Chemistry › Section N · Acid-base equilibria › Topic N.3
Relative strengths of acids and bases
At 0.10 M, hydrochloric acid and vinegar's acetic acid differ in pH by nearly two units. Ionisation constants put a number on that difference, explain it through molecular structure, and let you calculate the pH of any weak acid or base.
What strength means
How strong an acid or base is depends on how far it ionises in water. A strong acid transfers essentially all of its protons to water; the common ones are HCl, HBr, HI, \(\mathrm{HNO_3}\), \(\mathrm{HClO_4}\) and the first proton of \(\mathrm{H_2SO_4}\). The strong bases are the hydroxides of group 1 metals and of calcium, strontium and barium. Almost every other acid or base is weak and ionises only partly, reaching an equilibrium. Strength is not concentration: a dilute solution of a strong acid is still fully ionised, and a concentrated weak acid still ionises only slightly.
The acid ionisation constant, Ka
For a weak acid HA, the equilibrium \(\mathrm{HA + H_2O \rightleftharpoons H_3O^+ + A^-}\) has the acid ionisation constant
Water, the solvent, is left out, as in \(K_w\). The larger \(K_a\), the further the equilibrium lies to the right and the stronger the acid. As with pH, \(\mathrm{p}K_a = -\log K_a\), so a smaller \(\mathrm{p}K_a\) means a stronger acid. Two values used throughout this section, both at 25 °C: acetic acid, \(K_a = 1.8 \times 10^{-5}\) (\(\mathrm{p}K_a\) 4.74), and hydrofluoric acid, \(K_a \approx 6.8 \times 10^{-4}\) (\(\mathrm{p}K_a\) 3.17). HF is the stronger of the two.
The base ionisation constant, Kb
A weak base B takes protons from water, \(\mathrm{B + H_2O \rightleftharpoons BH^+ + OH^-}\), with the base ionisation constant
Again, a larger \(K_b\) or a smaller \(\mathrm{p}K_b\) means a stronger base. Ammonia, the standard example, has \(K_b = 1.8 \times 10^{-5}\) at 25 °C, by coincidence almost the same number as acetic acid's \(K_a\). Many weak bases are relatives of ammonia called amines, in which carbon groups replace one or more of its hydrogens; the lone pair on nitrogen accepts the proton in each case.
Conjugate pairs: Ka × Kb = Kw
Write the acid ionisation of HA and the base ionisation of its conjugate base, \(\mathrm{A^- + H_2O \rightleftharpoons HA + OH^-}\), and add them. Everything cancels except \(\mathrm{2H_2O \rightleftharpoons H_3O^+ + OH^-}\). Adding reactions multiplies their constants, so for any conjugate pair
or \(\mathrm{p}K_a + \mathrm{p}K_b = 14.00\) at 25 °C. The stronger an acid, the weaker its conjugate base. For ammonium, \(K_a = \frac{1.0 \times 10^{-14}}{1.8 \times 10^{-5}} = 5.6 \times 10^{-10}\). For fluoride, \(K_b = 1.5 \times 10^{-11}\). The conjugate bases of strong acids, such as \(\mathrm{Cl^-}\), have negligible base strength.
The levelling effect
Perchloric acid is intrinsically stronger than nitric acid, yet 0.10 M solutions of the two have the same pH. Each gives all its protons to water, so the only acid left in either solution is \(\mathrm{H_3O^+}\). Hydronium is therefore the strongest acid that can exist in water, and every stronger acid is levelled down to it. In the same way, hydroxide is the strongest base that can exist in water. To rank the strong acids, chemists dissolve them in a solvent that accepts protons less readily than water, such as pure acetic acid; there they ionise only partly, and their differences show up.
Percent ionisation
Another measure of strength is the percentage of acid molecules that ionise:
Unlike \(K_a\), it depends on concentration. The electrolytes topic found 1.3% for 0.10 M acetic acid; at 0.010 M the figure rises to about 4.2%. Diluting a weak acid lowers its hydronium concentration but raises the fraction ionised, because spreading the ions out makes them less likely to meet and recombine. For a weak base the same formula uses \(\mathrm{[OH^-]}\) and the base's initial concentration.
Solving for the pH of a weak acid
The equilibrium topics introduced ICE tables: rows for the Initial concentrations, the Change, and the Equilibrium values. For an acid of initial concentration C, let x mol/L ionise, giving \(\mathrm{[H_3O^+] = [A^-]} = x\) and \(\mathrm{[HA]} = C - x\), so \(K_a = \frac{x^2}{C - x}\). The \(10^{-7}\) M of hydronium from water is negligible here. When the acid is weak, x is small and \(C - x \approx C\), giving \(x \approx \sqrt{K_a C}\). Always test the result: if x is under 5% of C, keep it; if not, solve the full quadratic equation instead.
