Chemistry › Section H · Advanced theories of covalent bonding › Topic H.2
Hybrid atomic orbitals
Carbon has only two unpaired electrons, yet methane has four identical bonds pointing to the corners of a tetrahedron. Hybrid orbitals reconcile valence bond theory with the shapes VSEPR predicts, and one count of electron groups tells you which hybrids an atom uses.
A puzzle in methane
Carbon's ground-state configuration is 1s²2s²2p². Only the two 2p electrons are unpaired, so plain valence bond theory predicts two bonds, at 90° to each other. Methane, \(\mathrm{CH_4}\), has four C–H bonds, all the same length and strength, separated by 109.5°. Water is a smaller version of the same problem: two half-filled 2p orbitals on oxygen predict 90°, but the angle is 104.5°. Pure s and p orbitals point in the wrong directions. We need orbitals that point where VSEPR says the electron groups are.
The idea of hybridisation
Hybridisation is a model in which atomic orbitals on the same atom are combined mathematically to give a new set of hybrid orbitals. Three rules govern it. The number of hybrids always equals the number of atomic orbitals mixed. The hybrids in a set are equivalent in shape and energy, with energies between those of the s and p orbitals they came from. And each hybrid has one large lobe aimed in a definite direction, so it overlaps strongly with an orbital on a neighbouring atom. Hybridisation is a way of describing the bonded atom, not a step the atom goes through before bonding.
sp³ hybrids: four groups
Mixing one 2s and three 2p orbitals gives four \(sp^3\) hybrids, each one part s and three parts p, so 25% s character. Their large lobes aim at a tetrahedron's four corners, 109.5° apart. In methane, carbon places one electron in each \(sp^3\) hybrid, and each overlaps a hydrogen 1s orbital end to end to make a σ bond. The four bonds are identical because the four hybrids are. Any atom with four electron groups is described as \(sp^3\), including the carbon atoms in ethane and the silicon in \(\mathrm{SiCl_4}\).
Lone pairs occupy hybrids too
Hybrid orbitals hold lone pairs as well as bonding pairs. Nitrogen in ammonia, \(\mathrm{NH_3}\), has four electron groups: three bonds and a lone pair. It is \(sp^3\), with three hybrids forming N–H σ bonds and the fourth holding the lone pair. Oxygen in water also has four groups, two bonds and two lone pairs, so it is \(sp^3\) as well. Lone pairs repel more strongly than bonding pairs and squeeze the bond angles: 109.5° in \(\mathrm{CH_4}\), about 107° in \(\mathrm{NH_3}\) and 104.5° in \(\mathrm{H_2O}\). The hybridisation follows the electron groups, not the molecular shape.
sp² hybrids: three groups
Mixing one s and two p orbitals gives three \(sp^2\) hybrids in a plane, 120° apart, with one p orbital left unhybridised, perpendicular to that plane. Boron trifluoride, \(\mathrm{BF_3}\), shows this: boron, 2s²2p¹, uses three \(sp^2\) hybrids, each with one electron, to form three B–F σ bonds in a trigonal planar molecule. Boron's leftover p orbital is empty, which is why \(\mathrm{BF_3}\) readily accepts a lone pair from a molecule such as ammonia. In carbon compounds, the unhybridised p orbital usually forms a π bond, as in ethene, \(\mathrm{C_2H_4}\), covered in the next topic.
sp hybrids: two groups
Mixing one s and one p orbital gives two \(sp\) hybrids pointing in opposite directions, 180° apart, with 50% s character. Two p orbitals remain unhybridised, at right angles to each other and to the line of the hybrids. Beryllium in a gaseous \(\mathrm{BeCl_2}\) molecule is \(sp\): each hybrid overlaps a chlorine 3p orbital, giving a linear Cl–Be–Cl molecule. The two spare p orbitals on an \(sp\) atom can form two π bonds, which is how carbon makes the triple bond in ethyne and the two double bonds in \(\mathrm{CO_2}\).
