Chemistry › Section J · Liquids and solids › Topic J.2
Properties of liquids
Why does honey pour slowly, why can an insect stand on a pond, and why does water creep up a paper towel? Each answer comes back to the intermolecular forces between the molecules of the liquid.
What makes a liquid a liquid
In a liquid the molecules are almost as close together as in a solid, but they are not locked in place: they constantly jostle and slide past one another. That is why a liquid has a fixed volume, is very hard to compress, and still takes the shape of its container. How easily the molecules slide, and how strongly they cling together, depends on the intermolecular forces from the previous topic: dispersion forces, dipole-dipole attractions and hydrogen bonds. Three everyday properties follow from those forces: viscosity, surface tension and capillary action.
Viscosity: resistance to flow
Viscosity measures how strongly a liquid resists flowing. Its SI unit is the pascal second, Pa s; everyday liquids are often quoted in millipascal seconds, mPa s. At 25 °C water has a viscosity of about 0.89 mPa s, while engine oil and syrups are hundreds or thousands of times higher. Two things raise viscosity. Stronger intermolecular forces hold molecules back as they try to slide past each other. Long, flexible molecules tangle with one another, which is why heavy oils made of long hydrocarbon chains flow slowly even though they have no hydrogen bonds.
Viscosity and temperature
Heating a liquid gives its molecules more kinetic energy, so more of them have enough energy to break free from their neighbours and move on. Viscosity therefore falls, often steeply, as temperature rises. Water's viscosity is about 1.79 mPa s at 0 °C but only about 0.28 mPa s at 100 °C, more than six times lower. You see this when warmed honey or syrup pours easily, and it is why motor oils carry ratings for both cold and hot conditions: an oil must flow when the engine starts on a winter morning and still protect moving parts once the engine is hot.
Worked example: ranking viscosity
Rank hexane, \(\mathrm{C_6H_{14}}\), water and glycerol, \(\mathrm{C_3H_5(OH)_3}\), from least to most viscous at 25 °C. 1. Hexane is nonpolar, so it has dispersion forces only, and its short chain hardly tangles. 2. Water forms hydrogen bonds, which hold molecules back much more. 3. Glycerol has three O–H groups on every molecule, so each one can form several hydrogen bonds at once, and it is also larger than water. 4. Order: hexane < water < glycerol. 5. Check with measured values: about 0.30 mPa s, 0.89 mPa s and roughly 940 mPa s. Glycerol is about a thousand times more viscous than water.
Surface tension
A molecule deep inside a liquid is pulled equally in all directions by its neighbours. A molecule at the surface has neighbours only beside and below it, so it feels a net pull inward. The liquid therefore behaves as though its surface were a stretched skin, and it tends to minimise its surface area, which is why small drops are nearly spherical. Surface tension is the energy needed to increase the surface area by one unit, in J m⁻², which is the same as N m⁻¹. Water's value at 25 °C is about 0.0720 N m⁻¹, high because of hydrogen bonding; ethanol's is about 0.022 N m⁻¹. Like viscosity, surface tension falls as temperature rises.
Cohesion, adhesion and the meniscus
Cohesive forces are attractions between molecules of the same substance; adhesive forces are attractions between a liquid and a different material, such as a container wall. Their balance decides the shape of the surface in a narrow tube, the meniscus. Water is attracted strongly to glass, whose surface carries polar O–H groups, so adhesion beats cohesion: water climbs the walls and forms a concave meniscus, curving downward in the middle. Mercury's atoms attract each other far more strongly than they attract glass, so it pulls away from the walls and forms a convex meniscus, bulging upward. Read a water volume at the bottom of the meniscus.
Capillary action
Capillary action is the movement of a liquid along a narrow space driven by adhesion and surface tension. In a thin glass tube, water's adhesion pulls the edges upward and surface tension drags the rest of the column after them, until the weight of the raised water balances the upward pull. The height reached is
where T is the surface tension, θ the contact angle between liquid and wall, r the tube's radius, ρ the liquid's density and g = 9.81 m s⁻². Narrower tubes give higher rises, because h is inversely proportional to r. Capillary action draws water into paper towels and through soil, and it draws molten wax up a candle wick.
Worked example: capillary rise
How high does water at 25 °C rise in a clean glass tube of radius 0.100 mm? Take T = 0.0720 N m⁻¹, ρ = 997 kg m⁻³ and a contact angle of 0°, so cos θ = 1. 1. Convert the radius: \(r = 1.00 \times 10^{-4}\) m. 2. Substitute: \(h = \frac{2(0.0720)(1)}{(1.00 \times 10^{-4})(997)(9.81)}\). 3. Evaluate: h = 0.147 m, or 14.7 cm. 4. Check the units: N m⁻¹ divided by m × kg m⁻³ × m s⁻² leaves metres, because 1 N = 1 kg m s⁻². 5. Compare: ethanol, with T = 0.0220 N m⁻¹ and ρ = 785 kg m⁻³, rises only 5.71 cm in the same tube, because its weaker intermolecular forces give a lower surface tension.
Common mistakes to avoid
First, assuming heavier molecules are always more viscous; viscosity depends on intermolecular forces and tangling, and water, at 18 g mol⁻¹, is about three times as viscous as hexane, at 86 g mol⁻¹. Second, forgetting that both viscosity and surface tension fall as temperature rises. Third, putting the tube's diameter into the capillary formula instead of its radius, which halves the answer. Fourth, leaving the radius in millimetres or the density in g cm⁻³; convert to metres and kg m⁻³ first. Fifth, mixing up the two forces: cohesion is like-to-like, adhesion is liquid-to-wall.
Key takeaways
Liquids have a fixed volume but no fixed shape, and their properties come from intermolecular forces. Viscosity is resistance to flow, measured in Pa s; it rises with stronger forces and longer, tangling molecules, and falls with temperature. Surface tension, in N m⁻¹ or J m⁻², is the energy needed to enlarge a surface; it makes drops round and is high for water because of hydrogen bonding. When adhesion beats cohesion the meniscus is concave and the liquid rises in a capillary tube to \(h = \frac{2T\cos\theta}{r\rho g}\); when cohesion wins, as for mercury, it is convex and the liquid is pushed down.
Flashcards
Flashcard
Fixed volume, no fixed shape; molecules close but able to slide
Test your understanding
Question 1 of 5
In a clean glass capillary tube, water rises 6.0 cm. How high does it rise in a tube with half the radius?
Question 2 of 5
Which liquid is the most viscous at 25 °C?
Question 3 of 5
Why does water in a glass tube form a concave meniscus?
Question 4 of 5
Water at 25 °C (T = 0.0720 N m⁻¹, ρ = 997 kg m⁻³, contact angle 0°) is in a glass tube of inner diameter 0.100 mm. How high does it rise? Use g = 9.81 m s⁻².
Question 5 of 5
A beaker of water is warmed from 20 °C to 60 °C. What happens to its viscosity and surface tension?
