Chemistry › Section A · Essential ideas › Topic A.4
Measurements and units
A number without a unit is useless, and a unit read wrongly can be disastrous. This topic sets out the international system of units that every chemist uses, the prefixes that scale them, and density, the first quantity built from them.
Every measurement has three parts
A measurement reports a number, a unit and, at least implicitly, an uncertainty. Saying a bottle holds "2" means nothing until you add litres; the unit is the standard you are comparing against. Mixing units up has real costs. In 1999 NASA lost the Mars Climate Orbiter because one team's software reported thruster data in pound-force seconds while the navigation team's software expected newton-seconds, and the spacecraft flew far too low over Mars and was lost. The uncertainty, how far the true value might lie from the reported one, is the subject of the next topic.
Scientific notation
Chemistry deals with numbers that are huge or tiny, so they are written in scientific notation: a number from 1 up to (but not including) 10, multiplied by a power of ten. The distance from Earth to the Moon, about 384,000,000 m, becomes \(3.84 \times 10^{8}\) m: the decimal point moved 8 places left, so the power is 8. A human hair is about 0.00007 m wide, which is \(7 \times 10^{-5}\) m: the point moved 5 places right, so the power is \(-5\). A positive power means a number of 10 or more; a negative power means a number less than 1.
The SI base units
Scientists worldwide use the International System of Units, the SI, adopted in 1960 and now built on seven base units (the mole joined in 1971). They are the metre (m) for length, the kilogram (kg) for mass, the second (s) for time, the kelvin (K) for temperature, the ampere (A) for electric current, the mole (mol) for amount of substance, and the candela (cd) for brightness of light. Since 2019 every base unit has been defined by fixing the exact value of a defining constant, mostly constants of nature. The metre, for example, is set by the speed of light, and the kilogram by a quantity from quantum physics called the Planck constant, so the definitions no longer depend on any physical object.
Prefixes scale the units
Instead of new names for bigger or smaller units, the SI adds a prefix meaning a power of ten. The common ones are giga (G, \(10^{9}\)), mega (M, \(10^{6}\)), kilo (k, \(10^{3}\)), deci (d, \(10^{-1}\)), centi (c, \(10^{-2}\)), milli (m, \(10^{-3}\)), micro (µ, \(10^{-6}\)), nano (n, \(10^{-9}\)) and pico (p, \(10^{-12}\)). So 3.5 km is \(3.5 \times 10^{3}\) m, or 3,500 m, and 125 mg is \(125 \times 10^{-3}\) g, or 0.125 g. Capital letters matter: mm is a millimetre but Mm is a megametre, a billion times larger.
Length, mass and time
One metre is the distance light covers in a vacuum in exactly 1/299,792,458 s; it is a little longer than a yard, and an inch is exactly 2.54 cm. The kilogram is the only base unit whose name already has a prefix: the gram is \(10^{-3}\) kg, and a 1 kg bag of sugar weighs about 2.2 pounds. Mass is measured on a balance. The second is defined by the frequency of a particular radiation from caesium atoms, measured by atomic clocks; minutes, hours and days are accepted alongside it.
Temperature in kelvin and Celsius
The SI temperature unit is the kelvin, symbol K, written without the word degree or a degree sign. The kelvin scale starts at absolute zero, 0 K, the lowest temperature possible, so it has no negative values. The Celsius scale uses degrees of exactly the same size but places its zero 273.15 units higher:
At normal atmospheric pressure water freezes at 0 °C, which is 273.15 K, and boils at 100 °C, which is 373.15 K. Normal body temperature, about 37 °C, is about 310 K. A rise of 1 °C is a rise of exactly 1 K. Fahrenheit conversions come in the next topic.
