Electrical Engineering › Section Y · Time-varying fields, Maxwell's equations, and plane waves › Topic Y.7
Wave equations and types of waves
In a region free of charges and currents, Maxwell's four coupled equations collapse into a single wave equation for each field. Its solutions come in a few basic shapes, and the simplest, the plane wave, turns out to describe almost any wave seen far enough from its source.
From four equations to one
Maxwell's equations couple four fields through four equations, and solving them directly, with every boundary condition, is hard. In many practical situations there is a shortcut. A radio wave crossing open air, or light travelling through glass, moves through a region that contains no charges or currents of its own; the sources are somewhere else. In such a region the equations can be combined to eliminate one field, leaving a single equation for the other. That equation is the electromagnetic counterpart of the one-dimensional wave equation met in "What electromagnetics is, the spectrum, and wave fundamentals", extended to three dimensions.
Source-free and lossless
Assume the region is source-free, \(\tilde{\rho}_v = 0\) and \(\tilde{\mathbf{J}} = 0\), and filled with a linear, uniform material that behaves the same in every direction, so \(\varepsilon\) and \(\mu\) are real constants. Since \(\mathbf{J} = \sigma\mathbf{E}\), setting \(\mathbf{J} = 0\) with a field present also means \(\sigma = 0\): no conduction current, so no power is drained from the wave and the medium is lossless. That is a good model for air, vacuum and low-loss insulators such as PTFE. Lossy media can be handled later with the same equations by letting the permittivity be complex; its imaginary part then represents loss.
The source-free equations
Using \(\tilde{\mathbf{D}} = \varepsilon\tilde{\mathbf{E}}\) and \(\tilde{\mathbf{B}} = \mu\tilde{\mathbf{H}}\) to remove D and B, the phasor Maxwell equations become
Notice the near-symmetry between E and H, broken only by a sign and by \(\mu\) and \(\varepsilon\) trading places. Notice too that \(\sigma\) has vanished, which confirms that the model contains no loss.
Deriving the wave equation
1. Take the curl of the second equation: \(\nabla \times \nabla \times \tilde{\mathbf{E}} = -j\omega\mu\,\nabla \times \tilde{\mathbf{H}}\). 2. Replace the curl of H using the fourth equation; since \(j \cdot j = -1\), the right side becomes \(\omega^2\mu\varepsilon\tilde{\mathbf{E}}\). 3. Use the vector identity
where the Laplacian \(\nabla^2\) is the sum of second partial derivatives in x, y and z, applied to each Cartesian component. 4. The first equation makes \(\nabla \cdot \tilde{\mathbf{E}} = 0\), so the left side is just \(-\nabla^2\tilde{\mathbf{E}}\). 5. Rearranging gives \(\nabla^2\tilde{\mathbf{E}} + \omega^2\mu\varepsilon\tilde{\mathbf{E}} = 0\).
The wave equations and β
Define the phase propagation constant \(\beta = \omega\sqrt{\mu\varepsilon}\), in rad/m. Then
The H equation follows by the same steps, starting from the fourth equation. These are the wave equations in phasor form, often called Helmholtz equations. Here \(\beta\) is the wavenumber of the earlier topic, combining frequency and material into one number. In the time domain the same equation reads \(\nabla^2\mathbf{E} = \mu\varepsilon\,\partial^2\mathbf{E}/\partial t^2\), a wave equation with speed \(1/\sqrt{\mu\varepsilon}\). E and H obey the same equation, and the curl equations tie them together: for the plane waves of the next topic they differ only by a direction and a constant factor, with units of V/m over A/m, which is ohms.
Worked example: β in two media
Find \(\beta\) and the wavelength at 1.5 GHz in free space and in a lossless dielectric with \(\varepsilon_r = 4.0\) and \(\mu_r = 1\). 1. \(\omega = 2\pi \times 1.5 \times 10^{9} = 9.42 \times 10^{9}\,\text{rad/s}\). 2. Free space: \(\beta_0 = \omega\sqrt{\mu_0\varepsilon_0} = \omega/c = 31.4\,\text{rad/m}\), so \(\lambda = 2\pi/\beta_0 = 20.0\,\text{cm}\). 3. Dielectric: \(\beta = \beta_0\sqrt{\varepsilon_r} = 31.4 \times 2.0 = 62.8\,\text{rad/m}\), so \(\lambda = 10.0\,\text{cm}\). 4. The wave speed there is \(1/\sqrt{\mu\varepsilon} = c/2 = 1.50 \times 10^{8}\,\text{m/s}\). Check: \(\sqrt{\mu_0\varepsilon_0} = 1/c\), and \(1/\sqrt{4\pi \times 10^{-7} \times 8.854 \times 10^{-12}}\) is indeed \(3.00 \times 10^{8}\,\text{m/s}\).