Five and six groups
Atoms from period 3 onwards can have five or six electron groups. The traditional valence bond description mixes in d orbitals: \(sp^3d\) (one s, three p, one d) gives five hybrids pointing to the corners of a trigonal bipyramid, as in \(\mathrm{PCl_5}\), and \(sp^3d^2\) gives six hybrids pointing to the corners of an octahedron, as in \(\mathrm{SF_6}\). Treat these two labels as bookkeeping that matches the geometry. Modern calculations show that d orbitals contribute very little to bonding in such molecules; the bonding is better described by molecular orbital theory, with some ionic character.
Assigning hybridisation step by step
1. Draw the Lewis structure. 2. Count the electron groups around the atom: each bonded atom counts as one group whether the bond is single, double or triple, and each lone pair counts as one. A single unpaired electron also counts as one. 3. Match the count: 2 groups gives \(sp\) (linear), 3 gives \(sp^2\) (trigonal planar), 4 gives \(sp^3\) (tetrahedral), 5 gives \(sp^3d\) (trigonal bipyramidal) and 6 gives \(sp^3d^2\) (octahedral). The hybridisation always matches the electron-group geometry from VSEPR, and the number of hybrids equals the number of groups.
Worked example: phosphorus in PCl₃ and PCl₅
Find the hybridisation of phosphorus in each chloride. 1. In \(\mathrm{PCl_3}\), phosphorus has 5 valence electrons: three form P–Cl bonds and two form a lone pair. 2. That is 3 bonds + 1 lone pair = 4 groups, so phosphorus is \(sp^3\), and the molecule is trigonal pyramidal. 3. In \(\mathrm{PCl_5}\), all 5 valence electrons form P–Cl bonds and there are no lone pairs: 5 groups. 4. Phosphorus is \(sp^3d\), and the molecule is trigonal bipyramidal. 5. Check: the number of hybrids, 4 and then 5, equals the number of groups in each molecule.
Worked example: xenon tetrafluoride
What is the hybridisation of xenon in \(\mathrm{XeF_4}\), and what is its shape? 1. Xenon has 8 valence electrons; four go into Xe–F bonds, leaving 4 electrons, or 2 lone pairs. 2. Groups: 4 bonds + 2 lone pairs = 6. 3. Six groups give an octahedral electron-group geometry, so xenon is described as \(sp^3d^2\). 4. The two lone pairs sit opposite each other, as far apart as possible, so the four fluorine atoms form a square around xenon: the molecule is square planar. 5. Check: the shape is not octahedral, but the hybridisation still follows all six groups.
Common mistakes to avoid
First, counting only bonded atoms and ignoring lone pairs: ammonia is \(sp^3\), not \(sp^2\). Second, counting a double or triple bond as two or three groups; it is one. Third, choosing hybridisation from the molecular shape instead of the electron-group geometry: linear \(\mathrm{XeF_2}\) has five groups and is \(sp^3d\), not \(sp\). Fourth, mixing up the counts: \(sp^2\) uses three orbitals and makes three hybrids. Fifth, thinking hybrids combine orbitals from two different atoms; they mix orbitals on one atom.
Key takeaways
Hybrid orbitals mix atomic orbitals on one atom into an equal number of equivalent hybrids that point where the electron groups are. Count the groups from the Lewis structure, with lone pairs counted and multiple bonds counted once: 2 is \(sp\) at 180°, 3 is \(sp^2\) at 120°, 4 is \(sp^3\) at 109.5°, 5 is \(sp^3d\) and 6 is \(sp^3d^2\). Hybrids hold σ bonds and lone pairs; unhybridised p orbitals on \(sp^2\) and \(sp\) atoms are left for π bonds. The d-orbital labels are a convention, not a measured fact.
Flashcards
Flashcard
Mixing atomic orbitals on one atom to form a new set of equivalent hybrid orbitals
Test your understanding
Question 1 of 5
What is the hybridisation of nitrogen in nitrogen trifluoride, NF₃, which has three N–F bonds and one lone pair on nitrogen?
Question 2 of 5
Xenon difluoride, XeF₂, is a linear molecule with two Xe–F bonds and three lone pairs on xenon. What is the hybridisation of xenon?
Question 3 of 5
How many hybrid orbitals form when one s orbital mixes with two p orbitals?
Question 4 of 5
What is the angle between two sp² hybrid orbitals on the same atom?
Question 5 of 5
Which statement about hybrid orbitals is correct?
