Chemistry › Section N · Acid-base equilibria › Topic N.2
pH and pOH
Hydronium concentrations in everyday solutions range from about 1 M to below 10⁻¹³ M, far too wide for ordinary numbers to compare easily. The pH scale squeezes that range into a short line of simple values, and pOH does the same for hydroxide.
Concentrations across many powers of ten
The previous topic showed that every aqueous solution contains both hydronium and hydroxide ions, linked by \(K_w\). The trouble is the size of the numbers. Stomach acid holds roughly \(10^{-2}\) M of hydronium, pure water at 25 °C \(10^{-7}\) M and a drain cleaner about \(10^{-13}\) M. Writing and comparing values like these is clumsy, and a graph on an ordinary axis would squash all but the largest into zero. Chemists solve this with a logarithmic scale. Each power of ten becomes one step on the scale, so a range of thirteen powers of ten becomes about thirteen units.
The p-function and pH
The letter p in front of a quantity means "take the negative base-10 logarithm of it": \(\mathrm{p}X = -\log X\). Applied to hydronium concentration in mol/L, it defines pH:
The minus sign makes typical values positive, because concentrations below 1 M have negative logarithms. Going the other way,
so a pH of 4 means \(10^{-4}\) M of hydronium. Only the number goes into the logarithm, which is why pH has no unit. The same p-notation appears again for equilibrium constants, as in \(\mathrm{p}K_w\).
Reading a logarithmic scale
Because pH is a logarithm, a change of one pH unit is a tenfold change in hydronium concentration, and the lower the pH, the more hydronium there is. A solution at pH 3 has 10 times the hydronium of one at pH 4 and 1000 times that of one at pH 6. A drop from pH 8.2 to 8.1, which sounds tiny, is a rise of about 26% in hydronium, since \(10^{0.1} \approx 1.26\). The scale has no fixed ends: concentrated strong acids can have negative pH values, as 2.0 M HCl, at pH −0.30, does, and concentrated strong bases can go above 14.
pOH and the link to pH
Hydroxide gets the same treatment: \(\mathrm{pOH} = -\log[\mathrm{OH^-}]\), and \(\mathrm{[OH^-]} = 10^{-\mathrm{pOH}}\). The two scales are tied together by \(K_w\). Taking the negative logarithm of \(K_w = \mathrm{[H_3O^+][OH^-]}\) turns the product into a sum, because the log of a product is the sum of the logs:
At 25 °C, \(\mathrm{p}K_w = -\log(1.0 \times 10^{-14}) = 14.00\), so \(\mathrm{pH} + \mathrm{pOH} = 14.00\). Knowing any one of pH, pOH, \(\mathrm{[H_3O^+]}\) or \(\mathrm{[OH^-]}\) gives you the other three.
Acidic, neutral and basic
At 25 °C, a neutral solution has \(\mathrm{[H_3O^+] = [OH^-]} = 1.0 \times 10^{-7}\) M, so pH = pOH = 7.00. Acidic solutions have pH below 7.00, and basic solutions have pH above 7.00. These cut-offs belong to 25 °C only, because \(K_w\) changes with temperature. At 37 °C, \(K_w \approx 2.4 \times 10^{-14}\), so \(\mathrm{p}K_w \approx 13.62\) and neutral water has pH \(\approx 6.81\). Water at that pH and temperature is neutral, not acidic, because hydronium and hydroxide are still equal. Unless a temperature is given, take every pH in this course to be at 25 °C.
Significant figures in pH
In a logarithm, the digits before the decimal point only locate the power of ten; the digits after it carry the measured precision. So the rule is: the number of decimal places in a pH equals the number of significant figures in the concentration. A hydronium concentration of \(5.0 \times 10^{-3}\) M has two significant figures, so its pH is written 2.30, with two decimal places, not 2.3 or 2.301. The rule runs in reverse too: a pH of 7.40 has two decimal places, so the concentration it gives, \(4.0 \times 10^{-8}\) M, has two significant figures. The same rule applies to pOH.
