Electrical Engineering › Section Y · Time-varying fields, Maxwell's equations, and plane waves › Topic Y.8
Uniform plane waves: derivation and characteristics
Solve the wave equation for the simplest possible case, a field that is the same everywhere across a plane, and the main facts about electromagnetic waves fall out: the fields are perpendicular to each other and to the direction of travel, their ratio is a fixed impedance, and their speed is set by the material alone.
The uniform plane wave
In this simplest wave, \(\tilde{\mathbf{E}}\) and \(\tilde{\mathbf{H}}\) have the same magnitude and phase at every point of each plane perpendicular to some axis. Choose that axis as z, so the fields may vary with z but not with x or y:
for every field component. Any other orientation follows by rotating the axes, because the material behaves the same in every direction. No real wave is uniform over an infinite plane, but the previous topic showed that every wave is locally planar far from its source, so this solution is a building block for radio links, radar and optics.
The fields lie in the plane
Take the z-component of the source-free Ampère-Maxwell law, \(\nabla \times \tilde{\mathbf{H}} = j\omega\varepsilon\tilde{\mathbf{E}}\):
Both derivatives on the left are zero, so \(\tilde{E}_z = 0\). The same step with the Maxwell-Faraday equation gives \(\tilde{H}_z = 0\). So a wave uniform over a plane has its electric and magnetic fields lying in that plane, with no component along z. Such a wave can therefore travel only along \(+z\) or \(-z\), at right angles to its planes of uniformity.
Solving along z
With no x or y dependence, the wave equation for the x-component of E reduces to an ordinary differential equation:
Its general solution is \(\tilde{E}_x = E_0^{+}e^{-j\beta z} + E_0^{-}e^{+j\beta z}\), where the constants are set by sources outside the region. In the time domain, \(e^{-j\beta z}\) gives \(\sin(\omega t - \beta z)\), a wave travelling towards \(+z\), and \(e^{+j\beta z}\) gives one travelling towards \(-z\), just as in the first topic of this section. The y-component behaves the same way. For a wave travelling towards \(+z\) with E along x,
Finding H from E
The magnetic field is not independent: the Maxwell-Faraday equation fixes it. With only \(\tilde{E}_x\) present and no x or y dependence, the curl has just a y-component, \(\partial\tilde{E}_x/\partial z\). So
which gives \(\tilde{\mathbf{H}} = \hat{\mathbf{y}}\,(\beta/\omega\mu)E_0e^{-j\beta z}\). The magnetic field points along y, perpendicular to both E and the direction of travel, and it has the same phase as E at every point. Since \(\hat{\mathbf{x}} \times \hat{\mathbf{y}} = \hat{\mathbf{z}}\), the cross product \(\mathbf{E} \times \mathbf{H}\) points in the direction of travel.
Wave impedance
The factor linking the fields simplifies: \(\beta/(\omega\mu) = \omega\sqrt{\mu\varepsilon}/(\omega\mu) = 1/\sqrt{\mu/\varepsilon}\). The quantity
is the wave impedance, or intrinsic impedance, of the medium, in ohms, so \(\tilde{\mathbf{H}} = \hat{\mathbf{y}}\,(E_0/\eta)e^{-j\beta z}\). In free space, \(\eta_0 = \sqrt{\mu_0/\varepsilon_0} \approx 377\,\Omega\), close to \(120\pi\). In a lossless dielectric with \(\mu_r = 1\), \(\eta = \eta_0/\sqrt{\varepsilon_r}\), always lower. Like the characteristic impedance of a transmission line, \(\eta\) is a ratio of field quantities, not a resistance that burns power.
Wavelength, speed and light
In the time domain, with the course's sine reference and \(E_0 = |E_0|\angle\psi\) rms, \(\mathbf{E} = \hat{\mathbf{x}}\sqrt{2}|E_0|\sin(\omega t - \beta z + \psi)\), and \(\mathbf{H}\) is the same along \(\hat{\mathbf{y}}\), divided by \(\eta\). The wavelength is \(\lambda = 2\pi/\beta\) and the phase velocity is
so \(\lambda = v_p/f\), and every material slows the wave and shortens its wavelength. In free space \(1/\sqrt{\mu_0\varepsilon_0} \approx 3.00 \times 10^{8}\,\text{m/s}\), which matched the measured speed of light and led Maxwell to conclude that light is an electromagnetic wave. Heinrich Hertz generated and detected radio waves in about 1887 to 1888, confirming the prediction.
