Chemistry › Section H · Advanced theories of covalent bonding › Topic H.1
Valence bond theory
Lewis structures tell you which atoms share electrons, and VSEPR predicts the shape, but neither says what a shared pair actually is. Valence bond theory answers that with orbitals: a covalent bond forms where orbitals from two atoms overlap and share a pair of electrons.
From dots to orbitals
A Lewis structure draws a bond as a line, and VSEPR theory turns electron groups into a three-dimensional shape. Neither explains why a shared pair holds two atoms together, or why some bonds are stronger than others. Quantum theory describes electrons in atoms as orbitals: spherical s orbitals, dumbbell-shaped p orbitals and so on. Valence bond theory builds molecules from those atomic orbitals, keeping the familiar idea of a localised bond between two atoms and giving it a physical picture.
Bonds as overlapping orbitals
Valence bond theory says that a covalent bond needs two things. First, the two atoms must each supply an orbital, and these must overlap: part of each occupies the same region of space. Second, the two orbitals together hold exactly two electrons with opposite spins, usually one from each atom. The shared pair sits between the nuclei and is attracted to both, and that attraction binds the atoms. In \(\mathrm{H_2}\), each hydrogen atom brings a half-filled 1s orbital, and the two 1s orbitals overlap to hold the pair. The greater the overlap, the stronger the bond.
Energy and distance
Picture two hydrogen atoms approaching from far apart, where their energy is set at zero. As the orbitals begin to overlap, each electron feels the pull of both nuclei and the energy falls. Repulsions grow too, between the two electrons and between the two nuclei. At one distance the balance gives the lowest possible energy: this is the bond length, about 74 pm for \(\mathrm{H_2}\). Push the nuclei closer and their repulsion takes over, so the energy climbs steeply. The depth of the energy minimum is the bond energy, about 436 kJ mol⁻¹ for H–H: the energy released when the bond forms, and needed to break it.
Worked example: the energy of one bond
The Cl–Cl bond energy is 243 kJ mol⁻¹. How much energy breaks one Cl–Cl bond, and what wavelength of light carries that much energy per photon? 1. Convert to joules per mole: \(243 \text{ kJ mol}^{-1} = 2.43 \times 10^5 \text{ J mol}^{-1}\). 2. Divide by Avogadro's number: \(\frac{2.43 \times 10^5}{6.022 \times 10^{23}} = 4.04 \times 10^{-19}\) J per bond. 3. Use \(E = \frac{hc}{\lambda}\), so \(\lambda = \frac{(6.626 \times 10^{-34})(2.998 \times 10^8)}{4.04 \times 10^{-19}} = 4.92 \times 10^{-7}\) m, or 492 nm. 4. Interpret: blue, violet and ultraviolet photons carry enough energy to split chlorine molecules into atoms. 5. Check: \(2.4 \times 10^5 \div (6 \times 10^{23}) \approx 4 \times 10^{-19}\) J, and 492 nm lies in the visible range.
Direction matters
How much two orbitals overlap depends on their orientation as well as their distance. An s orbital is spherical, so it overlaps equally well from any direction. A p orbital points along one axis, so it overlaps strongly only when it points at the other atom. Two p orbitals meeting end to end along the line between the nuclei overlap far more than two meeting at an angle. So valence bond theory links bonding to geometry: atoms bond in the directions their orbitals point.
Sigma bonds
A sigma (σ) bond is a covalent bond whose electron density is concentrated on the internuclear axis, the line through the two nuclei. It forms from end-to-end overlap: two 1s orbitals in \(\mathrm{H_2}\); hydrogen's 1s with a fluorine 2p in HF; or two 2p orbitals pointing at each other in \(\mathrm{F_2}\). A σ bond looks the same from every angle around the axis, so turning one atom about the bond does not change the overlap. Every single bond in a Lewis structure is a σ bond.
