Physics › Section B · Kinematics in one and two dimensions › Topic B.4

Constant-acceleration equations and problem solving

When acceleration stays constant, four short equations link displacement, velocity, acceleration and time. With them, and a clear problem-solving routine, most straight-line motion problems become a few lines of algebra.

Five quantities and one assumption

Straight-line motion with constant acceleration is described by five quantities: the displacement \(\Delta x\), the initial velocity \(v_0\), the final velocity \(v\), the acceleration \(a\) and the elapsed time \(t\). The clock starts at zero, so the elapsed time is just \(t\); a subscript 0 marks a starting value. The equations in this topic rest on one assumption: the acceleration is constant, in size and direction, for the whole interval. A car braking steadily fits; a car in stop-start traffic does not, unless you split its motion into stages.

Velocity after a time

The first equation comes straight from the definition of acceleration, \(a = (v - v_0)/t\). Rearranging gives

v = v_0 + at

The velocity changes by \(at\) during the interval. This equation does not contain \(\Delta x\). A tram moving at 6.0 m/s that accelerates at \(0.80\ \mathrm{m/s^2}\) for 12 s reaches \(6.0 + 0.80 \times 12 = 15.6\) m/s. With signs included, it also handles slowing down.

Displacement from the average velocity

When acceleration is constant, the velocity changes at a steady rate, so its average over the interval is exactly halfway between the start and end values: \(\bar{v} = \tfrac{1}{2}(v_0 + v)\). Multiplying by the time gives

\Delta x = \tfrac{1}{2}(v_0 + v)\,t

This equation does not contain \(a\). A cyclist who speeds up steadily from 3.0 m/s to 9.0 m/s in 4.0 s averages 6.0 m/s and so covers \(6.0 \times 4.0 = 24\) m. Be careful: the halfway rule for the average velocity is true only for constant acceleration. For any other motion, the average velocity must come from \(\Delta x / t\).

Displacement without the final velocity

Substituting \(v = v_0 + at\) into the average-velocity equation removes \(v\):

\Delta x = \tfrac{1}{2}(v_0 + v_0 + at)\,t = v_0 t + \tfrac{1}{2}at^2

The first term is the displacement at the starting velocity alone; the second is the extra due to the acceleration. Starting from rest, \(v_0 = 0\) and \(\Delta x = \tfrac{1}{2}at^2\), so displacement grows with the square of the time. Double the time and the object goes four times as far; triple it and it goes nine times as far. A cart released from rest that rolls 0.50 m in its first second therefore rolls 2.0 m in its first two seconds. If \(t\) is the unknown and \(v_0 \neq 0\), the equation is a quadratic in \(t\): solve it with the quadratic formula and keep only the root that fits the situation.

Velocity without the time

The fourth equation removes \(t\). From the first equation, \(t = (v - v_0)/a\). Putting this into the average-velocity equation gives \(\Delta x = (v + v_0)(v - v_0)/(2a)\), and multiplying out:

v^2 = v_0^2 + 2a\,\Delta x

It is the natural choice when time is neither given nor asked for, as in stopping distances. Because velocities appear squared, solving for \(v\) means taking a square root, and the root's sign must be chosen from the direction of motion. If \(v_0^2 + 2a\,\Delta x\) comes out negative, the object never reaches that displacement.

Choosing the right equation

Each equation links four of the five quantities and leaves one out: \(v = v_0 + at\) has no \(\Delta x\); \(\Delta x = \tfrac{1}{2}(v_0 + v)t\) has no \(a\); \(\Delta x = v_0 t + \tfrac{1}{2}at^2\) has no \(v\); and \(v^2 = v_0^2 + 2a\Delta x\) has no \(t\). So if you know any three of the five, you can find the other two. Pick the equation that contains your unknown and leaves out the quantity you neither know nor need. Watch for hidden knowns: "starts from rest" means \(v_0 = 0\), and "comes to a stop" means \(v = 0\).

A problem-solving routine

1. Sketch the situation and mark a positive direction. 2. List the knowns, with signs and SI units, including hidden ones. 3. Name the unknown you want. 4. Choose an equation with that unknown and three knowns, and check that the acceleration really is constant. 5. Solve for the unknown in symbols before putting in numbers. 6. Substitute, carrying units, and round only at the end. 7. Ask whether the answer is reasonable: is the sign right, are the units right, and is the size sensible? A car's stopping distance should be tens of metres, not kilometres. Wrong units always mean a mistake, though right units do not prove the answer right.

