Chemistry › Section J · Liquids and solids › Topic J.5

Solids and crystal lattices

Diamond, salt, copper and ice are all solids, yet one cuts glass, one shatters, one bends and one melts in your hand. The kind of particle in a solid, how it is held and how it is stacked explain the differences, and a single repeating box, the unit cell, lets you calculate an atom's size from a measured density.

Crystalline and amorphous solids

In a crystalline solid the particles sit in a regular pattern that repeats in every direction, which is why crystals of salt or quartz have flat faces and sharp edges. Because every particle is held in the same way, a crystalline solid melts sharply at one temperature. In an amorphous solid, such as glass, wax or many plastics, the particles are jumbled with no long-range order. Their attractions vary from place to place, so they soften gradually over a range of temperatures instead of melting at one point. Some substances can be either: silicon dioxide forms crystalline quartz or, if cooled quickly from the melt, amorphous glass.

Four kinds of crystalline solid

Ionic solids, such as NaCl, are cations and anions held by strong electrostatic attraction: hard, brittle and high-melting (NaCl melts at 801 °C), conducting electricity only when molten or dissolved. Metallic solids are cations in a sea of delocalised electrons: they conduct as solids and are malleable, with melting points from −38.8 °C for mercury to 3422 °C for tungsten. Covalent network solids, such as diamond and quartz, are atoms joined by covalent bonds throughout: very hard and very high-melting. Molecular solids, such as ice, I₂ and dry ice, are molecules held by intermolecular forces: soft and low-melting.

Unit cells and counting atoms

A crystal lattice can be built by stacking copies of one small box, the unit cell, with no gaps. Most atoms in a cell are shared with neighbouring cells. A corner atom is shared by 8 cells, so it counts \(\tfrac{1}{8}\); an edge atom counts \(\tfrac{1}{4}\); a face atom counts \(\tfrac{1}{2}\); a body-centre atom belongs wholly to its cell. A simple cubic cell has atoms at its 8 corners only: \(8 \times \tfrac{1}{8} = 1\) atom. A body-centred cubic (bcc) cell adds one in the centre: 2 atoms. A face-centred cubic (fcc) cell adds one on each of the 6 faces: \(1 + 6 \times \tfrac{1}{2} = 4\) atoms.

Edge length and atomic radius

Atoms are treated as hard spheres of radius r that touch along one line, which sets the edge length a. In simple cubic, atoms touch along an edge, so \(a = 2r\). In bcc they touch along the body diagonal, of length \(\sqrt{3}a\), which spans 4r: \(a = \frac{4r}{\sqrt{3}}\). In fcc they touch along a face diagonal, of length \(\sqrt{2}a\), which also spans 4r: \(a = 2\sqrt{2}\,r\). Each atom touches 6, 8 and 12 neighbours respectively; this is its coordination number. The spheres fill 52%, 68% and 74% of the space. Polonium is the only element with a simple cubic structure; iron and sodium are bcc; copper, aluminium and gold are fcc.

Closest packing

74% is the most space identical spheres can fill, and two stacking patterns reach it. Picture a layer of spheres, each touching six others. A second layer sits in the dips of the first. A third layer can sit directly over the first, giving the pattern ABAB, hexagonal closest packing (hcp), found in magnesium and zinc. Or it can sit over the dips not yet used, giving ABCABC, cubic closest packing, which is exactly the fcc lattice. Both give every atom a coordination number of 12. The gaps between the spheres are holes: a tetrahedral hole lies between four spheres, a larger octahedral hole between six.

Worked example: copper's radius and density

Copper is fcc with an edge length of 361.5 pm. Find its atomic radius and density. 1. Radius: \(r = \frac{a}{2\sqrt{2}} = \frac{361.5}{2.828} = 127.8\) pm. 2. Volume of the cell: \(a = 3.615 \times 10^{-8}\) cm, so \(a^3 = 4.724 \times 10^{-23}\ \mathrm{cm^3}\). 3. Mass of the cell: 4 atoms, so \(m = \frac{4 \times 63.55}{6.022 \times 10^{23}} = 4.221 \times 10^{-22}\) g. 4. Density: \(\rho = \frac{m}{a^3} = 8.94\ \mathrm{g\ cm^{-3}}\). 5. Check: copper's measured density is 8.96 g cm⁻³, so the model works.

Worked example: which cubic cell is iron?

