Physics › Section H · Fluids › Topic H.3

Archimedes' principle

A steel ship floats, a pebble sinks, and a helium balloon tugs upwards on its string. One principle, more than 2000 years old, explains all three: a fluid pushes up on anything in it, and the push matches the weight of fluid shoved out of the way.

Where the upward push comes from

Pressure in a fluid rises with depth, so the fluid pushes harder on the bottom of a submerged object than on its top. Take a block of height \(h\) and horizontal face area \(A\), upright in a liquid of density \(\rho\). The extra depth at the bottom face adds pressure \(\rho g h\), so the bottom is pushed up harder than the top is pushed down by

F_B = \rho g h A = \rho g V

where \(V = hA\) is the block's volume. The sideways pushes on opposite faces cancel. This net upward force from the fluid is the buoyant force. It acts on every object in a fluid, whether it floats, sinks or hovers: even an anchor feels lighter under water.

Archimedes' principle

The Greek mathematician Archimedes (about 287 to 212 BCE) stated the general rule: the upward push on a body matches the weight of the fluid that body pushes aside.

F_B = \rho_{\text{fl}}\, V_{\text{disp}}\, g

Here \(\rho_{\text{fl}}\) is the density of the fluid, not of the object, and \(V_{\text{disp}}\) is the volume of fluid pushed aside: the whole volume if the object is fully submerged, only the part below the surface if it floats. To see why it works for any shape, imagine the object replaced by fluid of the same shape. That fluid would sit still, so the surrounding fluid must push up on it with exactly its weight, and it pushes the same way on whatever fills the space.

Float, sink or hover

Fully submerged, an object of volume \(V\) and average density \(\rho_{\text{obj}}\) has weight \(\rho_{\text{obj}} V g\) and buoyant force \(\rho_{\text{fl}} V g\). The volume and \(g\) are common to both, so only the densities decide. If \(\rho_{\text{obj}} < \rho_{\text{fl}}\), the object rises and floats. If \(\rho_{\text{obj}} > \rho_{\text{fl}}\), it sinks. If they are equal, it hovers at any depth. It is the average density that counts: a lump of clay sinks, but the same clay shaped into a hollow boat encloses air, displaces more water and floats. Iron sinks in water but floats in mercury, which is about 1.7 times as dense.

How much of a floating object is submerged

A floating object sinks until it displaces its own weight of fluid: \(\rho_{\text{fl}} V_{\text{sub}} g = \rho_{\text{obj}} V g\). Cancelling \(g\) gives

\frac{V_{\text{sub}}}{V} = \frac{\rho_{\text{obj}}}{\rho_{\text{fl}}}

Ice, at \(917\ \mathrm{kg/m^3}\), floats 91.7% submerged in fresh water and \(917 \div 1025 = 89.5\%\) submerged in seawater. The ratio of a substance's density to that of water is its specific gravity, a pure number: below 1, it floats in water. A hydrometer, a weighted glass float, uses this rule to measure a liquid's density: it rides higher in denser liquids, so a scale on its stem reads the specific gravity directly.

Worked example: loading a barge

A flat-bottomed barge has a rectangular base 10.0 m by 4.00 m and an empty mass of \(2.00 \times 10^4\) kg. How deep does it sit in fresh water, and how much cargo can it carry if its sides allow a depth of 1.50 m? 1. Base area: \(A = 40.0\ \mathrm{m^2}\). Floating means the displaced water has the barge's mass: \(\rho A d = m\). 2. Empty depth: \(d = \frac{2.00 \times 10^4}{1000 \times 40.0} = 0.500\) m. 3. At 1.50 m it displaces \(40.0 \times 1.50 = 60.0\ \mathrm{m^3}\), or \(6.00 \times 10^4\) kg of water, so the cargo can be \(4.00 \times 10^4\) kg. 4. Check: three times the depth means three times the total mass, and \(3 \times 2.00 \times 10^4 = 6.00 \times 10^4\) kg.

Ships, submarines, fish and balloons

A steel ship floats because hull plus enclosed air has an average density below water's; loaded, it settles lower. A submarine changes its average density: flooding ballast tanks with seawater makes it sink, and blowing them out with compressed air makes it rise. Many bony fish adjust a gas-filled swim bladder to hover at depth. Air is a fluid too. A helium or hot-air balloon rises because the gas inside is less dense than the air it displaces. The buoyant force of air on you is tiny: a 70 kg person has a volume of about \(0.070\ \mathrm{m^3}\), so \(F_B = 1.20 \times 0.070 \times 9.80 = 0.82\) N.

