Chemistry › Section Q · Electrochemistry › Topic Q.3
Electrode and cell potentials
A zinc and copper cell gives about 1.10 V, but a lithium cell can give more than 3 V. One table of standard reduction potentials lets you predict the voltage of any pairing, and whether its reaction will run at all.
What a cell potential measures
The voltage of a galvanic cell, its cell potential \(E_{\text{cell}}\), measures how strongly the cell pushes electrons from anode to cathode. Potential is energy per unit of charge: one volt is one joule per coulomb, \(\mathrm{1\ V = 1\ J\ C^{-1}}\). A larger cell potential means each coulomb of charge delivers more energy. The value depends on which two half-cells are paired, and also on concentration, pressure and temperature. To compare cells fairly, chemists quote the standard cell potential, \(E^\circ_{\text{cell}}\), measured with all dissolved species at 1 M, all gases at 1 bar, and usually a temperature of 25 °C (298.15 K).
A reference half-cell
A voltmeter always measures a difference between two electrodes, so the potential of one half-cell can never be measured on its own. Chemists therefore chose a reference and gave it a potential of exactly 0 V by agreement. It is the standard hydrogen electrode, or SHE: a platinum electrode in 1 M \(\mathrm{H^+}\), with hydrogen gas at 1 bar bubbling over it. Its half-reaction, with \(E^\circ = 0\) V, is
Every other half-cell is measured against this one, much as heights are measured from an agreed sea level.
Standard reduction potentials
The standard reduction potential, \(E^\circ\), of a half-cell is the standard potential of a cell that has this half-cell as the cathode and the SHE as the anode. Joined to a SHE, a standard copper half-cell gives +0.34 V, with copper as the cathode: \(\mathrm{Cu^{2+}}\) is reduced more readily than \(\mathrm{H^+}\). A standard zinc half-cell gives 0.76 V, but now zinc is the anode, because hydrogen ions are reduced in preference to zinc ions. So the reduction potential of zinc is −0.76 V. Every value in the table is written for the reduction direction, which is why they are called reduction potentials.
Reading the table
Tables list each couple, oxidised form first, standing for its reduction: \(\mathrm{F_2/F^-}\) means \(\mathrm{F_2 + 2e^- \rightarrow 2F^-}\). Here are some standard reduction potentials at 25 °C, in volts:
The higher a couple sits, the more strongly its oxidised form, on the left of the half-reaction, pulls in electrons, so fluorine is the strongest oxidising agent listed. The lower a couple sits, the more readily its reduced form, on the right, gives electrons away, so lithium metal is the strongest reducing agent.
Calculating a standard cell potential
With both half-cells written as reductions,
Use the table values exactly as listed, signs included; the subtraction itself accounts for the anode running backwards as an oxidation. For the Daniell cell, \(E^\circ_{\text{cell}} = +0.34 - (-0.76) = +1.10\) V. Never multiply \(E^\circ\) by the coefficients used to balance electrons. A potential is energy per coulomb: doubling a half-reaction doubles both the energy and the charge, so their ratio stays the same. A positive \(E^\circ_{\text{cell}}\) means the reaction as written is spontaneous under standard conditions.
Worked example: a zinc and silver cell
Find the standard potential of a cell made from a zinc half-cell and a silver half-cell. 1. The cathode is the couple higher in the table: \(\mathrm{Ag^+/Ag}\), +0.80 V. The anode is \(\mathrm{Zn^{2+}/Zn}\), −0.76 V. 2. Half-reactions: \(\mathrm{Zn \rightarrow Zn^{2+} + 2e^-}\) and \(\mathrm{Ag^+ + e^- \rightarrow Ag}\). 3. Double the silver half to match electrons:
The silver potential stays +0.80 V. 4. \(E^\circ_{\text{cell}} = +0.80 - (-0.76) = +1.56\) V. 5. Check: the value is positive, as it must be for a working galvanic cell, and larger than the Daniell cell's because silver lies higher than copper.
Predicting whether a reaction will run
Any redox reaction can be tested by treating it as a cell. Find the species being reduced; its couple supplies \(E^\circ_{\text{cathode}}\). The species being oxidised supplies \(E^\circ_{\text{anode}}\). If \(E^\circ_{\text{cell}}\) is positive, the reaction is spontaneous under standard conditions. If it is negative, it is not, but the reverse reaction is, with the same value and opposite sign. A quick rule follows from the table: an oxidant on the left reacts with a reductant on the right of any couple below it. A positive potential says only that a reaction can happen; it says nothing about how fast.
Worked example: metals in acid
Will zinc or copper dissolve in 1 M hydrochloric acid, giving off hydrogen? 1. The proposed reduction is \(\mathrm{2H^+ + 2e^- \rightarrow H_2}\), so \(E^\circ_{\text{cathode}} = 0.00\) V. 2. For zinc: \(E^\circ_{\text{cell}} = 0.00 - (-0.76) = +0.76\) V. Positive, so
is spontaneous, and zinc fizzes in acid. 3. For copper: \(E^\circ_{\text{cell}} = 0.00 - (+0.34) = -0.34\) V. Negative, so copper does not dissolve, and in fact \(\mathrm{H_2}\) would reduce \(\mathrm{Cu^{2+}}\). 4. Check against experience: copper pipes and wire survive dilute hydrochloric acid, while zinc reacts readily.
Common mistakes to avoid
First, multiplying \(E^\circ\) by the coefficient of a half-reaction; potentials never scale with the amount. Second, flipping the sign of the anode value and then subtracting it as well, which counts the reversal twice. Third, choosing the cathode by the larger number without its sign: −0.13 V is higher than −0.76 V. Fourth, reading a negative reduction potential as a weak reducing agent; the more negative the value, the stronger the reducing agent on the right. Fifth, assuming a positive \(E^\circ_{\text{cell}}\) means a fast reaction.
Key takeaways
Only differences in potential can be measured, so the standard hydrogen electrode is assigned exactly 0 V. A standard reduction potential is the potential of a half-cell acting as cathode against the SHE, with solutes at 1 M and gases at 1 bar. Higher \(E^\circ\) means a stronger oxidising agent on the left; lower \(E^\circ\) means a stronger reducing agent on the right. \(E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}}\), using table values unchanged and never multiplied by coefficients. A positive value means spontaneous under standard conditions.
Flashcards
Flashcard
The voltage of a cell: energy per coulomb pushing electrons from anode to cathode
Test your understanding
Question 1 of 5
Using E° values of +0.34 V for Cu²⁺/Cu and −2.37 V for Mg²⁺/Mg, what is E°cell for Mg(s) | Mg²⁺(aq) || Cu²⁺(aq) | Cu(s)?
Question 2 of 5
Using E° values of +0.34 V for Cu²⁺/Cu and −1.66 V for Al³⁺/Al, what is E°cell for 2Al(s) + 3Cu²⁺(aq) → 2Al³⁺(aq) + 3Cu(s)?
Question 3 of 5
Using the standard reduction potentials in the reading, which species is the strongest oxidising agent?
Question 4 of 5
Under standard conditions, which metal dissolves in 1 M hydrochloric acid, giving hydrogen gas?
Question 5 of 5
What does the value E° = −0.76 V for Zn²⁺/Zn tell you?
