Physics › Section B · Kinematics in one and two dimensions › Topic B.3
Acceleration
Any time a velocity changes, whether by speeding up, slowing down or changing direction, there is an acceleration. This topic defines it, explains what its sign means, and clears up the common idea that a negative acceleration always means slowing down.
When velocity changes
In everyday speech, to accelerate means to speed up. Physics uses the word more widely. Acceleration is the rate at which velocity changes, and because velocity is a vector, it can change in three ways: by getting larger, by getting smaller, or by changing direction. A car pulling away from traffic lights, a cyclist braking for a junction and a runner rounding a bend at a steady pace are all accelerating. An object accelerates whenever its velocity is not constant, and only an object moving in a straight line at a steady speed, or staying at rest, has zero acceleration.
Average acceleration
To find an average acceleration, divide the velocity change by the time it took:
The SI unit is the metre per second per second, written \(\mathrm{m/s^2}\). An acceleration of \(3\ \mathrm{m/s^2}\) means the velocity changes by 3 m/s every second. For a feel of sizes: a family car speeding up hard manages about \(3\ \mathrm{m/s^2}\), an emergency stop on a dry road about \(8\ \mathrm{m/s^2}\), and an object falling freely near Earth's surface, with air resistance ignored, \(9.80\ \mathrm{m/s^2}\), a value later topics use often.
Worked example: an electric scooter
With east positive, an electric scooter moving east at 2.0 m/s speeds up to 8.0 m/s east in 4.0 s. Find its average acceleration. 1. Knowns: \(v_i = +2.0\) m/s, \(v_f = +8.0\) m/s, \(\Delta t = 4.0\) s. 2. Change in velocity: \(\Delta v = 8.0 - 2.0 = +6.0\) m/s. 3. Average acceleration: \(\bar{a} = 6.0 \div 4.0 = +1.5\ \mathrm{m/s^2}\), so \(1.5\ \mathrm{m/s^2}\) east. 4. Check: adding 1.5 m/s each second for 4 s gives \(2.0 + 4 \times 1.5 = 8.0\) m/s, the final velocity. The size is about half that of a hard-accelerating car, which is reasonable for a scooter.
Acceleration is a vector
Acceleration points the same way as \(\Delta v\), the velocity change, which is not always the direction of motion. When the scooter speeds up eastward, \(\Delta v\) is eastward and so is the acceleration. When it brakes while still moving east, its velocity is shrinking, so \(\Delta v\) points west, and so does the acceleration, even though the scooter is still travelling east. A change of direction alone also needs an acceleration: a car taking a bend at a constant 15 m/s is accelerating towards the inside of the bend. Motion in circles has its own topic later in the course.
Speeding up or slowing down?
In one dimension, velocity and acceleration each carry a sign, and comparing the two signs tells you what is happening to the speed. If velocity and acceleration have the same sign, the object is speeding up. If they have opposite signs, it is slowing down. The sign of the acceleration on its own tells you only which way the acceleration points, never whether the object is gaining or losing speed. Deceleration means an acceleration opposite to the velocity, so it always reduces the speed. A negative acceleration simply points in the negative direction of your chosen axis.
Deceleration is not always negative
Because the positive direction is your choice, the sign of a deceleration depends on that choice. Take east as positive. A car driving east and braking has \(v > 0\) and \(a < 0\): negative acceleration and deceleration. A car reversing west and braking has \(v < 0\) and \(a > 0\): it is decelerating, yet its acceleration is positive. A car reversing west and speeding up has \(v < 0\) and \(a < 0\): negative acceleration that increases the speed. So "negative acceleration" and "deceleration" are different ideas, and they coincide only when the object moves in the positive direction.
Worked example: four cars, four cases
East is positive, and each change takes 2.0 s. 1. Velocity +10 to +16 m/s: \(\Delta v = +6\) m/s, so \(a = +3.0\ \mathrm{m/s^2}\). Same signs, so speeding up. 2. Velocity +16 to +10 m/s: \(a = -3.0\ \mathrm{m/s^2}\). Opposite signs, so slowing down. 3. Velocity −10 to −16 m/s: \(\Delta v = -16 - (-10) = -6\) m/s, so \(a = -3.0\ \mathrm{m/s^2}\). Same signs, so speeding up, westward. 4. Velocity −16 to −10 m/s: \(a = +3.0\ \mathrm{m/s^2}\). Opposite signs, so slowing down. 5. Check: the speed rises from 10 to 16 m/s in cases 1 and 3, and falls in 2 and 4, matching the sign rule every time.
Worked example: a ball on a ramp
A ball is rolled up a straight ramp, with up the ramp positive. It starts at +3.0 m/s and 2.0 s later is rolling back down at −1.0 m/s. 1. \(\Delta v = -1.0 - 3.0 = -4.0\) m/s. 2. \(\bar{a} = -4.0 \div 2.0 = -2.0\ \mathrm{m/s^2}\). 3. If the acceleration stays at this value throughout, the ball loses 2.0 m/s each second, so after 1.5 s its velocity is \(3.0 - 2.0 \times 1.5 = 0\): it stops for an instant at the top. 4. At that instant the velocity is zero but the acceleration is still \(-2.0\ \mathrm{m/s^2}\), which is why the ball starts back down. 5. Check: speed falls from 3.0 to 0 m/s while velocity and acceleration have opposite signs, then rises while both are negative.
Instantaneous acceleration
Instantaneous acceleration is the acceleration at one moment. It is found in the same way as instantaneous velocity: take the average acceleration over shorter and shorter intervals and see what value it settles towards. When the acceleration is constant, as for the ball on the ramp if friction is small, the average and instantaneous accelerations are the same at every moment. When it varies, as for a car in stop-start traffic, a good approach is to split the motion into stages, each with a nearly constant acceleration, and treat each stage separately.
Common mistakes to avoid
First, equating negative acceleration with slowing down; compare the signs of \(a\) and \(v\) instead. Second, subtracting velocities the wrong way round or dropping a sign: \(\Delta v\) is final minus initial, signs included. Third, thinking that zero velocity means zero acceleration; at the top of the ramp the ball is at rest but still accelerating. Fourth, believing a constant speed means zero acceleration: turning needs an acceleration too. Fifth, writing acceleration in m/s instead of \(\mathrm{m/s^2}\).
Key takeaways
Acceleration is the rate of change of velocity, \(\bar{a} = \Delta v / \Delta t\), in \(\mathrm{m/s^2}\). It is a vector pointing along \(\Delta v\), which need not be the direction of motion, and a change of direction alone means an acceleration. If \(a\) and \(v\) have the same sign the object speeds up; if opposite, it slows down. Deceleration is acceleration opposite to the velocity, and its sign depends on the chosen axis. Zero velocity does not mean zero acceleration. Instantaneous acceleration is the limit of average accelerations over shrinking intervals.
Flashcards
Flashcard
The rate of change of velocity
Test your understanding
Question 1 of 5
A train speeds up in a straight line from 4.0 m/s to 16.0 m/s in 8.0 s. What is its average acceleration?
Question 2 of 5
With east positive, a car is moving west and slowing down. Which describes its acceleration?
Question 3 of 5
An object's velocity changes from +6.0 m/s to −4.0 m/s in 2.5 s. What is its average acceleration?
Question 4 of 5
A ball rolled up a ramp stops for an instant at its highest point before rolling back. At that instant, what is true?
Question 5 of 5
Which of these objects is accelerating?
