Physics › Section S · Vision, instruments, and wave optics › Topic S.4
Double-slit and multiple-slit interference
Shine light through two narrow slits and, instead of two bright lines, you get a row of bright and dark stripes. That pattern proved light is a wave, lets us measure wavelengths a millionth of a metre long, and becomes the sharp spectra of a diffraction grating.
Young's experiment
In the early 1800s Thomas Young passed light through two narrow, closely spaced slits and found a screen beyond them striped with bright and dark bands, called fringes. Particles would make just two bright lines. Waves explain the stripes: each slit diffracts the light, the two spreading waves overlap, and they interfere. For a steady pattern the two sources must be coherent, keeping a fixed phase relationship. Two separate lamps are not, because their phases change randomly many times each second. Young lit both slits from one source; today a laser, whose light is highly coherent, makes the experiment easy.
Path difference
Light leaves the two slits in phase, but to reach a given point on the screen it travels two different distances. Let the slit separation be \(d\) and the distance to the screen be \(L\), with \(L\) much larger than \(d\). Then the two paths to a point at angle \(\theta\) from the central line are almost parallel, and one is longer by
If this path difference is a whole number of wavelengths, crests arrive with crests and the waves reinforce. If it is a whole number plus a half, crests meet troughs and the waves cancel. The angle \(\theta\) is measured from the original beam direction.
Bright and dark fringes
Bright fringes, from constructive interference, lie at angles where
Dark fringes, from destructive interference, lie where
The whole number \(m\) is the order. The central bright fringe, \(m = 0\), sits straight ahead, where the paths are equal. For a given order, \(\sin\theta = m\lambda/d\), so closer slits or longer wavelengths spread the pattern wider. That fits the general rule that wave effects are biggest when the obstacle is small.
Fringes on the screen
A point at angle \(\theta\) lies a distance \(y = L\tan\theta\) from the centre of the screen. For small angles in radians, \(\sin\theta\) and \(\tan\theta\) are both almost equal to \(\theta\), so the bright fringes lie at
They are evenly spaced, with a fringe spacing
and each dark fringe sits midway between two bright ones. Turned round, \(\lambda = d\,\Delta y/L\), a way to measure a wavelength with a ruler. The approximation is excellent when \(y\) is much smaller than \(L\), as it usually is for double slits; it fails for the large angles of a grating.
Worked example: a green laser
Green laser light of wavelength 532 nm passes through two slits 0.250 mm apart onto a screen 2.00 m away. Find the fringe spacing and the distance from the centre to the third dark fringe. 1. Spacing:
or 4.26 mm. 2. Going outwards, the dark fringes have \(m + \tfrac{1}{2}\) equal to 0.5, 1.5 and 2.5, so the third is at \(2.5\,\Delta y\), which is 10.6 mm. 3. Check the approximation: the first bright fringe is at \(\sin\theta = \lambda/d\), which is \(2.13 \times 10^{-3}\), an angle of only 0.122°, so small angles are fine.
Worked example: measuring a wavelength
Light from an unknown laser passes through slits 0.500 mm apart. On a screen 1.50 m away, the distance spanning 10 fringe spacings measures 18.0 mm. Find the wavelength. 1. Measuring across many fringes reduces the error: \(\Delta y\) is 18.0 mm divided by 10, or 1.80 mm. 2. Rearrange: \(\lambda = d\,\Delta y/L\). 3. Substitute:
which is 600 nm, orange light. 4. Check: putting 600 nm back into \(\lambda L/d\) returns a spacing of 1.80 mm.
How many fringes?
Since \(\sin\theta\) can never exceed 1, the order is limited: \(m\lambda \le d\), so the highest possible order is the largest whole number not greater than \(d/\lambda\). For the green laser example, \(d/\lambda = 470\), so in principle there are hundreds of orders on each side. In practice the fringes fade with angle, because each narrow slit sends most of its light forwards, and only the central ones are bright. A later topic on single-slit diffraction explains that fading.
Diffraction gratings
A diffraction grating has a large number of equally spaced parallel slits or grooves, often hundreds per millimetre. Waves from neighbouring slits differ in path by \(d\sin\theta\), so the bright maxima obey the same condition, \(d\sin\theta = m\lambda\). The spacing comes from the line density \(N\): \(d = 1/N\), so 500 lines per mm means \(d = 2.00\ \mu\text{m}\). With many slits, waves add up fully only at exactly these angles and almost cancel everywhere else, so the maxima are much narrower and brighter than a double slit's. Reflection gratings work too: the tracks on a CD or DVD act as one, which is why they shimmer with colour.
Gratings and spectra
Send white light through a grating and the central maximum, \(m = 0\), stays white, because every wavelength has \(\theta = 0\) there. In each higher order, \(\sin\theta = m\lambda/d\) grows with wavelength, so the light spreads into a spectrum with violet nearest the centre and red farthest out, the reverse of a prism, which bends violet most. Higher orders spread more widely and can overlap. Because the maxima are so sharp, a spectrometer with a grating can measure wavelengths precisely, identifying elements from the light they emit.
Worked example: a grating spectrometer
A grating has 600 lines per mm. Find the angles of the orders for yellow sodium light, 589 nm, and the angular spread of the first-order spectrum from 400 nm to 700 nm. 1. Spacing: \(d = 1/600\) mm, or \(1.667 \times 10^{-6}\) m. 2. First order:
so \(\theta_1 = 20.7°\). 3. Second order: \(\sin\theta_2 = 0.707\), so \(\theta_2 = 45.0°\). 4. Third order would need \(\sin\theta = 1.06\), impossible, so two orders exist on each side, since \(d/\lambda = 2.83\). 5. First-order spectrum: 400 nm at 13.9° and 700 nm at 24.8°. Check: the angles are large, so the small-angle formula would not have worked here.
Common mistakes to avoid
First, using the bright-fringe condition for dark fringes; dark ones need \((m + \tfrac{1}{2})\lambda\). Second, forgetting that \(m = 0\) is the central bright fringe, so the third bright fringe away from it has \(m = 3\). Third, mixing units: \(\lambda\), \(d\) and \(L\) must all be in metres. Fourth, using lines per millimetre as \(d\); \(d\) is its reciprocal. Fifth, applying \(y = m\lambda L/d\) to a grating at large angles; use \(d\sin\theta = m\lambda\) and \(y = L\tan\theta\). Sixth, expecting a grating to bend violet most, as a prism does.
Key takeaways
Young's double slit showed that light is a wave; steady fringes need coherent sources. The path difference is d sin θ. Bright fringes: d sin θ = mλ. Dark fringes: d sin θ = (m + ½)λ, with m = 0, ±1, ±2. For small angles, y = mλL/d and the fringe spacing is Δy = λL/d, so a measured spacing gives the wavelength. The order is limited by m ≤ d/λ. A grating, with d = 1/(lines per unit length), obeys the same bright condition but gives much sharper maxima and spreads white light into spectra, red farthest out.
Flashcards
Flashcard
Two slits give a striped interference pattern
Test your understanding
Question 1 of 5
Light of wavelength 500 nm passes through two slits 0.200 mm apart onto a screen 1.60 m away. What is the fringe spacing?
Question 2 of 5
Which condition gives the dark fringes of a double slit, with m = 0, ±1, ±2, ...?
Question 3 of 5
Light of wavelength 600 nm falls on a grating with 500 lines per mm. Find the angle of the m = 1 bright maximum.
Question 4 of 5
A grating has 800 lines per mm. What is the highest order maximum it can produce for 650 nm light?
Question 5 of 5
White light passes through a diffraction grating. In the first-order spectrum, which colour appears farthest from the central maximum?