Pi bonds
A pi (π) bond forms when two parallel p orbitals overlap side by side. The overlap lies in two regions, one above and one below the internuclear axis, and the axis itself sits in a nodal plane where the electron density is zero. Between any two atoms, the first bond is always a σ bond, and there can be only one. Any further bonds are π bonds. So a double bond is one σ bond plus one π bond, and a triple bond is one σ bond plus two π bonds, at right angles to each other. In \(\mathrm{N_2}\), the triple bond is one σ and two π.
Why π bonds are weaker
Side-by-side overlap is less effective than end-to-end overlap, so a π bond is generally weaker than a σ bond joining the same pair of atoms. Carbon shows the pattern clearly. A C–C single bond is about 348 kJ mol⁻¹ and a C=C double bond about 614 kJ mol⁻¹, so the π bond adds roughly 266 kJ mol⁻¹. A C≡C triple bond is about 839 kJ mol⁻¹, so the second π bond adds about 225 kJ mol⁻¹. A double bond is stronger than a single bond, but less than twice as strong. All three figures are averages over many molecules.
Worked example: counting σ and π bonds
Propyne, \(\mathrm{CH_3{-}C{\equiv}CH}\), is a fuel gas used in some welding torches. How many σ and π bonds does it contain? 1. List the bonds from the Lewis structure: three C–H bonds on the \(\mathrm{CH_3}\) carbon, one C–C single bond, one C≡C triple bond and one C–H bond on the end carbon. 2. Every single bond is one σ bond: 3 + 1 + 1 = 5 σ. 3. The triple bond is one σ and two π: add 1 σ and 2 π. 4. Total: 6 σ and 2 π. 5. Check: the molecule has 8 shared pairs (16 bonding electrons), and 6 + 2 = 8 bonds, one per pair.
Where simple overlap works, and where it fails
Sulfur in \(\mathrm{H_2S}\) has two half-filled 3p orbitals at right angles. If each overlaps a hydrogen 1s orbital, the H–S–H angle should be 90°, and the measured angle, about 92°, is close. But water, with oxygen's two half-filled 2p orbitals, has an angle of 104.5°, not 90°. Methane is worse: carbon, 1s²2s²2p², has only two unpaired electrons, yet it forms four identical C–H bonds at 109.5°. Plain atomic orbitals cannot explain these, and the next topic fixes the model with hybrid orbitals.
Common mistakes to avoid
First, counting a double bond as two σ bonds: only one σ bond can join two atoms, so the second bond is π. Second, counting a triple bond as three π bonds; it is one σ and two π. Third, thinking a π bond has electron density on the axis; its axis lies in a nodal plane. Fourth, assuming a double bond is exactly twice as strong as a single bond. Fifth, forgetting to divide by Avogadro's number when converting a molar bond energy to the energy of one bond, or forgetting the kilojoules.
Key takeaways
In valence bond theory, a covalent bond forms when orbitals on two atoms overlap and share a pair of electrons with opposite spins. The bond length is the distance of lowest energy, where attractions and repulsions balance, and the bond energy is the depth of that minimum. More overlap gives a stronger bond. End-to-end overlap gives a σ bond, with density on the axis; side-by-side overlap of parallel p orbitals gives a weaker π bond, with a node on the axis. Single bonds are σ; double bonds are σ + π; triple bonds are σ + 2π.
Flashcards
Flashcard
A covalent bond forms when orbitals on two atoms overlap and share an electron pair
Test your understanding
Question 1 of 5
Which kind of orbital overlap produces a π bond?
Question 2 of 5
How many σ and π bonds are in acetonitrile, CH₃C≡N?
Question 3 of 5
The H–Br bond energy is 366 kJ mol⁻¹. What energy is needed to break a single H–Br bond?
Question 4 of 5
In the energy curve for two approaching hydrogen atoms, what is true at the bond length?
Question 5 of 5
Why is a π bond generally weaker than a σ bond between the same two atoms?