Iron has a density of 7.87 g cm⁻³ and a cubic unit cell with a = 286.6 pm. Is it simple cubic, bcc or fcc, and what is its radius? 1. Rearrange \(\rho = \frac{ZM}{N_A a^3}\) for the number of atoms per cell: \(Z = \frac{\rho N_A a^3}{M}\). 2. Volume: \((2.866 \times 10^{-8}\ \mathrm{cm})^3 = 2.354 \times 10^{-23}\ \mathrm{cm^3}\). 3. Substitute: \(Z = \frac{7.87 \times 6.022 \times 10^{23} \times 2.354 \times 10^{-23}}{55.85} = 2.00\). 4. Two atoms per cell means bcc. 5. Radius: \(r = \frac{\sqrt{3}a}{4} = 124.1\) pm. 6. Check: Z came out as a whole number, as it must for a real lattice.

Ionic lattices

In ionic crystals the formula comes from counting ions in the unit cell. In sodium chloride, Cl⁻ ions form an fcc pattern: \(8 \times \tfrac{1}{8} + 6 \times \tfrac{1}{2} = 4\). The smaller Na⁺ ions fill the octahedral holes, at the 12 edge centres and the body centre: \(12 \times \tfrac{1}{4} + 1 = 4\). Four of each confirms the 1:1 formula NaCl, and each ion has 6 neighbours of the opposite charge. In caesium chloride, Cl⁻ ions sit at the 8 corners (1 ion) and one Cs⁺ is at the centre (1 ion), with 8 neighbours each. This is not bcc, because the centre and corner particles are different; it is two interlocking simple cubic lattices.

Filling holes: the formula from the fraction

In many ionic solids the cations sit in the holes of a closest-packed array of anions.For every anion in the array there is one octahedral hole and there are two tetrahedral holes, so the fraction of holes the cations fill fixes the formula. NaCl fills every octahedral hole: 1 Na⁺ per Cl⁻. In lithium oxide, Li⁺ fills every tetrahedral hole among the O²⁻ ions: 2 Li⁺ per O²⁻, so Li₂O. In cadmium iodide, Cd²⁺ fills half the octahedral holes among the I⁻ ions: ½ Cd²⁺ per I⁻, so CdI₂. Check: both formulas balance the charges.

Defects and X-ray diffraction

Real crystals have defects: vacancies (missing particles), interstitials (extra particles between regular sites, like carbon among the iron atoms of steel) and substitutional impurities (like zinc replacing copper in brass). Even small amounts change a solid's strength or conductivity. Lattice spacings are measured by X-ray diffraction. X-rays reflected from parallel planes a distance d apart reinforce only at angles θ that obey the Bragg equation,

n\lambda = 2d\sin\theta

where n is a whole number. X-rays of λ = 154.2 pm reflecting in first order at θ = 21.7° from planes in copper give \(d = \frac{154.2}{2\sin 21.7^\circ} = 208.5\) pm.

Common mistakes to avoid

First, counting every atom drawn in a unit cell instead of applying the 1/8, 1/4 and 1/2 shares: a bcc cell holds 2 atoms, not 9. Second, using the wrong diagonal: bcc atoms touch along the body diagonal, fcc atoms along a face diagonal. Third, forgetting to convert picometres to centimetres before calculating a density in g cm⁻³, since 1 pm = 10⁻¹⁰ cm. Fourth, calling CsCl body-centred cubic. Fifth, assuming every hard solid is ionic: diamond and quartz are covalent networks, and ionic solids conduct only when molten or dissolved.

Key takeaways

Crystalline solids have long-range order and sharp melting points; amorphous solids soften over a range. Ionic, metallic, covalent network and molecular solids differ in particles and forces, and therefore in hardness, melting point and conductivity. A unit cell's atoms count 1/8 at a corner, 1/4 on an edge, 1/2 on a face and 1 inside, giving 1, 2 and 4 atoms for simple cubic, bcc and fcc. The edge lengths are a = 2r, a = 4r/√3 and a = 2√2 r, and the density is ρ = ZM/(N_A a³). Closest packing, as hcp or fcc, fills 74% of space. The fraction of holes filled gives an ionic formula, and X-ray spacings obey nλ = 2d sin θ.

Flashcards

Flashcard

Crystalline solid

Particles in a regular pattern repeating in all directions

Melts sharply at one temperature.

Test your understanding

Question 1 of 5

How many atoms belong to one body-centred cubic unit cell?

Question 2 of 5

In a face-centred cubic metal, how is the edge length a related to the atomic radius r?

Question 3 of 5

A solid is extremely hard, melts above 1600 °C and does not conduct electricity even when molten. What kind of solid is it most likely to be?

Question 4 of 5

Aluminium is face-centred cubic with an edge length of 404.9 pm. What is its atomic radius?

Question 5 of 5

In the caesium chloride unit cell, Cl⁻ ions sit at the 8 corners and one Cs⁺ ion sits at the centre. How many Cl⁻ ions belong to one cell?

← Previous topicNext topic →