Volume, a derived unit
Units built from base units are called derived units. Volume is length cubed, so its SI unit is the cubic metre, \(\text{m}^3\), a large box. Chemists more often use the litre (L), defined as one cubic decimetre: a cube 10 cm on each side. Because \(10 \times 10 \times 10 = 1000\),
So one millilitre equals one cubic centimetre, and doctors often write it as cc. Likewise \(1 \text{ m}^3 = 1000\) L. Cubing a length unit cubes its conversion number: a metre is 100 cm, but a cubic metre is a million cubic centimetres.
Density
Density is mass per unit volume:
where \(\rho\) is the Greek letter rho. Its SI unit is the kilogram per cubic metre, but chemists usually give solids and liquids in g/cm³ (the same as g/mL) and gases in g/L. Near room temperature, water is about 1.00 g/cm³, ethanol 0.789, aluminium 2.70, iron 7.87, lead 11.3 and gold 19.3 g/cm³, while air is only about 1.2 g/L. An object less dense than a liquid floats in it, which is why ice, at about 0.92 g/cm³, floats on water. Density changes slightly with temperature, so tables state the temperature.
Worked example: density of a block
A rectangular block of silvery metal measures 5.00 cm by 2.00 cm by 1.50 cm and has a mass of 40.5 g. What is its density, and what might it be? 1. Volume of a rectangular block is length times width times height: \(5.00 \times 2.00 \times 1.50 = 15.0\) cm³. 2. Density:
3. Compare with known values: 2.70 g/cm³ matches aluminium. 4. Check: the answer is mass over volume, so the units are g/cm³, and 15.0 times 2.70 gives back 40.5 g.
Worked example: density by displacement
An irregular nugget of reddish metal has a mass of 66.0 g. A measuring cylinder holds 50.0 mL of water, and the level rises to 57.4 mL when the nugget is lowered in. 1. A sinking object pushes aside its own volume of water, so the nugget's volume is \(57.4 - 50.0 = 7.4\) mL, which is 7.4 cm³. 2. Density: \(66.0 \div 7.4 \approx 8.9\) g/cm³, kept to two digits for a reason the next topic explains. 3. Copper is about 8.96 g/cm³, so the nugget is very likely copper. 4. Check: dividing by the final reading, 57.4 mL, would give about 1.15 g/cm³, far too low for a metal that sinks, which is a sign of using the wrong volume.
Common mistakes to avoid
First, writing a number with no unit, or the wrong case for a symbol: m is milli or metre, M is mega, and K is kelvin while k is kilo. Second, writing °K: the kelvin takes no degree sign. Third, forgetting that a cubed unit cubes its conversion number: 1 m³ is \(10^6\) cm³, not 100 cm³. Fourth, dividing volume by mass instead of mass by volume when finding density. Fifth, using the total water level, rather than the rise, as an object's volume. Sixth, confusing mass and weight: a balance measures mass in kilograms, while weight is a force in newtons.
Key takeaways
A measurement needs a number, a unit and an uncertainty. Scientific notation writes a number as a value from 1 to under 10 times a power of ten. The SI has seven base units, including the metre, kilogram, second, kelvin and mole, all now defined by exactly fixed constants. Prefixes from pico (\(10^{-12}\)) to giga (\(10^{9}\)) scale them. Kelvin equals Celsius plus 273.15. Volume is a derived unit, with 1 L = 1000 cm³ and 1 mL = 1 cm³. Density, mass divided by volume, can be found from measured dimensions or by water displacement.
Flashcards
Flashcard
A number, a unit and an uncertainty
Test your understanding
Question 1 of 5
Which of these is one of the seven SI base units?
Question 2 of 5
How many milligrams are there in 0.125 g?
Question 3 of 5
A room is at 25 °C. What is this temperature in kelvin?
Question 4 of 5
A rectangular block measures 4.00 cm by 3.00 cm by 2.00 cm and has a mass of 64.8 g. What is its density?
Question 5 of 5
A metal sample of mass 136 g is lowered into a measuring cylinder, and the water level rises from 30.0 mL to 42.0 mL. What is the metal's density?
