Physics › Section E · Work, energy, and power › Topic E.6
Power
Walking up the stairs and sprinting up them take the same work, but sprinting does it faster. Power measures how quickly energy is transferred, and it is what engines, muscles and electricity bills are really rated by.
How fast, not how much
Lift a box onto a shelf slowly or quickly and you do the same work, \(mgh\), either way. What differs is the rate. A small motor and a large one can lift the same lift car to the same floor, but the large one gets there sooner. Power is the quantity that captures this difference: it is the rate at which work is done, or more generally the rate at which energy is transferred or converted. Two devices that do the same job have the same energy output, but the one with the higher power finishes first.
Defining power
Average power is work divided by the time taken:
More generally, \(P = \Delta E / t\) for any energy transferred or converted in time \(t\). The SI unit is the watt: \(1\ \mathrm{W} = 1\ \mathrm{J/s}\). Larger powers use prefixes: a kettle draws about 2 kW (kilowatts), and a large power station delivers around 1 GW (gigawatt), a billion watts. Power is a scalar, like energy. Rearranged, the definition gives energy from power: \(E = Pt\), which is the basis of every electricity bill.
Worked example: up the stairs
A 58.0 kg student climbs stairs with a vertical rise of 4.20 m in 5.00 s at steady speed. What average power does she supply against gravity? 1. Work against gravity: \(W = mgh = (58.0)(9.80)(4.20) = 2387\) J. 2. Power: \(P = 2387/5.00 = 477\) W. 3. Walking up the same stairs in 12.0 s needs only \(2387/12.0 = 199\) W: the same work, at well under half the power. 4. Check the units: J/s = W. In horsepower, introduced below, 477 W is about 0.64 hp. Her body actually uses food energy much faster than this: like any engine, it is far below 100% efficient, so most of the energy becomes heat.
Power, force and velocity
When a constant force \(F\) acts along the motion of an object moving at speed \(v\), the work in time \(t\) is \(Fd\), and \(d/t\) is the speed. So
With the average speed, this gives the average power; with the speed at an instant, it gives the power at that instant. If the force is at an angle to the velocity, only its component along the velocity counts, just as in the definition of work. The formula explains why going fast is costly: to hold a steady speed, an engine's force must balance the resistive forces, and the power it needs is that force times the speed.
Worked example: a car at motorway speed
At a steady 27.0 m/s, about 60 mph, drag and rolling resistance on a car total 620 N. What power must reach the wheels? 1. At steady speed the driving force balances the resistance, so \(F = 620\) N along the motion. 2. Power: \(P = Fv = (620)(27.0) = 16{,}740\) W, about 16.7 kW. 3. Check with energy: in one second the car travels 27.0 m, and \(620 \times 27.0 = 16{,}740\) J of work is done in that second. Drag grows with speed, so at higher speeds both factors in \(Fv\) rise and the power needed climbs steeply.
The horsepower
In the 1780s the Scottish engineer James Watt needed a way to sell his steam engines to mine owners who used horses, so he rated them in horsepower. One horsepower is about 746 W. The SI unit of power, the watt, is named after him. Car engines in the United States are still commonly advertised in horsepower, and the 16.7 kW in the previous example is about 22.4 hp, a small fraction of a typical engine's maximum rating, which is reserved for accelerating and climbing hills. Efficiency also applies to power: a motor drawing 2.00 kW and delivering 1.70 kW of mechanical power is 85% efficient.
The kilowatt-hour
Electricity companies charge for energy, not power, and they measure it in kilowatt-hours. One kilowatt-hour is the energy transferred at 1 kW for 1 hour:
Despite the word watt in its name, the kWh is a unit of energy. To find energy in kWh, multiply the power in kilowatts by the time in hours. A 2.00 kW kettle running for 3.00 minutes, which is 0.0500 h, uses \(2.00 \times 0.0500 = 0.100\) kWh. Large appliances that run for many hours, such as heaters and air conditioners, dominate most household bills.
Worked example: a space heater
A 1.50 kW electric heater runs 4.00 hours a day for 30 days, and electricity costs $0.16 per kWh. What does it cost to run? 1. Total time: \(4.00 \times 30 = 120\) h. 2. Energy: \(E = Pt = (1.50\ \mathrm{kW})(120\ \mathrm{h}) = 180\) kWh. 3. Cost: \(180 \times \$0.16 = \$28.80\). 4. Compare: a 10.0 W LED lamp on 5.00 hours a day for the same 30 days uses \(0.0100 \times 150 = 1.50\) kWh, which costs $0.24. 5. Check: 180 kWh is \(180 \times 3.6 \times 10^6 = 6.48 \times 10^8\) J, a large amount of energy, so a bill of tens of dollars is reasonable.
A sense of scale
Rough figures help you judge whether an answer is sensible. A phone charger draws a few watts to a few tens of watts. Averaged over a day, a person converts food energy at roughly 100 W. A fit cyclist can sustain a few hundred watts of mechanical power for an hour. On a clear day near noon, sunlight delivers roughly 1 kW to each square metre of ground facing the Sun. A family car's engine is rated at roughly 100 kW, and a large power station delivers around 1 GW. These are approximate, but they span about eight powers of ten.
Common mistakes to avoid
First, confusing kW with kWh: the kilowatt measures a rate, and the kilowatt-hour measures an amount of energy. Second, leaving time in minutes or hours when calculating power in watts, which needs seconds. Third, using the whole force in \(P = Fv\) when it acts at an angle; use the component along the velocity. Fourth, multiplying the work by the time instead of dividing. Fifth, using mass instead of weight in \(mgh\) when finding the work in a lifting problem. Sixth, treating a high power as a large amount of energy: a 2 kW kettle used for three minutes uses less energy than a 10 W lamp left on for a month.
Key takeaways
Power is the rate of doing work or transferring energy: P = W/t, or ΔE/t, in watts, where 1 W = 1 J/s. For a force along the motion, P = Fv, so holding a high speed against drag needs a lot of power. One horsepower is about 746 W. The kilowatt-hour is a unit of energy, 1 kWh = 3.6 × 10⁶ J, found by multiplying kilowatts by hours, and electricity cost is the energy in kWh times the price per kWh. The same work done in half the time needs twice the power.
Flashcards
Flashcard
The rate of doing work or transferring energy
Test your understanding
Question 1 of 5
A crane lifts a 500 kg load 12.0 m at steady speed in 20.0 s. What average power does it supply against gravity?
Question 2 of 5
How many joules are in one kilowatt-hour?
Question 3 of 5
A 2.00 kW appliance runs for 3.00 hours, and electricity costs $0.15 per kWh. What does this cost?
Question 4 of 5
A cyclist pushes forwards with a steady 45.0 N force along the motion while moving at 8.00 m/s. What power is delivered?
Question 5 of 5
Two students of equal mass climb the same staircase. One takes half as long as the other. How do the powers they supply against gravity compare?
