Chemistry › Section D · Stoichiometry of reactions › Topic D.3
Reaction stoichiometry
A balanced equation tells you more than which substances react: its coefficients say exactly how much of each is used and made. Stoichiometry turns that information into grams, litres and numbers of molecules, which is how chemists, engineers and pharmacists plan every reaction they run.
A balanced equation is a recipe
A workshop that builds bicycles needs one frame and two wheels for every bike. To build 30 bikes it needs 30 frames and 60 wheels, and 50 wheels on the shelf are enough for only 25 bikes. A balanced chemical equation works the same way, except that it counts particles. Stoichiometry, from Greek words for element and measure, is the study of these quantitative relationships between the reactants and products of a reaction. Every stoichiometry problem, however it is dressed up, relies on one step: using the coefficients of the balanced equation to convert an amount of one substance into an amount of another.
Mole ratios from coefficients
Coefficients give the ratio of particles, and so also the ratio of moles, in which substances react. In \(\mathrm{N_2 + 3H_2 \to 2NH_3}\), one mole of nitrogen reacts with three moles of hydrogen to give two moles of ammonia. Any pair of substances gives a conversion factor, such as
Choose the factor with the unit you want on top and the unit you have on the bottom, so the unwanted unit cancels. For example, 0.90 mol of hydrogen gives \(0.90 \times \frac{2}{3} = 0.60\) mol of ammonia. Coefficients never give mass ratios directly: 1 g of nitrogen does not react with 3 g of hydrogen.
The road map
The mole ratio only connects moles, so every other quantity must be converted to moles first and back again at the end. Mass converts with molar mass: divide grams by grams per mole. Number of particles converts with the Avogadro constant, \(6.022 \times 10^{23}\ \text{mol}^{-1}\). A solution converts with its molarity, using \(n = cV\) with the volume in litres. The full path for a mass-to-mass problem is
Writing the units on every factor lets you see each one cancel, and it catches an upside-down ratio before it ruins the answer.
Worked example: moles and molecules
Iron reacts with oxygen to form iron(III) oxide, the main part of rust: \(\mathrm{4Fe + 3O_2 \to 2Fe_2O_3}\). How many moles and how many molecules of oxygen react with 0.250 mol of iron? 1. Pick the factor relating the two substances: 3 mol \(\mathrm{O_2}\) per 4 mol Fe. 2. Convert: \(0.250\ \text{mol Fe} \times \frac{3\ \text{mol O}_2}{4\ \text{mol Fe}} = 0.1875\) mol, which rounds to 0.188 mol \(\mathrm{O_2}\). 3. Convert to molecules with the unrounded value: \(0.1875 \times 6.022 \times 10^{23} = 1.13 \times 10^{23}\) molecules. 4. Check: less oxygen than iron is needed, as the 3 : 4 ratio predicts, and three significant figures match the data.
Worked example: from grams to grams
What mass of ammonia can be made from 50.0 g of nitrogen, with enough hydrogen? Molar masses: \(\mathrm{N_2}\) 28.02 g/mol, \(\mathrm{H_2}\) 2.016 g/mol, \(\mathrm{NH_3}\) 17.03 g/mol. 1. Grams to moles: \(50.0 \div 28.02 = 1.784\) mol \(\mathrm{N_2}\). 2. Mole ratio: \(1.784 \times \frac{2}{1} = 3.569\) mol \(\mathrm{NH_3}\). 3. Moles to grams: \(3.569 \times 17.03 = 60.8\) g of ammonia. 4. Check with conservation of mass: the hydrogen used is \(1.784 \times 3 \times 2.016 = 10.8\) g, and \(50.0 + 10.8 = 60.8\) g, exactly the mass of ammonia formed. Carry extra digits through the middle steps and round only the final answer.
