Chemistry › Section J · Liquids and solids › Topic J.1
Intermolecular forces
The attractions between separate molecules are far weaker than the bonds inside them, yet they decide whether a substance is a gas, a liquid or a solid at room temperature, and why water boils at 100 °C instead of somewhere far below zero.
Inside molecules and between them
Covalent bonds hold the atoms of a molecule together; these are intramolecular forces. Intermolecular forces are the attractions between one molecule and its neighbours. When water boils, only the intermolecular forces are overcome: the steam is still made of intact H₂O molecules. The difference in strength is large. Boiling 1 mol of water takes about 41 kJ, while breaking the two O–H bonds in every molecule of that mole would take over 900 kJ. All intermolecular forces are electrostatic: partial positive charges on one molecule attract partial negative charges on another. The stronger they are, the more energy is needed to pull molecules apart, so melting and boiling points rise.
London dispersion forces
Every atom and molecule feels dispersion forces, even nonpolar ones such as \(\mathrm{Cl_2}\) or helium. The electrons are always moving, so at any instant the electron cloud may sit slightly more on one side, creating a temporary dipole. That dipole distorts the electron cloud of a neighbour, inducing a dipole that attracts it. How easily a cloud is distorted is its polarisability. Larger atoms and molecules, with more electrons held further from the nuclei, are more polarisable and feel stronger dispersion forces. The halogens show the trend clearly: F₂ boils at −188 °C, Cl₂ at −34 °C, Br₂ at 59 °C and I₂ at 184 °C, which is why iodine is a solid at room temperature.
Shape matters too
Dispersion forces act only where molecules touch, so shape changes their strength even when the formula is the same. Butane and its isomer 2-methylpropane are both \(\mathrm{C_4H_{10}}\), with identical molar masses and numbers of electrons. Butane is a zigzag chain whose molecules can lie alongside one another over their whole length. 2-Methylpropane is compact and nearly spherical, so neighbouring molecules touch over a much smaller area. As a result, butane boils at about −1 °C and 2-methylpropane at about −12 °C. Long, flat or chain-like molecules generally have stronger dispersion forces than compact, branched ones of the same size.
Dipole-dipole attractions
A polar molecule, as you saw in the topic on molecular polarity, has a permanent dipole: a partial positive end and a partial negative end. Polar molecules line up so that the positive end of one sits near the negative end of the next, adding dipole-dipole attraction on top of dispersion forces. Compare two molecules of almost the same size. Propane, \(\mathrm{C_3H_8}\) (44.10 g mol⁻¹), is essentially nonpolar and boils at −42 °C. Acetaldehyde, \(\mathrm{CH_3CHO}\) (44.05 g mol⁻¹), has a strongly polar C=O group and boils at 20 °C. When molecules are similar in size, the polar one usually has the higher boiling point.
Hydrogen bonding
A hydrogen bond is an especially strong dipole-dipole attraction. It forms when a hydrogen atom covalently bonded to N, O or F is attracted to a lone pair on an N, O or F atom of a neighbouring molecule. These three elements are small and very electronegative, so the hydrogen carries a large partial positive charge and can approach the lone pair closely. A hydrogen bond in water is worth roughly 20 kJ mol⁻¹, far weaker than an O–H covalent bond (about 460 kJ mol⁻¹) but stronger than typical dipole-dipole forces. A molecule can only hydrogen-bond to itself if it has both parts: an H on N, O or F, and a lone pair on N, O or F.
Worked example: the group 16 hydrides
The boiling points of H₂O, H₂S, H₂Se and H₂Te are about 100 °C, −60 °C, −41 °C and −2 °C. Explain the pattern. 1. All four are bent, polar molecules, so all have dispersion and dipole-dipole forces. 2. From H₂S to H₂Te the central atom grows and the electron count rises from 18 to 54, so dispersion forces increase and the boiling point climbs. 3. On that trend alone, H₂O, the smallest, should boil lowest, well below −60 °C. 4. Instead it boils highest, because only water has H bonded to O, so only water forms hydrogen bonds. 5. Check: the hydrides of groups 15 and 17 show the same jump at their first member, NH₃ and HF.
Worked example: ranking boiling points
Rank HCl, Cl₂ and HF from lowest to highest boiling point. 1. List the forces. Cl₂ is nonpolar: dispersion only. HCl is polar: dispersion and dipole-dipole. HF has H bonded to F: dispersion, dipole-dipole and hydrogen bonding. 2. Compare sizes. Cl₂ has 34 electrons, HCl 18 and HF 10, so dispersion is strongest in Cl₂. 3. Decide. HF's hydrogen bonds outweigh everything, so it boils highest. Cl₂'s much larger dispersion forces outweigh HCl's dipole. 4. Order: HCl (−85 °C) < Cl₂ (−34 °C) < HF (20 °C). 5. Check the lesson: a nonpolar molecule can out-boil a polar one if it is much larger. HCl, HBr and HI show the same thing, boiling at −85, −67 and −35 °C even though polarity falls down the group.
Water, ice and DNA
Hydrogen bonding gives water properties that life depends on. In ice, each molecule hydrogen-bonds to four neighbours in a rigid, open hexagonal framework with a lot of empty space. When ice melts, part of that framework collapses and the molecules pack more closely, so liquid water (about 1.00 g cm⁻³) is denser than ice (about 0.92 g cm⁻³). Ice therefore floats, and lakes freeze from the top down, insulating the water below. Hydrogen bonds also hold the two strands of DNA together: adenine pairs with thymine through two hydrogen bonds, and guanine with cytosine through three. They are strong enough to keep the helix stable but weak enough for enzymes to unzip it for copying.
Common mistakes to avoid
First, thinking boiling or melting breaks covalent bonds; for molecular substances it only overcomes intermolecular forces. Second, calling any molecule that contains hydrogen hydrogen-bonded: the H must be bonded to N, O or F, so CH₄ and HCl do not hydrogen-bond. Third, missing that both parts are needed: acetone, \(\mathrm{(CH_3)_2CO}\), has an oxygen with lone pairs but no O–H, so it cannot hydrogen-bond to itself. Fourth, forgetting that dispersion forces act in every molecule and often dominate, as Cl₂ versus HCl shows. Fifth, comparing molar masses without checking shape: isomers can differ by more than 10 °C.
Key takeaways
Intermolecular forces act between molecules and are much weaker than covalent bonds, but they set melting and boiling points. Dispersion forces exist in all molecules and grow with polarisability, which rises with size and surface contact. Polar molecules add dipole-dipole attractions. Hydrogen bonding, the strongest of the three, needs H bonded to N, O or F and a lone pair on N, O or F of a neighbour. To rank boiling points, list the forces in each substance, then weigh hydrogen bonding and size against each other. Hydrogen bonding explains water's high boiling point, floating ice and the pairing of DNA strands.
Flashcards
Flashcard
An attraction between separate molecules
Test your understanding
Question 1 of 5
Which of these substances forms hydrogen bonds between its own molecules?
Question 2 of 5
HCl, HBr and HI boil at −85, −67 and −35 °C, even though HCl is the most polar. What is the best explanation?
Question 3 of 5
Butane and 2-methylpropane are both C₄H₁₀. Why does butane boil about 11 °C higher?
Question 4 of 5
Which order of boiling points, lowest to highest, is correct?
Question 5 of 5
Liquid water is denser than ice. Why?