Worked example: pH of a strong acid
Find the pH of 0.0025 M nitric acid, \(\mathrm{HNO_3}\), at 25 °C. 1. Nitric acid is a strong acid, so it ionises completely: \(\mathrm{HNO_3 + H_2O \rightarrow H_3O^+ + NO_3^-}\). 2. One mole of acid gives one mole of hydronium, so \(\mathrm{[H_3O^+]} = 0.0025\) M; the \(10^{-7}\) M from water is negligible. 3. \(\mathrm{pH} = -\log(0.0025) = 2.602\ldots\) 4. The concentration has two significant figures, so report two decimal places: pH = 2.60. 5. Check: 0.0025 M lies between \(10^{-3}\) and \(10^{-2}\) M, so the pH must lie between 2 and 3.
Worked example: pOH and pH of a strong base
Find the pOH and pH of 0.0150 M barium hydroxide, \(\mathrm{Ba(OH)_2}\), at 25 °C. 1. It is a soluble ionic hydroxide, so it dissociates completely:
2. Each formula unit gives two hydroxide ions: \(\mathrm{[OH^-]} = 2 \times 0.0150 = 0.0300\) M. 3. \(\mathrm{pOH} = -\log(0.0300) = 1.523\), three decimal places for three significant figures. 4. \(\mathrm{pH} = 14.00 - 1.523 = 12.48\), two decimal places because 14.00, from the two-figure \(K_w\), has only two. 5. Check: a fairly concentrated strong base should have a pH well above 7, and it does.
Worked example: from pH back to concentrations
Lemon juice has a pH of 2.30 at 25 °C. Find \(\mathrm{[H_3O^+]}\) and \(\mathrm{[OH^-]}\). 1. Undo the logarithm: \(\mathrm{[H_3O^+]} = 10^{-2.30} = 5.0 \times 10^{-3}\) M, two significant figures for the two decimal places. 2. Find pOH: \(14.00 - 2.30 = 11.70\). 3. Then \(\mathrm{[OH^-]} = 10^{-11.70} = 2.0 \times 10^{-12}\) M. 4. Check with \(K_w\): \((5.0 \times 10^{-3})(2.0 \times 10^{-12}) = 1.0 \times 10^{-14}\). On a calculator, \(10^{-x}\) is usually the second function of the log key.
Measuring pH, and some everyday values
A pH meter measures pH directly with a glass electrode whose voltage depends on hydronium concentration; it must be calibrated against buffer solutions of known pH, and good meters read to 0.01 pH unit. For a quick estimate, indicator dyes change colour with pH: universal indicator and pH paper contain a mixture of dyes and show a different colour for each region of the scale, while litmus simply turns red in acid and blue in base. Some approximate values at 25 °C: stomach contents 1 to 3, lemon juice about 2, black coffee about 5, pure water 7, human blood 7.35 to 7.45, seawater about 8.1, household ammonia about 11 to 12.
Common mistakes to avoid
First, calling a solution with lower pH less acidic: lower pH means more hydronium. Second, treating the scale as linear, so that pH 3 seems twice as acidic as pH 6, when it has 1000 times the hydronium. Third, forgetting that \(\mathrm{Ba(OH)_2}\) and \(\mathrm{Ca(OH)_2}\) give two hydroxide ions per formula unit. Fourth, reporting the pOH of a base as its pH. Fifth, keeping the wrong number of figures: decimal places in pH match significant figures in concentration. Sixth, using pH + pOH = 14.00 or neutral pH 7 at temperatures other than 25 °C.
Key takeaways
pH = −log[H₃O⁺] and pOH = −log[OH⁻]; to go back, [H₃O⁺] = 10⁻ᵖᴴ. One pH unit is a tenfold change, and lower pH means more acidic. At 25 °C, pH + pOH = 14.00, neutral is pH 7.00, acidic is below 7 and basic is above 7; at other temperatures pKw, and so neutral pH, shift. Strong acids and bases ionise completely, so their concentrations give [H₃O⁺] or [OH⁻] directly, allowing for the number of ions per formula unit. Decimal places in pH equal significant figures in the concentration.
Flashcards
Flashcard
pX = −log X
Test your understanding
Question 1 of 5
What is the pH of a solution with [H₃O⁺] = 6.3 × 10⁻⁵ M at 25 °C?
Question 2 of 5
What is the pH of 0.0040 M potassium hydroxide, KOH, at 25 °C?
Question 3 of 5
A household cleaner has pH 11.20 at 25 °C. What is its hydroxide ion concentration?
Question 4 of 5
A solution has [H₃O⁺] = 3.2 × 10⁻⁴ M. How should its pH be reported?
Question 5 of 5
Solution X has pH 3.0 and solution Y has pH 6.0. How do their hydronium concentrations compare?
