Chemistry › Section A · Essential ideas › Topic A.3
Physical and chemical properties
How do you tell real gold from fool's gold, or know whether cooking an egg made something new? Chemists answer with properties: some you can observe while the substance stays itself, and some show up only when it turns into something else.
Telling substances apart
A property is any characteristic that helps identify a substance or tell it apart from others. Pyrite, a mineral nicknamed fool's gold, looks very like gold, and prospectors were sometimes fooled. Its properties give it away. Gold is soft enough to dent and can be hammered into thin sheets, while pyrite is hard and shatters; gold is about four times as dense; and gold does not tarnish, while pyrite slowly breaks down in damp air. Chemists sort properties in two ways: physical or chemical, and extensive or intensive.
Physical properties
A physical property can be observed or measured without changing the substance into a different one. Colour, smell, hardness, density, melting point, boiling point, electrical conductivity and solubility in water are all physical properties. Some can be seen just by looking, like the yellow colour of sulfur. Others can only be measured while the substance changes state: to find the melting point of a wax you have to melt it, but liquid wax is still wax, so its identity has not changed. Physical properties are the first things a chemist checks when identifying an unknown sample.
Physical changes
A physical change alters the form or state of a substance without making a new substance. Changes of state are the main examples: melting (solid to liquid), freezing, boiling or evaporation (liquid to gas), condensation (gas to liquid), and sublimation, in which a solid becomes a gas directly, as dry ice (solid carbon dioxide) does. Dissolving sugar in tea, crushing a can, grinding pepper and magnetising a needle are physical changes too. Many physical changes are easy to reverse, but reversibility is not the test: shredded paper cannot be put back together, yet it is still paper. The test is whether the substances present are the same before and after.
Chemical properties
A chemical property describes how a substance can change into different substances, or how it resists doing so. Flammability is one: petrol (gasoline) burns readily, while water does not burn at all. Others include reacting with oxygen, as iron does when it rusts in moist air while gold stays bright; reacting with water, as sodium does violently; reacting with acids, as chalk does when it fizzes; and breaking down when heated. You can only observe a chemical property by attempting a chemical change, so if the change happens, at least part of the original sample is gone.
Chemical changes and their clues
A chemical change, or chemical reaction, produces one or more new substances with different properties. Burning wood, rusting iron, cooking an egg, souring milk and digesting food are all chemical changes. Common clues include a gas forming without heating, a lasting colour change, a solid appearing when two liquids are mixed, light being given out, a new smell, and heat released or absorbed. Clues are evidence, not proof. Boiling water forms bubbles, and mixing paints changes colour, yet both are physical. The deciding question is always: is there a substance present afterwards that was not there before?
Worked example: physical or chemical?
A lit candle shows several changes at once. 1. Solid wax near the flame turns to a pool of liquid wax. It is still wax, so this is physical. 2. Liquid wax rises up the wick and becomes a gas. Still wax: physical. 3. The wax vapour combines with oxygen from the air to form carbon dioxide and water vapour, with light and heat. New substances form, so this is chemical. 4. Check: the candle gets shorter because its wax leaves as gases, not because matter is destroyed. 5. Compare two bubbling liquids: boiling water gives bubbles of water vapour (physical), while an antacid tablet in cold water gives bubbles of carbon dioxide, a new substance (chemical).
Extensive and intensive properties
An extensive property depends on how much matter you have: mass, volume, length and total energy content all double when the sample doubles. An intensive property is independent of sample size: temperature, density, melting point, boiling point and colour are the same for a drop as for a lake. A full bath and a cup of water, both at 40 °C, share one temperature, yet the bath holds far more thermal energy, which is why it stays warm much longer. Dividing one extensive property by another gives an intensive one. Density, which is mass divided by volume, is the most useful example; the next topic treats it fully.
Worked example: identifying a metal
Two pieces of a silvery metal are tested. Piece A: mass 5.40 g, volume 2.00 cm³. Piece B: mass 27.0 g, volume 10.0 cm³. Both melt at about 660 °C. Are they the same metal, and which one? 1. Mass and volume are extensive, so their difference only shows that B is larger. 2. Densities: A is \(5.40 \div 2.00 = 2.70\) g/cm³ and B is \(27.0 \div 10.0 = 2.70\) g/cm³. 3. Density and melting point are intensive and identical, so the pieces are almost certainly the same metal. 4. A density of 2.70 g/cm³ with a melting point near 660 °C matches aluminium. 5. Check: iron, another silvery metal, is about 7.9 g/cm³, nearly three times as dense.
Metals, nonmetals and metalloids
Shared properties let chemists group the elements. Metals, such as copper, iron and aluminium, are lustrous, good conductors of heat and electricity, and malleable (they can be hammered into sheets) and ductile (they can be drawn into wire). Nonmetals, such as sulfur, phosphorus and oxygen, conduct poorly, and the solid ones are usually dull and brittle. Metalloids, such as silicon and boron, have properties in between; silicon conducts electricity moderately, which makes it the basis of computer chips. The periodic table, met properly in a later topic, places elements with similar properties near one another.
Properties on a warning label
Properties matter for safety. Many chemical containers in the United States carry the NFPA 704 hazard diamond, set by the National Fire Protection Association. It has four coloured squares, each rated from 0 (minimal hazard) to 4 (severe). Blue, on the left, rates the health hazard. Red, at the top, rates flammability, which depends on how easily the substance catches fire. Yellow, on the right, rates instability: how readily it reacts violently or explodes. White, at the bottom, holds special symbols: a W crossed by a line warns that it reacts dangerously with water, OX marks an oxidiser, and SA a gas that can suffocate. A red 4 means the substance ignites very easily.
Common mistakes to avoid
First, treating every change that is hard to reverse as chemical: tearing or crushing is still physical. Second, treating every bubble or colour change as proof of a reaction: boiling makes bubbles and mixing paints changes colour without new substances. Third, calling a melting point a chemical property because the sample melts: melting does not change the substance. Fourth, mixing up the two sortings: physical or chemical is about whether identity changes, extensive or intensive is about whether the amount matters. Fifth, thinking a bigger sample is denser: density is intensive.
Key takeaways
Physical properties, such as colour, density and melting point, are observed without changing a substance's identity, and physical changes, including changes of state, make no new substances. Chemical properties, such as flammability, describe how a substance can turn into others; chemical changes produce new substances, and clues such as gas or colour change are evidence, not proof. Extensive properties scale with sample size; intensive ones, such as density and temperature, do not, so they help identify substances. Elements group into metals, nonmetals and metalloids.
Flashcards
Flashcard
A characteristic that helps identify a substance
Test your understanding
Question 1 of 5
Which of these describes a chemical property?
Question 2 of 5
Which of these is a chemical change?
Question 3 of 5
Which property is intensive?
Question 4 of 5
Sample X has a mass of 8.10 g and a volume of 3.00 cm³. Sample Y has a mass of 24.3 g and a volume of 9.00 cm³. What can you conclude?
Question 5 of 5
On an NFPA 704 hazard diamond, which square rates the health hazard?
