Physics › Section E · Work, energy, and power › Topic E.5

Conservation of energy

Energy is never created or destroyed; it only changes form or moves from one place to another. Keeping an honest account of every form, including the heat that friction produces, solves problems that would be hard to tackle with forces alone.

The great bookkeeping rule

Mechanical energy is conserved only when friction, drag and other nonconservative forces do no work, yet friction never makes energy simply disappear. A sliding box that stops has lost its kinetic energy, but the box and floor are now slightly warmer. Measure every form carefully and the total always balances. This is the law of conservation of energy: the total energy of an isolated system stays constant. Energy can change form, and it can move between objects within the system, but the total never changes. No experiment has ever found an exception, which makes this one of the most trusted and most useful principles in all of science.

Many forms of energy

Kinetic and potential energy are only two of the forms energy takes. Thermal energy is the random motion of the particles inside a material, which we sense as temperature. Chemical energy is stored in the bonds between atoms, released when fuel burns or when your cells use food. Electrical energy is carried by moving charges in circuits, and radiant energy by light and other electromagnetic waves. Nuclear energy is stored in atomic nuclei, released in reactors and in the Sun. Everyday devices are energy converters: a battery turns chemical energy into electrical energy, and a motor turns that into kinetic energy.

Joule and the nature of heat

Before the 1840s, many scientists thought heat was a fluid, separate from mechanical energy. James Prescott Joule tested the idea with falling weights that turned a paddle wheel inside an insulated container of water. The paddles stirred the water and its temperature rose, and the same amount of mechanical work always produced the same amount of heating. Work and heat were two forms of one quantity, energy, exchanged at a fixed rate. The SI unit of energy, the joule, honours him. His result turned conservation of mechanical energy into the much broader law that covers every form.

Energy accounting with friction

For a system where gravity, springs and friction act, the energy balance reads

KE_i + PE_i = KE_f + PE_f + E_{\text{th}}

Here \(E_{\text{th}}\) is the thermal energy produced, shared between the sliding object and the surface. For kinetic friction of constant size \(f\) acting over a sliding path of length \(d\), \(E_{\text{th}} = fd\). This is the same physics as \(W_{nc} = \Delta KE + \Delta PE\) from the previous topic, written so that the heat produced appears as a positive amount of energy. Brakes, sliding knees and skidding tyres all grow hot for this reason.

Worked example: a sled on a snowy hill

An 8.00 kg sled is moving at 2.00 m/s at the top of a hill 6.00 m high and reaches the bottom at 9.00 m/s. How much thermal energy did friction and air resistance produce? Take the bottom as the zero of potential energy. 1. Start: \(KE_i = \tfrac{1}{2}(8.00)(2.00)^2 = 16.0\) J and \(PE_i = (8.00)(9.80)(6.00) = 470.4\) J. 2. End: \(KE_f = \tfrac{1}{2}(8.00)(9.00)^2 = 324\) J and \(PE_f = 0\). 3. Balance: \(E_{\text{th}} = 16.0 + 470.4 - 324 = 162\) J. 4. Check: about a third of the starting 486 J became thermal energy, and if the slope is 30.0 m long the average resistive force is \(162.4/30.0 = 5.41\) N, a plausible value.

Worked example: friction, then a spring

A 1.50 kg block slides at 3.00 m/s across a smooth floor, crosses a rough patch 0.800 m long where kinetic friction is 4.50 N, then hits a spring with \(k = 600\) N/m on smooth floor. How far does it compress the spring? 1. Starting energy: \(KE_i = \tfrac{1}{2}(1.50)(3.00)^2 = 6.75\) J. 2. Thermal energy on the patch: \(fd = 4.50 \times 0.800 = 3.60\) J. 3. Left for the spring: \(6.75 - 3.60 = 3.15\) J. 4. Maximum compression: \(\tfrac{1}{2}(600)x^2 = 3.15\), so \(x = \sqrt{0.0105} = 0.102\) m. 5. Check: friction took over half the energy, so the compression is less than the 0.150 m a smooth floor would give.

