Physics › Section K · Oscillations and waves › Topic K.5
Damped and forced oscillations
Real oscillations fade as friction and drag drain their energy, and engineers often add damping on purpose. Push an oscillator in time with its own natural rhythm, though, and even small pushes can build a huge response: resonance.
Why real oscillations fade
A plucked guitar string falls silent within seconds, and a swing stops unless someone keeps pushing. So far this section has assumed no friction or drag, but in real systems these nonconservative forces always act. As the topic on conservative and nonconservative forces showed, their work \(W_{nc}\) changes the mechanical energy:
For an oscillator, the damping force opposes the motion, so \(W_{nc}\) is negative and the mechanical energy steadily falls, usually becoming thermal energy. Since the total energy is \(\tfrac{1}{2}kA^2\), a falling energy means a shrinking amplitude. This gradual loss of oscillation energy is called damping.
Light damping
With only a little damping, the oscillator still swings back and forth, and its period and frequency stay almost exactly as they would be with no damping at all. Only the amplitude changes, shrinking a little with every cycle until the motion dies out. A displacement-time graph looks like an SHM cosine squeezed between two slowly closing envelopes. Because energy depends on the amplitude squared, a small fractional drop in amplitude means roughly twice that fractional drop in energy. As the damping is increased, the motion is held back more strongly and the period begins to lengthen noticeably.
Worked example: a fading oscillation
A mass on a spring starts with amplitude 5.00 cm and total energy 0.200 J, and its amplitude falls by 4.0% each cycle. What fraction of the energy is lost per cycle, and what are the amplitude and energy after 10 cycles? 1. Each cycle the amplitude is multiplied by 0.960, so the energy is multiplied by \(0.960^2 = 0.9216\): 7.8% is lost per cycle. 2. After 10 cycles: \(A = 5.00 \times 0.960^{10} = 3.32\) cm. 3. Energy: \(E = 0.200 \times 0.9216^{10} = 0.0884\) J. 4. Check: the amplitude ratio is \(3.32/5.00 = 0.665\), and its square, 0.442, matches the energy ratio \(0.0884/0.200\). Energy drains about twice as fast as amplitude, in percentage terms.
Underdamped, critically damped, overdamped
Picture an oscillator pulled aside and released from rest, with more and more damping. An underdamped system oscillates about equilibrium with a decaying amplitude, crossing equilibrium many times; light damping is its weakest form. A critically damped system returns to equilibrium in the shortest possible time without oscillating. An overdamped system also does not oscillate, but the damping is so heavy that it creeps back to equilibrium more slowly than the critically damped one. Critical damping marks the boundary between oscillating and not oscillating. A door closer and the needle of an analogue bathroom scale are designed close to it, so they settle quickly without swinging back and forth.
Forced oscillations
Every oscillator has a natural frequency, \(f_0\), the frequency at which it would oscillate with no damping and no driving force; for a mass on a spring, \(f_0 = \frac{1}{2\pi}\sqrt{k/m}\). Now drive it with a periodic force at some other frequency \(f\), like moving your hand up and down at the top of a spring holding a weight. Once the motion settles, the system oscillates at the driving frequency, not its own. Move your hand very slowly and the weight just follows it. Move it very quickly and the weight barely moves at all. In between, near \(f_0\), the weight's oscillation becomes far larger than your hand's.
Resonance
Driving a system at its natural frequency is called resonance, and the system is said to resonate. At resonance each push arrives just as the motion is ready for it, so energy is transferred into the oscillator most efficiently and the amplitude is greatest. The amplitude does not grow forever: it levels off when the energy added each cycle equals the energy damping removes. A graph of amplitude against driving frequency peaks just below \(f_0\): very close to it when the damping is light, further below as the damping grows, and with very heavy damping there is no peak at all. The less the damping, the taller and narrower the peak, so a lightly damped system responds strongly but only within a small range of frequencies. Heavy damping lowers the peak and spreads the response over a wider range.
