Physics › Section S · Vision, instruments, and wave optics › Topic S.5
Single-slit diffraction and resolution limits
Send light through one narrow opening and it does not make a sharp image of the opening: it spreads into a bright central band edged by dark and dim fringes. The same spreading sets the finest detail that any eye, camera or telescope can ever see.
One slit, many fringes
Shine a laser through a single narrow slit onto a distant wall. Instead of a thin bright line, you see a broad, very bright central band with dark gaps on either side, then a series of much dimmer, narrower bright bands. This is single-slit diffraction. By Huygens's principle, every point across the opening sends out wavelets, all starting in phase. Straight ahead they arrive together and build the central maximum. At other angles they travel different distances, so they interfere, and at certain angles they cancel completely. The model assumes monochromatic light and a screen far away compared with the slit width.
Where the dark fringes fall
Let the slit width be \(D\) and look at an angle \(\theta\) from straight ahead. The ray from one edge travels \(D\sin\theta\) farther than the ray from the other edge. Suppose that extra distance is exactly one wavelength. Split the slit into a top half and a bottom half: each ray in the top half has a partner in the bottom half that travels \(\lambda/2\) farther, so every pair cancels and the screen is dark. The pairing works whenever the edge-to-edge difference is a whole number of wavelengths, so the dark fringes are at
The value \(m = 0\) is excluded, because straight ahead is the brightest point of all.
Not the double-slit rule
The single-slit equation looks almost identical to the double-slit equation \(d\sin\theta = m\lambda\) from the previous topic, and that is a classic trap. In the double-slit rule, \(d\) is the separation between two slits, and the equation gives the bright fringes, including \(m = 0\) at the centre. In the single-slit rule, \(D\) is the width of one slit, and the equation gives the dark fringes, with \(m = 0\) not allowed. The patterns differ too: the single slit's central maximum is twice as wide as each side maximum and far brighter. The side maxima lie roughly midway between dark fringes.
The width of the central maximum
For small angles, \(\sin\theta \approx \theta\) in radians, so on a screen a distance \(L\) away the \(m\)th dark fringe is at \(y_m = m\lambda L/D\) from the centre. The central maximum runs between the first dark fringes on either side, so its width is
Notice the surprising direction: a narrower slit gives a wider pattern. Halve the slit width and the central band doubles. A longer wavelength also spreads more, so red light diffracts more than blue through the same slit. If \(D\) is no larger than \(\lambda\), there are no dark fringes at all, and the light spreads over the whole space beyond the slit.
Worked example: measuring a slit with a laser
Red laser light of wavelength 650 nm passes through a single slit. On a wall 1.60 m away the central maximum is 8.00 mm wide. Find the slit width and the position of the second dark fringe. 1. The first dark fringe is half the central width from the centre: \(y_1 = 4.00\) mm. 2. The angle is small, 0.0025 rad, so use \(y_1 = \lambda L/D\). 3. Rearrange and substitute:
so the slit is 0.260 mm wide. 4. The second dark fringe has \(m = 2\), so \(y_2 = 2y_1 = 8.00\) mm from the centre. 5. Check: the slit is 400 wavelengths wide, so the spreading angle should be small, and it is.
Round openings and the Rayleigh criterion
Lenses, mirrors and pupils are circular. A circular opening of diameter \(D\) turns a point of light into a bright central disc surrounded by faint rings, with the first dark ring at \(\sin\theta = 1.22\lambda/D\); the factor 1.22 comes from the round shape. Two nearby point sources produce two overlapping discs that can blur into one. Lord Rayleigh's criterion says two points are just resolved when the centre of one disc falls on the first dark ring of the other. For small angles the smallest resolvable angle, in radians, is
A smaller \(\theta_R\) means finer detail, so resolution improves with a larger aperture or a shorter wavelength.
Worked example: a backyard telescope
A telescope's main mirror is 0.250 m across. For light of wavelength 500 nm, find its smallest resolvable angle and the smallest crater separation it could resolve on the Moon, \(3.84 \times 10^8\) m away. 1. Rayleigh criterion:
2. For a small angle, separation = distance × angle: \(s = r\theta_R\). 3. Substitute:
just under 1 km. 4. Check: the angle is about 0.5 arcseconds, sensible for this mirror. In practice, turbulence in the atmosphere usually blurs ground-based images to around 1 arcsecond, one reason telescopes are put in orbit.
Worked example: two headlights
In bright light the pupil of the eye is about 3.0 mm across. Taking a wavelength of 550 nm, at what distance do a car's two headlights, 1.40 m apart, merge into one? 1. Rayleigh criterion:
2. The lights merge when their angular separation \(s/L\) falls to \(\theta_R\), so \(L = s/\theta_R\). 3. Substitute:
about 6 km. 4. Check: this is the best the pupil allows. Real eyes do a little worse, because the retina's cell spacing and the lens's imperfections also limit sharpness.
Diffraction limits everywhere
Every wave passing through a limited opening spreads. A radio telescope 100 m across, observing the 21 cm radio waves from hydrogen gas, has \(\theta_R \approx 2.6 \times 10^{-3}\) rad. That is more than ten times worse than the human eye, despite the huge dish, because the wavelength is so long. Even a laser beam of diameter \(D\) spreads at an angle of order \(\lambda/D\). Microscopes face the same limit: details much smaller than about half the wavelength of the light cannot be resolved, however strong the magnification. Magnifying a blurred image only gives a bigger blur.
Common mistakes to avoid
First, treating \(D\sin\theta = m\lambda\) as a bright-fringe condition; for a single slit it locates dark fringes. Second, allowing \(m = 0\) in the single-slit rule, when the centre is the brightest point. Third, quoting the central-maximum width as \(\lambda L/D\), which is only the half-width. Fourth, thinking a wider slit gives a wider pattern; it is the other way round. Fifth, leaving out the factor 1.22 for a circular aperture, or using it for a slit. Sixth, using degrees in \(s = r\theta\) instead of radians. Seventh, forgetting to convert nanometres and millimetres to metres.
Key takeaways
Light through a single slit of width D forms a wide, bright central maximum with much dimmer side maxima. Dark fringes fall where D sin θ = mλ, with m = ±1, ±2 and so on, never 0; the double-slit rule instead gives bright fringes using the slit separation. For small angles the central maximum is 2λL/D wide, so narrower slits and longer wavelengths spread more. By the Rayleigh criterion, a circular aperture just resolves two points at θ = 1.22λ/D in radians. Larger apertures and shorter wavelengths resolve finer detail.
Flashcards
Flashcard
Spreading of light through one narrow slit into a bright centre with dark and dim fringes
Test your understanding
Question 1 of 5
Light of wavelength 600 nm falls on a single slit 0.100 mm wide. At what angle from the centre is the first dark fringe?
Question 2 of 5
In single-slit diffraction, what does D sin θ = mλ with m = 1 locate?
Question 3 of 5
A telescope with a 0.100 m aperture observes light of wavelength 550 nm. What is its smallest resolvable angle?
Question 4 of 5
Light of wavelength 650 nm passes through a slit 0.130 mm wide onto a screen 2.00 m away. How wide is the central maximum?
Question 5 of 5
Which change lets a telescope resolve finer detail?