Worked example: the carbon dioxide from a gas grill
Propane burns as \(\mathrm{C_3H_8 + 5O_2 \to 3CO_2 + 4H_2O}\). A full barbecue cylinder holds 9.00 kg of propane (molar mass 44.10 g/mol). What mass of carbon dioxide does burning it all release? 1. Convert to grams and moles: \(9000\ \text{g} \div 44.10 = 204.1\) mol of propane. 2. Mole ratio: \(204.1 \times 3 = 612.2\) mol of \(\mathrm{CO_2}\). 3. Mass: \(612.2 \times 44.01 = 26{,}940\) g, or 26.9 kg. 4. The oxygen consumed is \(204.1 \times 5 \times 32.00\) g, or 32.65 kg. 5. Check, keeping an extra digit: reactants total \(9.00 + 32.65 = 41.65\) kg, and the products, 26.94 kg of \(\mathrm{CO_2}\) plus 14.71 kg of water, also total 41.65 kg. The carbon dioxide outweighs the fuel threefold because it carries oxygen taken from the air.
Worked example: a reaction in solution
What volume of 0.150 M sulfuric acid neutralises 25.0 mL of 0.200 M sodium hydroxide? The equation is
1. Moles of base: \(n = cV = 0.200\ \text{mol/L} \times 0.0250\ \text{L} = 5.00 \times 10^{-3}\) mol NaOH. 2. Mole ratio, 1 acid to 2 base: \(5.00 \times 10^{-3} \div 2 = 2.50 \times 10^{-3}\) mol \(\mathrm{H_2SO_4}\). 3. Volume of acid: \(V = n/c = 2.50 \times 10^{-3} \div 0.150 = 0.0167\) L, or 16.7 mL. 4. Check: each acid molecule neutralises two hydroxide ions, so less acid volume is needed than base, even though the acid is a little less concentrated.
Checking a stoichiometry answer
Three quick tests catch most errors. First, units: if the factors are written with units, the final unit must be the one asked for. Second, direction: if the ratio is 3 : 1, the moles of the substance with coefficient 3 must be three times larger, so look at whether your number grew or shrank as it should. Third, conservation: when every reactant and product is known, the total mass of the reactants equals the total mass of the products. Report the answer to the number of significant figures in the least precise measured value; coefficients are exact, and molar masses are usually known to more figures than the data, so neither limits it.
Common mistakes to avoid
First, applying the mole ratio to grams: coefficients relate moles, so convert to moles before using them. Second, turning the ratio upside down; writing units on the factor shows the error at once. Third, forgetting the last conversion and reporting moles when the question asks for grams. Fourth, using millilitres in \(n = cV\): the volume must be in litres when the concentration is in mol/L. Fifth, using an unbalanced equation, which gives every ratio wrong. Sixth, rounding at every step, which can shift the last significant figure.
Key takeaways
Stoichiometry uses the coefficients of a balanced equation as mole ratios between any two substances in a reaction. Everything goes through moles: divide mass by molar mass, divide particles by the Avogadro constant, or multiply a solution's molarity by its volume in litres. Then apply the mole ratio and convert back to the unit required. Write units on every factor, carry extra digits until the end, and check the result for direction, units and conservation of mass.
Flashcards
Flashcard
Working out how much of each substance a reaction uses up and makes
Test your understanding
Question 1 of 5
In 2C₂H₆ + 7O₂ → 4CO₂ + 6H₂O, how many moles of O₂ react with 4.00 mol of C₂H₆?
Question 2 of 5
Methane burns as CH₄ + 2O₂ → CO₂ + 2H₂O. What mass of CO₂ forms when 10.0 g of CH₄ (16.04 g/mol) burns completely? (CO₂: 44.01 g/mol)
Question 3 of 5
What volume of 0.250 M NaOH neutralises 20.0 mL of 0.100 M H₂SO₄? (H₂SO₄ + 2NaOH → Na₂SO₄ + 2H₂O)
Question 4 of 5
What do the coefficients in a balanced equation tell you directly?
Question 5 of 5
How many O₂ molecules react with 0.500 mol of CH₄ in CH₄ + 2O₂ → CO₂ + 2H₂O?