Worked example: an electric car

An electric car accelerates from rest at a constant \(4.50\ \mathrm{m/s^2}\) until it reaches 27.0 m/s. Find the time taken and the distance covered. 1. Positive is the direction of travel. Knowns: \(v_0 = 0\), \(v = 27.0\) m/s, \(a = 4.50\ \mathrm{m/s^2}\). 2. Time, from \(v = v_0 + at\): \(t = v/a\), so \(t = 27.0 \div 4.50 = 6.00\) s. 3. Distance, from the equation without time: \(\Delta x = v^2/(2a)\), so \(\Delta x = 729 \div 9.00 = 81.0\) m. 4. Check a second way: \(\Delta x = \tfrac{1}{2}(27.0)(6.00) = 81.0\) m, in agreement. 5. Reasonable: about 97 km/h in 6 s suits a quick electric car.

Worked example: stopping distance

A driver moving at 22.0 m/s sees a hazard. Her reaction time is 0.75 s, then she brakes with a constant deceleration of \(6.5\ \mathrm{m/s^2}\). Find the total stopping distance. 1. Reaction stage, constant velocity: \(22.0 \times 0.75 = 16.5\) m. 2. Braking stage, with travel positive: \(v_0 = 22.0\) m/s, \(v = 0\), \(a = -6.5\ \mathrm{m/s^2}\). 3. From \(v^2 = v_0^2 + 2a\Delta x\): \(\Delta x = -v_0^2/(2a)\), which is \(484 \div 13 = 37.2\) m. 4. Total: \(16.5 + 37.2 = 53.7\) m, about 54 m to the two significant figures of the data. 5. Check: braking lasts \(22.0 \div 6.5 = 3.38\) s at an average 11.0 m/s, giving \(11.0 \times 3.38 = 37.2\) m, as before.

Scaling and unreasonable results

The equations show how results scale. Braking distance is \(v_0^2/(2|a|)\), so it grows with the square of the speed: at 11.0 m/s, half the speed above, the braking distance falls to a quarter, 9.3 m, and the total stopping distance to about 18 m. This is why speed limits near schools are so low. Sometimes correct algebra gives an impossible answer because a premise is unrealistic. A cyclist starting from rest and accelerating at \(1.5\ \mathrm{m/s^2}\) for 40 s would reach 60 m/s, over 200 km/h. The equations are fine; the assumption that such an acceleration lasts 40 s is not.

Common mistakes to avoid

First, using these equations when the acceleration is not constant. Second, losing signs: once a direction is positive, a deceleration of a forward-moving object must go in as a negative \(a\). Third, forgetting the hidden knowns, \(v_0 = 0\) from rest and \(v = 0\) when stopped. Fourth, writing \(\Delta x = vt\) for accelerated motion, or forgetting the \(\tfrac{1}{2}\) or the square in \(\tfrac{1}{2}at^2\). Fifth, leaving out the reaction distance in a stopping problem. Sixth, assuming twice the speed means twice the braking distance; it means four times.

Key takeaways

For straight-line motion with constant acceleration, starting the clock at zero: \(v = v_0 + at\) (no \(\Delta x\)); \(\Delta x = \tfrac{1}{2}(v_0 + v)t\) (no \(a\)); \(\Delta x = v_0 t + \tfrac{1}{2}at^2\) (no \(v\)); and \(v^2 = v_0^2 + 2a\Delta x\) (no \(t\)). Know three of the five quantities and you can find the other two. Sketch, choose a positive direction, list knowns with signs, solve symbolically, then check sign, units and size. From rest, displacement grows with time squared; braking distance grows with speed squared; stopping distance adds reaction distance to braking distance.

Flashcards

Flashcard

Key assumption

The acceleration is constant in size and direction

Otherwise split the motion into stages.

Test your understanding

Question 1 of 5

A bus moving at 8.0 m/s accelerates at a constant 1.5 m/s² for 6.0 s. What is its final velocity?

Question 2 of 5

A trolley starts from rest with constant acceleration and rolls 12 m in its first 2.0 s. How far does it roll in its first 6.0 s?

Question 3 of 5

A car travelling at 30 m/s brakes with a constant deceleration of 6.0 m/s². What is its braking distance?

Question 4 of 5

A problem gives an object's initial velocity, final velocity and constant acceleration, and asks for its displacement. Which equation goes straight to the answer?

Question 5 of 5

A driver doubles her speed on the same road. With the same braking deceleration, how does her braking distance change?

← Previous topicNext topic →