 0 and ΔS < 0: both oppose it, so it is never spontaneous. ΔH < 0 and ΔS < 0: spontaneous at low temperatures, where ΔH dominates, but not at high ones. ΔH > 0 and ΔS > 0: spontaneous only at high temperatures, where the TΔS term wins, as with ice melting above 0 °C. In the last two cases the switch happens where ΔG = 0, at
Worked example: where ammonia synthesis stops being spontaneous
Ammonia synthesis has ΔH° = −91.8 kJ and ΔS° = −198.1 J K⁻¹. Above what temperature is it no longer spontaneous under standard conditions? 1. Both are negative, so it is spontaneous at low T only. 2. At the switch, ΔG° = 0, so \(T = \frac{\Delta H^\circ}{\Delta S^\circ} = \frac{-91{,}800}{-198.1} = 463\) K, about 190 °C. 3. Assumption: ΔH° and ΔS° barely change with temperature, so this is an estimate. 4. Check: at 298 K, ΔG° was −32.8 kJ, negative, consistent with 298 K lying below 463 K. Industrial plants still run hotter than this, because the reaction is far too slow when cold; a catalyst, high pressure and recycling of unreacted gas make up for the smaller yield.
Free energy, work and coupled reactions
ΔG also measures useful work. For a spontaneous process, −ΔG is the maximum work, other than expansion work, that it could deliver, for example as electrical work from a battery; real devices always deliver less. For a nonspontaneous process, ΔG is the minimum work needed to drive it. Because G is a state function, the ΔG values of reactions that add together also add, like ΔH in Hess's law. Living cells use this. They drive a reaction with ΔG ≈ +20 kJ mol⁻¹ by coupling it to the hydrolysis of ATP, ΔG ≈ −30.5 kJ mol⁻¹ under standard biochemical conditions, giving an overall ΔG of about −10 kJ mol⁻¹.
Free energy and equilibrium
ΔG° describes reactants and products all in their standard states. Under other conditions, \(\Delta G = \Delta G^\circ + RT \ln Q\), where Q is the reaction quotient from the equilibrium section and R = 8.314 J mol⁻¹ K⁻¹. A reaction runs in whichever direction lowers G, until G reaches its minimum. There, ΔG = 0 and Q = K, so
If ΔG° < 0, then K > 1 and products are favoured at equilibrium; if ΔG° > 0, then K < 1 and reactants are favoured; if ΔG° = 0, K = 1. Because K depends exponentially on ΔG°, a change of just 5.7 kJ mol⁻¹ at 298 K shifts K tenfold.
Worked example: an equilibrium constant from ΔG°
Find K at 298 K for ammonia synthesis, with ΔG° = −32.8 kJ. 1. Rearrange: \(\ln K = -\frac{\Delta G^\circ}{RT}\). 2. Use joules to match R: \(\ln K = -\frac{-32{,}800}{8.314 \times 298} = 13.24\). 3. Undo the logarithm: \(K = e^{13.24} = 5.6 \times 10^5\). 4. Interpret: K is much greater than 1, so at 25 °C equilibrium lies far towards ammonia, even though the reaction is too slow there to reach it. 5. Check: ΔG° is negative, so K must exceed 1. Exponentials magnify rounding, so carry several digits until the last step.
Common mistakes to avoid
First, combining ΔH in kJ with ΔS in J K⁻¹ without converting, which gives answers a thousand times wrong. Second, using °C instead of kelvin for T. Third, using log instead of ln in \(\Delta G^\circ = -RT \ln K\). Fourth, giving elements a non-zero ΔG°f. Fifth, believing a negative ΔG means a reaction is fast; it says nothing about rate. Sixth, calling ΔH > 0, ΔS > 0 reactions spontaneous at low temperature; they need high temperature. Seventh, using ΔG° when the question describes non-standard conditions, where \(\Delta G = \Delta G^\circ + RT\ln Q\) is needed.
Key takeaways
Gibbs free energy, G = H − TS, gives ΔG = ΔH − TΔS = −TΔS_univ at constant T and P: ΔG < 0 spontaneous, ΔG > 0 nonspontaneous, ΔG = 0 at equilibrium. Find ΔG° from ΔH° − TΔS°, keeping kJ and J straight, or from ΔG°f values, which are zero for elements. When ΔH and ΔS share a sign, temperature decides, switching at T = ΔH/ΔS. −ΔG is the maximum useful work, and coupled reactions add their ΔG. Under any conditions ΔG = ΔG° + RT ln Q, and at equilibrium ΔG° = −RT ln K.
Flashcards
Flashcard
G = H − TS, a state function
Test your understanding
Question 1 of 5
A reaction has ΔH° = −120.0 kJ and ΔS° = −150.0 J K⁻¹. What is ΔG° at 298 K?
Question 2 of 5
A reaction has ΔH > 0 and ΔS > 0. How does its spontaneity depend on temperature?
Question 3 of 5
A reaction has ΔH° = +178 kJ and ΔS° = +161 J K⁻¹. Above what temperature is it spontaneous under standard conditions?
Question 4 of 5
An acid has K = 1.8 × 10⁻⁵ at 298 K. What is ΔG° for its ionisation? (R = 8.314 J mol⁻¹ K⁻¹)
Question 5 of 5
Using ΔG°f values (kJ mol⁻¹) of −50.5 for CH₄(g), −394.4 for CO₂(g) and −237.1 for H₂O(l), what is ΔG° for CH₄(g) + 2O₂(g) → CO₂(g) + 2H₂O(l)?
