Chemistry › Section I · Gases › Topic I.6
Non-ideal gas behaviour
No real gas obeys PV = nRT exactly. Real molecules take up space and attract each other, and under high pressure or at low temperature those effects grow large enough to matter. Knowing when and why the ideal gas law fails tells you when you can trust it.
Where the ideal model breaks down
Kinetic-molecular theory assumes that gas particles have negligible volume and exert no forces on each other between collisions. Real molecules break both assumptions. Each has a definite size, and molecules attract one another, weakly at a distance and more strongly when close. In a gas at 1 atm and room temperature the molecules are, on average, about ten diameters apart, so neither effect matters much and the ideal gas law is accurate to within about a percent for most gases. Squeeze the gas or cool it, and the molecules spend more time close together, where their size and attractions both start to show.
Measuring non-ideality: the compressibility factor
A simple way to see how far a gas departs from ideal behaviour is the compressibility factor, \(Z\):
where \(V_m\) is the measured molar volume. For an ideal gas, \(Z = 1\) at every pressure and temperature. When \(Z < 1\), the gas occupies less volume than an ideal gas would under the same conditions, which signals that attractions are pulling the molecules together. When \(Z > 1\), it occupies more, which signals that the molecules' own volume is crowding them apart. The further \(Z\) is from 1, the worse the ideal gas law describes the gas.
How Z changes with pressure
At very low pressure every gas has \(Z\) close to 1, because its molecules are far apart. For most gases, as pressure rises at room temperature, \(Z\) first falls below 1: the molecules are close enough for attractions to matter, but their own volume is still a small fraction of the total. At higher pressures, typically a few hundred atmospheres, \(Z\) climbs back through 1 and keeps rising, because the molecules now fill a significant share of the container and resist further squeezing. Helium and hydrogen, whose attractions are very weak, show \(Z > 1\) at every pressure at room temperature. Gases with strong attractions, such as carbon dioxide, dip furthest below 1.
Low temperature and condensation
Cooling a gas slows its molecules. Slow molecules spend longer near each other, so attractions hold them together more effectively, and \(Z\) falls further below 1. Cool a real gas enough, or compress it enough below a certain temperature, and the attractions win completely: the gas condenses to a liquid. The ideal gas law cannot predict this at all, since an ideal gas has no attractions and would stay a gas down to absolute zero. This is why the gas laws work best for gases far above their boiling points, such as nitrogen and oxygen at room temperature, and least well for vapours close to condensing, such as steam just above 100 °C.
The van der Waals equation
In 1873 Johannes van der Waals proposed a corrected gas equation with two constants, \(a\) and \(b\), measured for each gas:
The term \(nb\) subtracts the volume taken up by the molecules themselves, leaving the free space they can actually move in; \(b\) is in L mol⁻¹. The term \(\frac{an^2}{V^2}\) corrects the pressure: attractions tug each molecule back as it approaches a wall, so the measured pressure is lower than it would otherwise be, and \(a\) is in L² atm mol⁻². When \(V\) is large compared with \(nb\), and \(n/V\) is small, both corrections shrink and the equation becomes \(PV = nRT\).
Reading the van der Waals constants
Typical tabulated values are: helium, \(a = 0.0342\) L² atm mol⁻² and \(b = 0.0237\) L mol⁻¹; carbon dioxide, \(a = 3.59\) and \(b = 0.0427\); water, \(a = 5.46\) and \(b = 0.0305\). The constant \(a\) measures the strength of intermolecular attractions, so it is tiny for helium and large for water, whose polar molecules attract strongly, as the next section explains. Gases with large \(a\) values are generally the easiest to liquefy. The constant \(b\) tracks molecular size: larger molecules have larger \(b\). To use the equation for pressure, rearrange it:
Worked example: carbon dioxide at moderate pressure
A 5.00 L vessel holds 2.00 mol of \(\mathrm{CO_2}\) at 350 K. Find the pressure from the ideal gas law and from the van der Waals equation, with \(a = 3.59\) L² atm mol⁻² and \(b = 0.0427\) L mol⁻¹. 1. Ideal: \(P = \frac{nRT}{V} = \frac{2.00 \times 0.08206 \times 350}{5.00} = 11.5\) atm. 2. Volume term: \(V - nb = 5.00 - 2.00(0.0427) = 4.915\) L, so \(\frac{nRT}{V - nb} = \frac{57.44}{4.915} = 11.69\) atm. 3. Attraction term: \(\frac{an^2}{V^2} = \frac{3.59 \times 4.00}{25.0} = 0.574\) atm. 4. Van der Waals: \(P = 11.69 - 0.574 = 11.1\) atm. 5. Interpret: the real pressure is about 3% below ideal, so attractions outweigh molecular volume here, giving \(Z = 11.11 \div 11.49 = 0.967\).
Worked example: helium at high pressure
A 1.00 L cylinder holds 5.00 mol of helium at 300 K, with \(a = 0.0342\) L² atm mol⁻² and \(b = 0.0237\) L mol⁻¹. Compare the ideal and van der Waals pressures. 1. Ideal: \(P = \frac{5.00 \times 0.08206 \times 300}{1.00} = 123\) atm. 2. Volume term: \(V - nb = 1.00 - 5.00(0.0237) = 0.8815\) L, so \(\frac{123.09}{0.8815} = 139.6\) atm. 3. Attraction term: \(\frac{0.0342 \times 25.0}{1.00} = 0.855\) atm. 4. Van der Waals: \(P = 139.6 - 0.855 = 139\) atm. 5. Interpret: now the result is above ideal, \(Z \approx 1.13\), because helium's attractions are feeble while the excluded volume, nb = 0.1185 L, is over a tenth of the space. The equation is itself only approximate: measured Z for helium here is nearer 1.06, and engineers use more elaborate ones for precise high-pressure work.
Common mistakes to avoid
First, assuming the ideal gas law always fails for real gases: at low pressure and high temperature it is usually accurate to within a few percent. Second, mixing up the two constants: a is about attractions and lowers the pressure, while b is about molecular size and raises it. Third, reading \(Z < 1\) as a sign that molecular volume dominates; it means attractions dominate. Fourth, forgetting to square n and V in the attraction term. Fifth, using van der Waals constants given in bar units with R in L atm, or the reverse.
Key takeaways
Real gas molecules have volume and attract each other, so real gases depart from PV = nRT, most at high pressure and low temperature. The compressibility factor Z = PV/nRT is 1 for an ideal gas; Z < 1 means attractions dominate and Z > 1 means molecular volume dominates. Most gases dip below Z = 1 at moderate pressures and rise above it at high pressures. The van der Waals equation, (P + an²/V²)(V − nb) = nRT, adds a for attractions and b for molecular size. Gases behave most ideally at low pressure and at temperatures well above their boiling points.
Flashcards
Flashcard
Negligible particle volume and no attractions
Test your understanding
Question 1 of 5
Under which conditions does a sample of nitrogen gas behave most like an ideal gas?
Question 2 of 5
A gas has a compressibility factor Z = 0.90 under certain conditions. What does this show?
Question 3 of 5
Which gas has the largest van der Waals constant a?
Question 4 of 5
A gas at 300 K and 50.0 atm has a measured molar volume of 0.452 L/mol. What is its compressibility factor?
Question 5 of 5
In the van der Waals equation, what does the term nb correct for?
