Physics › Section G · Statics, torque, and rotation › Topic G.1
The two conditions for equilibrium
Bridges, shelves, cranes and seesaws all stay put because the forces on them cancel in two separate ways. Learning both conditions, and the idea of torque behind the second, lets you find forces in structures you could never measure directly.
When balanced forces are not enough
Lay a ruler flat on a smooth table and push one end forwards and the other end backwards with equal forces, both at right angles to the ruler. The forces add to zero, yet the ruler spins. Now apply the same two forces at its middle, one against the other, and nothing happens. The difference is where the forces act. An object is in equilibrium only when it has no acceleration of any kind, linear or rotational. That takes two conditions, one about forces and one about their turning effects.
The first condition: zero net force
The first condition is that the net external force is zero:
In two dimensions this gives two component equations, \(\sum F_x = 0\) and \(\sum F_y = 0\), as in Newton's laws. An object meeting it has zero acceleration, so it is either at rest, called static equilibrium, or moving at constant velocity, called dynamic equilibrium: a book on a shelf, or a car cruising at a steady 25 m/s on a straight, level road. As the spinning ruler shows, this condition alone does not stop rotation.
Torque: the turning effect of a force
How well a force turns something about a pivot depends on three things: how big the force is, how far from the pivot it acts, and its direction. Think of opening a door: push hard, push near the handle, and push at right angles to the door. Torque, \(\tau\), combines all three:
Here \(r\) measures how far the force's point of application lies from the pivot, and \(\theta\) is the angle between the line from the pivot to that point and the force. The unit is the newton metre, N m. A 30 N push at right angles, 0.80 m from the hinges, gives \(\tau = 24\) N m.
The lever arm
Another way to read the formula is to group \(r\sin\theta\) as the lever arm, \(r_\perp\): the perpendicular distance from the pivot to the line along which the force acts. Then \(\tau = r_\perp F\). A 50 N pull at right angles on a spanner, 0.30 m from the bolt, gives 15 N·m. Pull at 30° to the handle instead and the lever arm shrinks to \(0.30 \sin 30° = 0.15\) m, so the torque halves to 7.5 N·m. A force whose line passes through the pivot has a lever arm of zero and gives no torque, however large it is: pushing on a door's hinges never opens it.
Which way it turns: the sign convention
In a flat plane, a torque can turn things only two ways about a pivot. The usual convention counts anticlockwise torques as positive and clockwise ones as negative; any convention works if you keep it for the whole problem. The sign depends on the pivot, since one force can turn an object anticlockwise about one point and clockwise about another. In three dimensions torque is a vector along the axis, found with the right-hand rule: curl your right hand's fingers the way the force tends to turn the object, and your thumb points along the torque. An anticlockwise torque seen from the front points towards you.
The second condition: zero net torque
The second condition is that the net external torque is zero:
Every torque must be measured about the same point, and torques of opposite senses carry opposite signs, so they can cancel. An object meeting both conditions has no linear acceleration and no angular acceleration. A useful result follows: when the net force is zero and the net torque is zero about one point, the net torque is zero about every point. So any point can serve as the pivot, even one where the object is not hinged.
Choosing the pivot
Since any point works, choose the one that makes the algebra easiest: usually a point where an unknown force acts. That force then has zero lever arm and drops out of the torque equation. A reliable method is: 1. Draw a free-body diagram showing every external force and where it acts. 2. Pick a pivot at an unknown force. 3. Write \(\sum \tau = 0\) with signs. 4. Use \(\sum F = 0\) for any force still unknown. 5. Check, for example by taking torques about a second point. For a uniform beam, its whole weight can be treated as acting at its midpoint; the next topic explains why.
Worked example: balancing a seesaw
A 24.0 kg child sits 1.75 m from the pivot of a light seesaw (its mass is negligible). Where must a 35.0 kg child sit to balance it, and what force does the pivot exert? Take g = 9.80 m/s². 1. Take torques about the pivot, so its force drops out. The weights act at right angles to the level board, so \(\sin\theta = 1\). 2. The first child's torque is anticlockwise and the second's clockwise: \(m_1 g d_1 - m_2 g d_2 = 0\). 3. Solve: \(d_2 = \frac{m_1 d_1}{m_2} = \frac{24.0 \times 1.75}{35.0} = 1.20\) m. 4. First condition: \(N = (24.0 + 35.0)(9.80) = 578\) N upwards. 5. Check: each torque is 412 N·m, and the heavier child sits closer, as expected.
Worked example: a plank on two supports
A uniform 5.0 m plank weighing 300 N rests on supports at its two ends. A 700 N person stands 1.5 m from the left end. Find both support forces. 1. Pivot at the left support, removing its force \(F_L\). 2. The right support force \(F_R\) acts 5.0 m away, anticlockwise; the person (1.5 m) and the plank's weight (2.5 m, its midpoint) act clockwise. 3. Torques: \(5.0F_R - 700(1.5) - 300(2.5) = 0\), so \(F_R = \frac{1800}{5.0} = 360\) N. 4. Forces: \(F_L + F_R = 1000\) N, so \(F_L = 640\) N. 5. Check about the right support: \(F_L = \frac{700(3.5) + 300(2.5)}{5.0} = 640\) N, and the support nearer the person carries more.
Common mistakes to avoid
First, using the distance along the object when the force is at an angle; the torque needs \(r\sin\theta\), the perpendicular lever arm. Second, mixing pivots: every torque in one equation must be about the same point. Third, dropping signs, so that clockwise and anticlockwise torques add instead of cancelling. Fourth, forgetting the object's own weight, or placing it anywhere but the midpoint of a uniform beam. Fifth, stopping after the torque equation; the force equation is usually needed for the last unknown. Sixth, calling torque a form of energy: N m here is a turning effect, not joules.
Key takeaways
Equilibrium needs two conditions. The first, zero net force, means no linear acceleration: static if at rest, dynamic if at constant velocity. The second, zero net torque, means no angular acceleration. Torque is τ = rF sin θ, or the force times its perpendicular lever arm, in N m; a force through the pivot has none. Anticlockwise is usually positive and clockwise negative, and every torque must be taken about the same point. When both conditions hold, the torque balance works about any point, so put the pivot where an unknown force acts, then use the force balance to finish.
Flashcards
Flashcard
No linear acceleration and no angular acceleration
Test your understanding
Question 1 of 5
An 80 N force is applied to a spanner 0.25 m from the bolt, at 60° to the handle. What torque does it produce about the bolt?
Question 2 of 5
A metre stick lies on frictionless ice. Equal horizontal forces push one end forwards and the other end backwards, both at right angles to the stick. What happens?
Question 3 of 5
A 30 kg child sits 2.0 m from the pivot of a light seesaw. How far from the pivot must a 45 kg child sit on the other side to balance it?
Question 4 of 5
A 500 N box sits 1.0 m from the left end of a uniform 4.0 m plank of weight 240 N, which rests on supports at its two ends. What force does the right support exert?
Question 5 of 5
In a statics problem, why is it useful to take torques about the point where an unknown force acts?
