Chemistry › Section R · Metals, metalloids, and nonmetals › Topic R.2

Representative metals

Sodium, aluminium, magnesium and zinc are everywhere in modern life, yet none of them occurs as a free metal in nature. This topic shows where they come from and the two strategies, electrolysis and chemical reduction, that industry uses to set them free.

Metals locked in minerals

Because representative metals lose electrons so readily, nature holds them as ions in compounds. Sodium and potassium chlorides lie in salt beds left by evaporated ancient seas; lithium comes mainly from brines and silicate minerals. Calcium and magnesium occur as carbonates such as limestone, \(\mathrm{CaCO_3}\), and dolomite, \(\mathrm{CaMg(CO_3)_2}\), and seawater holds magnesium ions. Beryllium is found in beryl, \(\mathrm{Be_3Al_2Si_6O_{18}}\), whose coloured forms are emerald and aquamarine. Aluminium comes from bauxite, tin from cassiterite, \(\mathrm{SnO_2}\), and zinc and lead mainly from their sulfides, sphalerite (\(\mathrm{ZnS}\)) and galena (\(\mathrm{PbS}\)).

Two ways to free a metal

Getting a metal out of a compound means reducing its cations back to atoms, \(\mathrm{M^{n+} + ne^- \rightarrow M}\). How hard that is decides the method. The ions of groups 1 and 2, and aluminium, have very negative standard reduction potentials, so they are usually made by electrolysis, using electrical energy to drive the unfavourable reduction. Metals whose ions are easier to reduce, such as zinc and tin, can be made by chemical reduction, typically heating the oxide with carbon. Chemical reduction is generally much cheaper, so industry uses it wherever it works.

Sodium: the Downs cell

Sodium is made by electrolysing molten sodium chloride in a Downs cell. Pure NaCl melts at 801 °C, so calcium chloride is added to lower the melting point to about 600 °C, a colligative effect that saves energy. At the cathode, sodium ions gain electrons; at the anode, chloride ions lose them:

\mathrm{Na^+ + e^- \rightarrow Na(l)} \qquad \mathrm{2Cl^- \rightarrow Cl_2(g) + 2e^-}

Overall, \(\mathrm{2NaCl(l) \rightarrow 2Na(l) + Cl_2(g)}\). The liquid sodium floats on the denser molten salt and is drawn off, kept apart from the chlorine, a valuable co-product. Electrolysing salt water instead would fail: water is reduced far more easily than \(\mathrm{Na^+}\), so hydrogen forms at the cathode, not sodium.

Aluminium: purifying the ore

Bauxite contains iron oxides, silica and clay as well as aluminium. In the Bayer process, the crushed ore is digested in hot, concentrated sodium hydroxide. Aluminium hydroxide is amphoteric, so it dissolves as aluminate, while most impurities stay behind as a red mud:

\mathrm{Al(OH)_3(s) + NaOH(aq) \rightarrow Na[Al(OH)_4](aq)}

After filtering, the solution is cooled and seeded with crystals of aluminium hydroxide, which then precipitates again. Strong heating then gives pure alumina:

\mathrm{2Al(OH)_3(s) \rightarrow Al_2O_3(s) + 3H_2O(g)}\,.

Alumina melts at over 2000 °C, far too hot for an industrial cell.

Aluminium: the Hall–Héroult process

In 1886 Charles Martin Hall in the United States and Paul Héroult in France independently found the answer: dissolve alumina in molten cryolite, \(\mathrm{Na_3AlF_6}\), which works at roughly 950-980 °C. In the Hall–Héroult cell, aluminium ions are reduced at the carbon-lined cathode, \(\mathrm{Al^{3+} + 3e^- \rightarrow Al(l)}\), and molten aluminium collects at the bottom. Oxide ions are oxidised at carbon anodes, which burn away and must be replaced, so the overall reaction is approximately

\mathrm{2Al_2O_3(s) + 3C(s) \rightarrow 4Al(l) + 3CO_2(g)}

Smelting uses roughly 13-15 kWh of electricity per kilogram of aluminium, so recycling, which needs only around 5% of that energy, matters greatly.

Worked example: charge to make aluminium

What charge is needed to make 1.00 kg of aluminium, and how long would a cell running at \(3.00 \times 10^5\) A take? Use \(F = 96{,}485\) C mol⁻¹. 1. Moles of Al: \(1000 \div 26.98 = 37.06\) mol. 2. Electrons: each \(\mathrm{Al^{3+}}\) needs 3, so \(3 \times 37.06 = 111.2\) mol of electrons. 3. Charge: \(Q = 111.2 \times 96{,}485 = 1.07 \times 10^7\) C. 4. Time: \(t = Q \div I = 1.073 \times 10^7 \div 3.00 \times 10^5 = 35.8\) s. 5. Check: about 37 mol of a 3+ ion needs about 110 mol of electrons, roughly \(10^7\) C. Real cells fall a little short of this ideal, because some current is wasted in side reactions.