Worked example: a wave in PTFE
A 2.4 GHz uniform plane wave travels through PTFE, a low-loss plastic with \(\varepsilon_r \approx 2.1\) and \(\mu_r = 1\). Find \(v_p\), \(\lambda\), \(\beta\) and \(\eta\). 1. Phase velocity: \(v_p = c/\sqrt{2.1} = 2.07 \times 10^{8}\,\text{m/s}\), about 0.69c. 2. Wavelength: \(\lambda = v_p/f = 8.63\,\text{cm}\), against 12.5 cm in free space. 3. Wavenumber: \(\beta = 2\pi/\lambda = 72.8\,\text{rad/m}\). 4. Wave impedance: \(\eta = 377/\sqrt{2.1} = 260\,\Omega\). Check: \(\beta\) should equal \(\sqrt{2.1}\) times the free-space value \(2\pi f/c = 50.27\,\text{rad/m}\), and \(1.449 \times 50.27 = 72.8\,\text{rad/m}\).
The plane-wave relations
The geometry generalises to any direction of travel, given by a unit vector \(\hat{\mathbf{k}}\):
They hold for phasors and for the time-domain fields alike. So E, H and \(\hat{\mathbf{k}}\) are mutually perpendicular, the magnitudes differ by \(\eta\), and E × H points along \(\hat{\mathbf{k}}\). Given any one field and the direction of travel, the other follows in one line, which is quicker than taking a curl.
Worked example: H from E
A uniform plane wave in free space travels towards \(+x\) with \(\tilde{\mathbf{E}} = \hat{\mathbf{z}}\,2.0e^{-j\beta x}\,\text{mV/m}\), rms. Find \(\tilde{\mathbf{H}}\). 1. Here \(\hat{\mathbf{k}} = \hat{\mathbf{x}}\), and \(\hat{\mathbf{x}} \times \hat{\mathbf{z}} = -\hat{\mathbf{y}}\). 2. Magnitude: \(2.0 \times 10^{-3}/377 = 5.31\,\mu\text{A/m}\). 3. So \(\tilde{\mathbf{H}} = -\hat{\mathbf{y}}\,5.31e^{-j\beta x}\,\mu\text{A/m}\), and in the time domain \(\mathbf{H} = -\hat{\mathbf{y}}\,7.50\sin(\omega t - \beta x)\,\mu\text{A/m}\). 4. Check the direction: \(\hat{\mathbf{z}} \times (-\hat{\mathbf{y}}) = +\hat{\mathbf{x}}\), the direction of travel, as E × H requires.
Common mistakes to avoid
First, giving a plane wave a field component along its direction of travel; uniform plane waves are purely transverse. Second, getting H's direction from habit instead of from \(\hat{\mathbf{k}} \times \tilde{\mathbf{E}}\), then checking that E × H points along \(\hat{\mathbf{k}}\). Third, using 377 Ω inside a material; use \(\eta_0/\sqrt{\varepsilon_r}\) for a dielectric with \(\mu_r = 1\). Fourth, using \(\lambda = c/f\) inside a material, where \(\lambda = v_p/f\) is shorter. Fifth, treating \(\eta\) as a resistance that dissipates power.
Key takeaways
For a wave uniform over planes of constant z, the fields have no z-components, and travel is towards \(+z\) for \(e^{-j\beta z}\) or \(-z\) for \(e^{+j\beta z}\). With \(\tilde{\mathbf{E}} = \hat{\mathbf{x}}E_0e^{-j\beta z}\), \(\tilde{\mathbf{H}} = \hat{\mathbf{y}}(E_0/\eta)e^{-j\beta z}\), in phase, with \(\eta = \sqrt{\mu/\varepsilon}\) and \(\eta_0 \approx 377\,\Omega\). E, H and \(\hat{\mathbf{k}}\) are mutually perpendicular, with E × H along \(\hat{\mathbf{k}}\) and \(\tilde{\mathbf{H}} = \hat{\mathbf{k}} \times \tilde{\mathbf{E}}/\eta\). Also \(\lambda = 2\pi/\beta\) and \(v_p = 1/\sqrt{\mu\varepsilon} = c/\sqrt{\mu_r\varepsilon_r}\).
Flashcards
Flashcard
Fields with the same magnitude and phase over each plane perpendicular to the direction of travel
Test your understanding
Question 1 of 5
What is the wave impedance of a lossless dielectric with εᵣ = 4.0 and μᵣ = 1?
Question 2 of 5
A plane wave in free space has rms electric field 1.0 V/m. What is the rms magnetic field?
Question 3 of 5
A wave travels towards −z with Ẽ along +x̂ in a lossless medium. Which way does H̃ point?
Question 4 of 5
What is the phase velocity of a plane wave in a lossless material with εᵣ = 2.25 and μᵣ = 1?
Question 5 of 5
Why does a uniform plane wave travelling along z have no z-component of E?
