Chemistry › Section Q · Electrochemistry › Topic Q.2
Galvanic cells
Drop zinc into copper sulfate solution and the reaction simply warms the beaker. Separate the two halves of that reaction and connect them with a wire, and the same electron transfer becomes an electric current you can use.
Heat or electricity?
Put a strip of zinc into blue copper(II) sulfate solution and, within minutes, the zinc is coated with reddish copper, the blue colour fades and the solution warms slightly. The reaction is
Electrons pass directly from zinc atoms to copper ions touching the metal, so the energy released ends up as heat. If the zinc and the copper ions are kept apart, the only path for the electrons is through an external wire. That moving charge is an electric current, and the energy can now do useful electrical work.
Half-cells and electrochemical cells
An electrochemical cell is a device in which oxidation and reduction take place at separate electrodes, linked by an external circuit. A cell that produces electricity from a spontaneous reaction is a galvanic cell, also called a voltaic cell. A cell that uses electricity to drive a reaction that would not otherwise happen is an electrolytic cell, met later in the course. Each galvanic cell has two half-cells. A half-cell holds one redox couple, the oxidised and reduced forms of one substance, written oxidised form first, such as \(\mathrm{Zn^{2+}/Zn}\). A zinc half-cell might be a zinc bar dipping into zinc sulfate solution.
Anode and cathode
The anode is the electrode where oxidation occurs, and the cathode is where reduction occurs; "an ox" and "red cat" are handy reminders. In a galvanic cell, oxidation releases electrons into the anode, so the anode is the negative terminal. Electrons travel through the wire from anode to cathode, where they are taken up by the species being reduced, so the cathode is the positive terminal. In the zinc and copper cell, the zinc anode slowly dissolves as \(\mathrm{Zn \rightarrow Zn^{2+} + 2e^-}\), losing mass. Copper plates out on the copper cathode as \(\mathrm{Cu^{2+} + 2e^- \rightarrow Cu}\), which gains mass.
The salt bridge
With only a wire connecting them, the current would stop almost at once. Positive \(\mathrm{Zn^{2+}}\) ions build up around the anode while \(\mathrm{Cu^{2+}}\) ions are removed from the cathode solution, and the charge imbalance would oppose any further electron flow. A salt bridge prevents this. It is a tube or strip holding an electrolyte, such as potassium nitrate, whose ions do not react with either half-cell. Anions drift out of the bridge towards the anode compartment and cations towards the cathode compartment, keeping both solutions electrically neutral. The bridge carries ions, never electrons, and it stops the two solutions mixing. A porous barrier can do the same job.
Worked example: describing a zinc and copper cell
A zinc bar in 1 M \(\mathrm{ZnSO_4}\) and a copper bar in 1 M \(\mathrm{CuSO_4}\) are joined by a wire and a \(\mathrm{KNO_3}\) salt bridge. Describe the cell. 1. Oxidation: zinc is the more reactive metal, so \(\mathrm{Zn \rightarrow Zn^{2+} + 2e^-}\); zinc is the anode, the negative terminal. 2. Reduction: \(\mathrm{Cu^{2+} + 2e^- \rightarrow Cu}\); copper is the cathode, the positive terminal. 3. Electrons flow through the wire from zinc to copper. 4. In the bridge, \(\mathrm{NO_3^-}\) moves towards the zinc compartment and \(\mathrm{K^+}\) towards the copper compartment. 5. Overall: \(\mathrm{Zn + Cu^{2+} \rightarrow Zn^{2+} + Cu}\). 6. Check: two electrons are lost and two gained. This design, known as a Daniell cell, gives about 1.10 V.
Cell notation
Cell notation is a shorthand for a cell's construction. Write the anode on the left and the cathode on the right, in the order electrons and ions are met. A single vertical line marks a boundary between phases, such as a solid electrode and its solution. A double line marks the salt bridge. Species in the same phase are separated by commas, and concentrations can be added in brackets. The zinc and copper cell is
The electrodes sit at the two ends, and spectator ions, such as sulfate, are usually left out.
Inert electrodes
An electrode must conduct electricity and be a separate phase from the solution. Zinc and copper can serve as electrodes because each is a member of its own couple; these are active electrodes. But some couples have no solid metal: both iron(III) and iron(II) ions stay dissolved, and hydrogen ions are reduced to a gas. Such half-cells use an inert electrode, usually platinum or graphite, which passes electrons to or from the dissolved species without reacting itself. In notation, the inert electrode still appears at the outer end, as in \(\mathrm{\ldots||\,Fe^{3+}(aq),\ Fe^{2+}(aq)\,|\,Pt(s)}\) or \(\mathrm{Pt(s)\,|\,H_2(g)\,|\,H^+(aq)\,||\ldots}\).
Worked example: from a reaction to cell notation
Write the cell notation for a galvanic cell based on
1. Oxidation: nickel rises from 0 to +2, \(\mathrm{Ni \rightarrow Ni^{2+} + 2e^-}\), so nickel metal is the anode. 2. Reduction: \(\mathrm{Fe^{3+} + e^- \rightarrow Fe^{2+}}\); both iron species are dissolved, so this half-cell needs platinum as its cathode. 3. Electron check: one nickel atom supplies the two electrons that two iron(III) ions need. 4. Anode on the left, cathode on the right:
5. Check: electrons flow from nickel to platinum, and the iron ions share one phase, so a comma separates them.
Reading notation back into a reaction
Cell notation also works in reverse. Take
The left side is the anode, so lead is oxidised: \(\mathrm{Pb \rightarrow Pb^{2+} + 2e^-}\). The right side is the cathode, so silver ions are reduced: \(\mathrm{Ag^+ + e^- \rightarrow Ag}\). Doubling the silver half matches the electrons, and adding gives
The notation itself shows no coefficients, so balancing is always your job. As the cell runs, the lead electrode loses mass and the silver electrode gains it.
Common mistakes to avoid
First, swapping the electrode signs: in a galvanic cell the anode is negative and the cathode positive. Second, thinking the salt bridge carries electrons; it carries ions, and electrons travel only through the wire. Third, writing the cathode on the left of the notation. Fourth, using a single line where the salt bridge should be, or a line instead of a comma between ions in the same solution. Fifth, forgetting the inert electrode when neither member of a couple is a conducting solid. Sixth, copying a cell reaction from the notation without balancing the electrons.
Key takeaways
A galvanic cell separates a spontaneous redox reaction into two half-cells so electrons flow through an external circuit. Oxidation happens at the anode, the negative terminal, and reduction at the cathode, the positive terminal. Electrons move through the wire from anode to cathode, while a salt bridge lets ions move to keep both solutions neutral. Cell notation lists the anode first, with single lines for phase boundaries, a double line for the salt bridge and commas within a phase. Platinum or graphite serves as an inert electrode when a couple has no conducting solid.
Flashcards
Flashcard
An electrochemical cell that turns a spontaneous redox reaction into electricity
Test your understanding
Question 1 of 5
In a galvanic cell, where does oxidation take place, and what is the sign of that electrode?
Question 2 of 5
What is the main job of the salt bridge in a galvanic cell?
Question 3 of 5
Which is the correct cell notation for a galvanic cell based on Zn(s) + 2Ag⁺(aq) → Zn²⁺(aq) + 2Ag(s)?
Question 4 of 5
What balanced reaction takes place in the cell Cu(s) | Cu²⁺(aq) || Fe³⁺(aq), Fe²⁺(aq) | Pt(s)?
Question 5 of 5
In a zinc and copper cell with a potassium nitrate salt bridge, which way do the nitrate ions move?