Magnesium: from seawater or from rock

Magnesium can be made by electrolysis. In the classic Dow process, slaked lime precipitates magnesium hydroxide from seawater,

\mathrm{Mg^{2+}(aq) + Ca(OH)_2(s) \rightarrow Mg(OH)_2(s) + Ca^{2+}(aq)}\,;

hydrochloric acid converts it to magnesium chloride, which is dried, melted and electrolysed: \(\mathrm{MgCl_2(l) \rightarrow Mg(l) + Cl_2(g)}\). Today most magnesium, chiefly from China, comes from the Pidgeon process instead: magnesium oxide from roasted dolomite is heated with silicon, as ferrosilicon, at about 1200 °C under vacuum. In simplified form,

\mathrm{2MgO(s) + Si(s) \rightarrow 2Mg(g) + SiO_2(s)}

The equilibrium lies on the left, but magnesium leaves as a vapour and is condensed, so by Le Chatelier's principle the reaction keeps moving forward.

Potassium: reduced by sodium

Potassium is more reactive than sodium, yet it is made by heating molten potassium chloride with sodium at about 850 °C:

\mathrm{Na(g) + KCl(l) \rightleftharpoons NaCl(l) + K(g)}

On its own this equilibrium does not favour potassium. The trick is volatility: potassium boils at 759 °C and sodium at 883 °C, so the potassium vapour can be drawn off. Removing a product continually shifts the equilibrium to the right. Rubidium and caesium can be made the same way, using the same idea as the Pidgeon process.

Zinc and tin: roasting and carbon

Zinc sulfide is first roasted in air, which converts it to the oxide and releases sulfur dioxide:

\mathrm{2ZnS(s) + 3O_2(g) \rightarrow 2ZnO(s) + 2SO_2(g)}

The sulfur dioxide is captured and made into sulfuric acid. Heating the oxide with carbon gives zinc vapour,

\mathrm{ZnO(s) + C(s) \rightarrow Zn(g) + CO(g)}\,,

which is condensed; zinc's low boiling point, 907 °C, lets it be purified by distillation. Most zinc today is instead made by dissolving the roasted oxide in sulfuric acid and electrolysing the solution. Tin, known since ancient times because a charcoal fire can reduce its ore, is made above 1000 °C:

\mathrm{SnO_2(s) + 2C(s) \rightarrow Sn(l) + 2CO(g)}\,.

Worked example: zinc from its sulfide

A smelter roasts \(1.00 \times 10^3\) kg of pure zinc sulfide and reduces all the oxide to zinc. What mass of zinc and of sulfur dioxide results? 1. Molar masses: ZnS is \(65.38 + 32.06 = 97.44\) g mol⁻¹, and SO₂ is 64.06 g mol⁻¹. 2. Moles of ZnS: \(1.00 \times 10^6\) g \(\div 97.44 = 1.026 \times 10^4\) mol. 3. Each ZnS gives one Zn and one SO₂, by the 2 : 2 : 2 ratios in the roasting equation. 4. Zinc: \(1.026 \times 10^4 \times 65.38\) g \(= 671\) kg. 5. Sulfur dioxide: \(1.026 \times 10^4 \times 64.06\) g \(= 657\) kg. 6. Check: zinc is about two-thirds of the mass of ZnS, and \(0.671 \times 1000\) kg fits.

Common mistakes to avoid

First, thinking that electrolysing an aqueous solution can give sodium, magnesium or aluminium: water is reduced to hydrogen instead. Second, calling the cryolite in the Hall–Héroult cell a reactant; it is the solvent that lets alumina dissolve and be electrolysed at a workable temperature. Third, forgetting that aluminium needs three electrons per atom, which triples the charge compared with sodium. Fourth, assuming a more reactive metal can never be made by a less reactive one: removing potassium or magnesium vapour drives the reaction on.

Key takeaways

Representative metals occur as compounds in ores, brines and seawater. Metals of groups 1 and 2 and aluminium are made by electrolysis of molten compounds: sodium in the Downs cell, aluminium from Bayer-purified alumina in molten cryolite in the Hall–Héroult cell, magnesium from molten \(\mathrm{MgCl_2}\). The charge needed is moles of electrons times F. Chemical reduction is cheaper where it works: carbon reduces zinc and tin oxides, silicon reduces magnesium oxide in the Pidgeon process, and sodium reduces potassium chloride, the last two driven by removing a volatile metal.

Flashcards

Flashcard

Ore

A mineral deposit from which a metal can be extracted economically

Bauxite for Al, cassiterite for Sn, sphalerite for Zn.

Test your understanding

Question 1 of 5

Why can sodium metal not be made by electrolysing aqueous sodium chloride?

Question 2 of 5

What is the role of cryolite, Na₃AlF₆, in the Hall–Héroult process?

Question 3 of 5

How many moles of electrons are needed to produce 54.0 g of aluminium (26.98 g/mol)?

Question 4 of 5

In Na(g) + KCl(l) ⇌ NaCl(l) + K(g), why does the reaction produce potassium even though potassium is more reactive than sodium?

Question 5 of 5

Which equation correctly shows the roasting of zinc sulfide?

← Previous topicNext topic →