Worked example: keeping a swing going
A child and swing, 30.0 kg in total on chains 2.50 m long, swing up to 0.100 m above the lowest point. Each cycle the amplitude falls by 3.0%. How much energy must each push supply, and how often should the pushes come? 1. Energy of the swing: \(E = mgh = (30.0)(9.80)(0.100) = 29.4\) J. 2. Fraction lost per cycle: \(1 - 0.970^2 = 0.0591\), so each push must add \(0.0591 \times 29.4 = 1.74\) J. 3. For resonance, push once per natural period: \(T = 2\pi\sqrt{2.50/9.80} = 3.17\) s, a slight underestimate because a 0.100 m rise means a swing of about 16°. 4. Check: the average power is only \(1.74/3.17 = 0.55\) W, which is why gentle, well-timed pushes are enough.
Worked example: a bumpy road
A 1200 kg car rests on a suspension with effective \(k = 1.10 \times 10^5\) N/m. It drives over a series of evenly spaced bumps 8.00 m apart. At what speed do the bumps drive the car at resonance? 1. Natural frequency: \(f_0 = \frac{1}{2\pi}\sqrt{\frac{1.10 \times 10^5}{1200}} = 1.52\) Hz. 2. The bumps arrive at frequency \(f = v/d\), so resonance needs \(v = f_0 d\). 3. Substitute: \(v = (1.524)(8.00) = 12.2\) m/s, about 44 km/h. 4. Check: at 12.2 m/s the car covers 8.00 m in 0.656 s, which is \(1/1.524\) s, one natural period per bump. Shock absorbers supply the damping that keeps this resonance from becoming dangerous.
Resonance in the world
Resonance is useful whenever a system must pick out one frequency. Tuning a radio sets the resonant frequency of its circuit to match one station's broadcast. Magnetic resonance imaging (MRI) drives hydrogen nuclei in the body with radio waves at their resonant frequency, about 64 MHz in a common 1.5 T scanner. Resonance can also do damage: a sung note at a wine glass's natural frequency can shatter a flawed glass, and machinery is mounted so its vibrations do not match the frame's natural frequencies. London's Millennium Bridge swayed sideways in 2000 as walkers fell into step with it, and was fixed by adding dampers. The 1940 Tacoma Narrows collapse is often called resonance, but engineers attribute it to aeroelastic flutter, in which the wind fed energy into a twisting motion of the deck itself.
Common mistakes to avoid
First, thinking light damping changes the period much; it mainly shrinks the amplitude. Second, treating amplitude and energy losses as equal; energy goes as amplitude squared. Third, describing critical damping as the most damping; overdamped systems have more and return more slowly. Fourth, assuming a driven system oscillates at its own natural frequency; once settled, it follows the driving frequency. Fifth, confusing \(\omega = \sqrt{k/m}\) in rad/s with \(f_0\) in Hz; divide by \(2\pi\). Sixth, thinking less damping makes resonance less likely; it makes the peak taller.
Key takeaways
Damping is the loss of oscillation energy to nonconservative forces, mostly as thermal energy. Light damping shrinks the amplitude while leaving the period nearly unchanged, and energy falls as the amplitude squared. Underdamped systems oscillate as they decay; critically damped systems return to equilibrium fastest without oscillating; overdamped systems return more slowly without oscillating. A driven oscillator settles at the driving frequency. Resonance, driving at the natural frequency f₀, gives the largest amplitude; less damping gives a taller, narrower peak.
Flashcards
Flashcard
Loss of oscillation energy to friction, drag and other nonconservative forces
Test your understanding
Question 1 of 5
A lightly damped oscillator loses 10% of its amplitude every cycle. What percentage of its energy does it lose each cycle?
Question 2 of 5
Released from rest, which kind of system returns to equilibrium in the shortest time without oscillating?
Question 3 of 5
A 0.250 kg mass hangs on a spring with k = 40.0 N/m. At what driving frequency will its amplitude be greatest?
Question 4 of 5
The damping of a driven oscillator is reduced. How does its amplitude-frequency graph change?
Question 5 of 5
A plucked guitar string vibrates with light damping. As the note fades, what happens?