Apparent weight

Hang an object from a spring scale and lower it into a liquid, and the reading drops. The scale now shows the apparent weight, the true weight minus the buoyant force:

w_{\text{app}} = w - F_B

The loss in weight equals the weight of liquid displaced. On a balance that reads in grams, the apparent mass loss equals the mass of liquid displaced. This gives a neat way to measure the volume of an irregular solid without a ruler: in water, every gram of apparent mass lost means \(1\ \mathrm{cm^3}\) of volume, since water's density is \(1.00\ \mathrm{g/cm^3}\).

Worked example: aluminium on a spring scale

A 3.00 kg block of aluminium, density \(2700\ \mathrm{kg/m^3}\), hangs from a spring scale and is fully submerged in water. What does the scale read? 1. True weight: \(w = 3.00 \times 9.80 = 29.4\) N. 2. Volume: \(V = \frac{3.00}{2700} = 1.111 \times 10^{-3}\ \mathrm{m^3}\). 3. Buoyant force: \(F_B = 1000 \times 1.111 \times 10^{-3} \times 9.80 = 10.9\) N. 4. Reading: \(29.4 - 10.9 = 18.5\) N. 5. Check with a ratio: the buoyant force is \(\frac{1000}{2700} = 0.370\) of the weight, and \(0.370 \times 29.4 = 10.9\) N, the same.

Worked example: is the bar gold?

A small yellow bar has a mass of 386 g in air and an apparent mass of 366 g when hung fully submerged in water. Is it consistent with pure gold, density \(19.3\ \mathrm{g/cm^3}\)? 1. Apparent mass loss: \(386 - 366 = 20.0\) g, which is the mass of water displaced. 2. Volume of water, and so of the bar: \(V = \frac{20.0\ \mathrm{g}}{1.00\ \mathrm{g/cm^3}} = 20.0\ \mathrm{cm^3}\). 3. Density: \(\rho = \frac{386}{20.0} = 19.3\ \mathrm{g/cm^3}\). 4. This matches gold. A gold-plated bar of lead (11.3) of the same mass would have a volume of about \(34\ \mathrm{cm^3}\) and lose about 34 g. The tale that Archimedes tested a king's crown this way is a famous legend, probably not history.

Common mistakes to avoid

First, using the object's density in \(F_B = \rho V g\); the density belongs to the fluid. Second, using the object's whole volume for a floating object; only the submerged part displaces fluid. Third, thinking heavy objects feel no buoyant force because they sink; a sinking object still gets the full \(\rho_{\text{fl}} V g\), just not enough. Fourth, believing buoyancy grows with depth; for a fully submerged object in a liquid, the pressure difference between top and bottom stays the same. Fifth, comparing mass instead of average density when predicting floating: a huge ship floats while a small nail sinks.

Key takeaways

Because pressure grows with depth, a fluid gives every object in it a net upward buoyant force. Archimedes' principle: F_B equals the weight of fluid displaced, ρ(fluid) × V(displaced) × g. Objects less dense on average than the fluid float, denser ones sink, and equal ones hover. A floating object's submerged fraction equals ρ(object)/ρ(fluid), so ice is about 92% submerged in fresh water and 89% in seawater. Apparent weight is true weight minus buoyant force, and the loss on weighing in water gives an object's volume and hence its density.

Flashcards

Flashcard

Buoyant force

The net upward force a fluid exerts on an object in it

Caused by pressure increasing with depth.

Test your understanding

Question 1 of 5

A stone with a volume of 2.0 L (2.0 × 10⁻³ m³) is fully submerged in water. Taking g = 9.80 m/s², what is the buoyant force on it?

Question 2 of 5

A block of wood floats in fresh water with 80% of its volume below the surface. What is the wood's density?

Question 3 of 5

A metal sample has a mass of 540 g in air and an apparent mass of 340 g when fully submerged in water. What is its density?

Question 4 of 5

An ice cube is moved from a glass of fresh water to a glass of seawater. How does it float in the seawater?

Question 5 of 5

A 5.00 kg iron block (density 7870 kg/m³) hangs from a spring scale, fully submerged in water. What does the scale read?

← Previous topicNext topic →