Worked example: the pH of dilute ammonia
Find the pH of 0.15 M ammonia, \(K_b = 1.8 \times 10^{-5}\), at 25 °C. 1. ICE: \(\mathrm{[NH_3]} = 0.15 - x\) and \(\mathrm{[NH_4^+] = [OH^-]} = x\). 2. \(K_b = \frac{x^2}{0.15 - x} \approx \frac{x^2}{0.15}\), so \(x = \sqrt{1.8 \times 10^{-5} \times 0.15} = 1.6 \times 10^{-3}\) M. 3. Test: \(\frac{0.0016}{0.15} = 1.1\%\), under 5%, so the approximation stands. 4. \(\mathrm{pOH} = -\log(1.64 \times 10^{-3}) = 2.78\), so pH = 14.00 − 2.78 = 11.22. 5. Check: basic, as it should be, but far below the pH 13.18 that 0.15 M NaOH would give.
Worked example: when the shortcut fails
Find the pH of 0.20 M hydrofluoric acid, \(K_a = 6.8 \times 10^{-4}\). 1. Shortcut: \(x \approx \sqrt{6.8 \times 10^{-4} \times 0.20} = 0.0117\) M. 2. Test: \(\frac{0.0117}{0.20} = 5.8\%\), over 5%, so the shortcut is not good enough. 3. Full equation: \(x^2 = 6.8 \times 10^{-4}(0.20 - x)\), or \(x^2 + 6.8 \times 10^{-4}x - 1.36 \times 10^{-4} = 0\). 4. Quadratic formula, keeping the positive root: \(x = 0.0113\) M. 5. pH = −log(0.0113) = 1.95, with 5.7% ionised. 6. Check: \(\frac{(0.0113)^2}{0.1887} = 6.8 \times 10^{-4}\), matching \(K_a\).
Structure and strength
For binary acids, H–A, two effects compete. Down a group, the H–A bond gets longer and weaker, so acidity rises: HF < HCl < HBr < HI. Across a period, the atom A becomes more electronegative, the bond more polar, and acidity rises: \(\mathrm{CH_4 < NH_3 < H_2O < HF}\). For oxyacids, the proton sits on an O–H group bonded to a central atom. A more electronegative central atom, or one with more oxygen atoms and a higher oxidation number, pulls electron density from the O–H bond and makes the acid stronger:
and \(\mathrm{HNO_2}\) is weaker than \(\mathrm{HNO_3}\).
Common mistakes to avoid
First, confusing strength with concentration. Second, treating a weak acid as fully ionised, so that 0.20 M acetic acid gets pH 0.70 instead of 2.72. Third, forgetting the square root in \(x \approx \sqrt{K_a C}\). Fourth, skipping the 5% test. Fifth, reporting pOH as the pH of a weak base. Sixth, thinking a weak acid has a strong conjugate base: acetate is a weak base too, with \(K_b = 5.6 \times 10^{-10}\); only the conjugates of extremely weak acids are strong. Seventh, expecting percent ionisation to stay fixed on dilution.
Key takeaways
Strength is the extent of ionisation: strong acids and bases ionise fully, weak ones reach an equilibrium measured by Ka or Kb, and larger constants or smaller pKa values mean stronger. For a conjugate pair, Ka × Kb = Kw, so a stronger acid has a weaker conjugate base. Water levels every strong acid to H₃O⁺. Percent ionisation rises on dilution. For a weak acid, x ≈ √(KaC) when x is under 5% of C, and the quadratic otherwise. Weaker, more polar H–A bonds and electron-pulling central atoms make stronger acids.
Flashcards
Flashcard
How far an acid ionises in water
Test your understanding
Question 1 of 5
Ammonia has Kb = 1.8 × 10⁻⁵ at 25 °C. What is Ka for the ammonium ion, NH₄⁺?
Question 2 of 5
What is the pH of 0.20 M acetic acid (Ka = 1.8 × 10⁻⁵) at 25 °C?
Question 3 of 5
Which of these is the strongest acid?
Question 4 of 5
A weak acid solution is diluted from 0.10 M to 0.010 M. What happens to its percent ionisation?
Question 5 of 5
Why do 0.10 M HClO₄ and 0.10 M HNO₃ have the same pH?