Phasefronts: three shapes of wave
The wave equation has many solutions, sorted by the shape of their phasefronts: surfaces on which the field has the same phase at a given instant. A spherical wave has phasefronts that are concentric spheres; it is what a source small compared with the observing distance produces, such as a phone antenna seen from across a valley. A cylindrical wave has concentric cylindrical phasefronts and comes from a long, thin source such as a line of current. A plane wave has flat, parallel phasefronts. Sound shows the same three shapes, from a hand clap, a long busy road and a large flat panel. The field's strength may vary across a phasefront; only the phase is constant on it.
Locally planar waves
Plane waves matter most, for two reasons. Some structures make them directly: a parabolic dish antenna converts the spherical wave from its feed into nearly flat phasefronts across the region in front of it. More importantly, every wave looks planar over a small enough patch far enough from its source, just as the ground looks flat to someone standing on it. A receiving antenna a few centimetres across, kilometres from a transmitter, sees phasefronts that are flat to a tiny fraction of a wavelength. Antenna engineers use the distance \(2D^2/\lambda\) for an aperture of width D as the start of this far region.
Worked example: how planar is the wave?
A spherical phasefront of radius R bulges away from a flat plane by about \(D^2/(8R)\) across a width D. Compare this with the 12.5 cm wavelength at 2.4 GHz. 1. A 15 cm phone 2.0 km from a transmitter: the bulge is \(0.15^2/16{,}000 = 1.4\,\mu\text{m}\), a phase error of \(2\pi \times 1.4 \times 10^{-6}/0.125 = 7 \times 10^{-5}\,\text{rad}\). Effectively a plane wave. 2. A 1.2 m dish 10 m from the source: the bulge is \(1.44/80 = 18\,\text{mm}\), a phase error of 0.90 rad, or about 52°. Not planar. 3. The far-region distance for the dish is \(2 \times 1.2^2/0.125 = 23\,\text{m}\). Check: at that distance the bulge is \(\lambda/16\), a phase error of 22.5°.
Common mistakes to avoid
First, using these wave equations in a region with sources or significant conductivity; they assume both are absent. Second, dropping the sign when \(j \cdot j = -1\), which turns \(+\beta^2\) into \(-\beta^2\) and gives a non-wave solution. Third, forgetting that \(\beta\) depends on the material as well as the frequency. Fourth, calling any wave from a small antenna a plane wave without checking the distance and the size of the receiving region. Fifth, defining a spherical wave by equal field strength on a sphere; it is the phase that is constant.
Key takeaways
In a source-free, lossless, linear, uniform material, Maxwell's equations reduce to \(\nabla^2\tilde{\mathbf{E}} + \beta^2\tilde{\mathbf{E}} = 0\) and the same for H, with \(\beta = \omega\sqrt{\mu\varepsilon}\) in rad/m and wave speed \(1/\sqrt{\mu\varepsilon}\). The derivation uses the curl equations and \(\nabla \times \nabla \times \mathbf{A} = \nabla(\nabla \cdot \mathbf{A}) - \nabla^2\mathbf{A}\). In a plane wave, E and H differ by a direction and an impedance. Waves are spherical, cylindrical or planar by phasefront shape, and any wave is locally planar far from its source, beyond about \(2D^2/\lambda\).
Flashcards
Flashcard
No charge density and no current density: ρᵥ = 0, J = 0
Test your understanding
Question 1 of 5
What is β at 100 MHz in a lossless material with εᵣ = 9 and μᵣ = 1?
Question 2 of 5
Why can the conductivity σ not appear in the source-free wave equations of this topic?
Question 3 of 5
In the derivation, the curl of the Maxwell-Faraday equation gives −jωμ(∇ × H̃). What does this become after using ∇ × H̃ = jωεẼ?
Question 4 of 5
A dish 0.50 m across operates at 10 GHz, where λ = 3.0 cm. Beyond about what distance does it see locally planar waves?
Question 5 of 5
What defines a wave as spherical?