A strategy for energy problems

1. Choose the system and the initial and final states. 2. List every form of energy at each state: kinetic, gravitational with a stated zero level, elastic, thermal. 3. Decide whether friction, drag or a push does work; if none does, mechanical energy is conserved. 4. Write the balance and solve. 5. Check: the sign and size of the answer should make sense. A frictionless pendulum shows the idea: at the ends of its swing it is still and all its energy is potential; at the bottom it is moving fastest and all is kinetic. Released 0.200 m above its lowest point, it passes through the bottom at \(\sqrt{2(9.80)(0.200)} = 1.98\) m/s.

Potential energy diagrams

A graph of potential energy \(U\) against position, with a horizontal line at the total energy \(E\), shows the possible motion at a glance. At each position the kinetic energy is the gap \(E - U\), so the object can only be where \(U \le E\). Where the line meets the curve the object stops and turns back: these are turning points. The force is the negative of the slope, pointing towards lower \(U\). A minimum of \(U\) is a stable equilibrium, like a marble in a bowl; a maximum is unstable, like a pencil balanced on its point. A 0.500 kg cart in a valley with \(E - U = 2.25\) J at the bottom moves at 3.00 m/s there.

Efficiency

Energy is conserved in every conversion, but not all of it ends up in the form you want; the rest usually becomes thermal energy. Efficiency measures the useful fraction:

\text{efficiency} = \frac{\text{useful energy out}}{\text{energy in}}

Real devices always fall below 100%. A car's petrol engine turns only roughly 20% to 30% of the fuel's chemical energy into work, while large electric motors can exceed 90%. An LED bulb gives the same light as an old incandescent bulb for about a sixth of the electrical power. If a motor uses 500 J to lift a 20.0 kg load 1.80 m, it delivers 352.8 J of useful work and is 70.6% efficient.

Common mistakes to avoid

First, saying energy is lost to friction as if it vanished: it becomes thermal energy, and the total is unchanged. Second, applying conservation of mechanical energy, \(KE_i + PE_i = KE_f + PE_f\), when friction acts. Third, forgetting the initial kinetic energy when an object is already moving at the start. Fourth, changing the zero of potential energy partway through. Fifth, writing an efficiency above 100%, which signals that the useful output and the input have been swapped. Sixth, using the straight-line distance for \(fd\) instead of the length of the sliding path.

Key takeaways

The total energy of an isolated system is constant: energy changes form or moves, but is never created or destroyed. Its forms include kinetic, potential, thermal, chemical, electrical, radiant and nuclear. Joule's experiments in the 1840s showed that work and heat are forms of the same quantity. With friction, KE(i) + PE(i) = KE(f) + PE(f) + E(th), where E(th) = fd. On a potential energy diagram, KE = E − U, turning points are where E = U, minima are stable and maxima unstable. Efficiency, useful energy out over energy in, is always below 100%.

Flashcards

Flashcard

Law of conservation of energy

The total energy of an isolated system is constant

Energy changes form but is never created or destroyed.

Test your understanding

Question 1 of 5

A 5.00 kg sled starts from rest at the top of a 4.00 m high hill and reaches the bottom at 7.00 m/s. How much thermal energy did friction produce?

Question 2 of 5

Which statement best expresses the law of conservation of energy?

Question 3 of 5

An electric motor uses 500 J of electrical energy to lift a 20.0 kg load by 1.80 m. What is its efficiency?

Question 4 of 5

On a potential energy diagram, an object has total mechanical energy 5.0 J. At a point where U = 2.0 J, what is its kinetic energy?

Question 5 of 5

A frictionless pendulum is released from rest 0.200 m above its lowest point. How fast does it move through the bottom of its swing?

← Previous topicNext topic →