Physics › Section I · Temperature, gases, and heat › Topic I.3
Kinetic theory of gases
The ideal gas law was found by measuring gases, but it can also be derived by picturing a gas as countless tiny particles bouncing off the walls. That picture explains where pressure comes from and reveals what temperature really is: a measure of the average kinetic energy of the particles.
A gas as particles in motion
Kinetic theory explains the behaviour of a gas from the motion of its particles. It uses the ideal-gas assumptions of the previous topic, made precise. 1. The gas is a very large number of identical particles moving in random directions. 2. The particles are tiny compared with the distances between them. 3. They exert no forces on each other except during collisions. 4. Their collisions with each other and with the walls are elastic, so kinetic energy is conserved. 5. Newton's laws govern each particle. Each particle that strikes a wall pushes on it briefly, and so many strike every second that the separate pushes merge into a steady force per unit area: the pressure of the gas.
From one impact to the pressure
Take a cube of side \(L\), with \(x\) positive towards one wall. A particle of mass \(m\) with velocity component \(v_x\) bounces back elastically, so its momentum changes by \(-2mv_x\), and by Newton's third law the wall receives \(+2mv_x\). It returns to that wall after crossing the box and back, a time \(2L/v_x\), so its average force on the wall is \(mv_x^2/L\). For \(N\) particles, use the average of \(v_x^2\). Random motion favours no direction, so the average of \(v_x^2\) is one third of the average of \(v^2\). Dividing the force by the area \(L^2\), with \(V = L^3\), gives
What temperature means
Compare that result with \(PV = NkT\). The two right-hand sides must be equal, so \(\frac{1}{3}m\overline{v^2} = kT\), and multiplying by 3/2 gives
The average translational kinetic energy of a gas particle, its energy of moving from place to place, depends only on the absolute temperature. At 300 K it is \(6.21 \times 10^{-21}\) J, whatever the gas. Temperature is therefore a measure of the average translational kinetic energy of the particles. For a monatomic gas such as helium, this motion is all the internal energy there is: \(U = \frac{3}{2}NkT = \frac{3}{2}nRT\), about 3.74 kJ for 1 mol at 300 K.
Worked example: doubling the energy
Find the average translational kinetic energy of an air molecule at 20.0 °C, and the temperature at which it would be twice as large. 1. Convert: \(T = 293.15\) K. 2. Substitute: \(\overline{KE} = \frac{3}{2}(1.381 \times 10^{-23})(293.15)\). 3. Evaluate: \(\overline{KE} = 6.07 \times 10^{-21}\) J. 4. The energy is proportional to the kelvin temperature, so doubling it needs \(T = 2 \times 293.15 = 586.30\) K. 5. Convert back: \(586.30 - 273.15 = 313.15\), about 313 °C, not 40.0 °C. 6. Check: the energy is tiny next to everyday energies, which is why you do not feel single molecules striking your skin.
The root-mean-square speed
Setting \(\frac{1}{2}m\overline{v^2} = \frac{3}{2}kT\) and solving gives a typical particle speed, the root-mean-square speed. As its name says, you square every speed, average the squares, then take the root.
The first form uses the mass of one particle, \(m\), in kilograms. The second uses the molar mass \(M\) in kg/mol, since \(m = M/N_A\) and \(R = N_A k\). Either way, the units reduce to \(\sqrt{\text{J/kg}}\), which is m/s. The rms speed is a little larger than the ordinary average speed, because squaring gives extra weight to the fastest particles.
Worked example: how fast is argon?
Find the rms speed of argon atoms, molar mass 39.95 g/mol, at 300 K. 1. Mass of one atom:
2. Substitute into the first form:
3. Check with the second form: \(\sqrt{3(8.314)(300)/0.03995} = 433\) m/s, in agreement. 4. Sense check: this is comparable with sound in air, 343 m/s at 20 °C, as it should be: sound is passed on by molecular collisions, so in any gas it travels somewhat slower than \(v_{\text{rms}}\). Leaving \(M\) in g/mol would give a speed \(\sqrt{1000}\), about 32 times, too small.
Lighter and hotter means faster
Because \(v_{\text{rms}}\) is proportional to \(\sqrt{T/m}\), two trends follow. At one temperature, every gas has the same average kinetic energy, so lighter particles must move faster: hydrogen molecules, \(M = 2.016\) g/mol, outpace oxygen molecules, 32.00 g/mol, by \(\sqrt{32.00/2.016} = 3.98\), almost exactly 4. For one gas, the speed grows only as the square root of the kelvin temperature: to double it you must quadruple \(T\). Nitrogen at 20.0 °C has \(v_{\text{rms}} = 511\) m/s, so air molecules at room temperature move at roughly 500 m/s; doubling that would need \(4 \times 293.15\) K, about 899 °C.
A spread of speeds
Collisions keep changing each particle's speed, so a gas always holds a range of speeds, described by the Maxwell-Boltzmann distribution. Its graph rises from zero to a peak at the most probable speed, then tails off slowly, because a few particles move several times faster than typical. The most probable, mean and rms speeds come in the ratio 1.41 : 1.60 : 1.73, each multiplied by \(\sqrt{kT/m}\). Heating shifts the whole curve to higher speeds and spreads it out, so the peak drops. Despite such speeds, a smell crosses a room slowly: each air molecule travels only about 70 nm between collisions and changes direction billions of times a second.
Worked example: helium leaking into space
In the thin upper atmosphere the temperature can reach about 1000 K. Compare the rms speed of helium atoms there, \(M = 4.003\) g/mol, with Earth's escape speed of 11.2 km/s. 1. Substitute:
2. Evaluate: \(v_{\text{rms}} = 2.50 \times 10^{3}\) m/s, or 2.50 km/s. 3. Compare: \(2.50/11.2 = 0.22\), so a typical atom moves at only 22% of escape speed. 4. Interpret: the fast tail of the distribution still holds a few atoms above 11.2 km/s, and the high-flying ones that are not stopped by a collision escape. Over billions of years this drains away light gases, while heavier nitrogen, at 944 m/s, stays.
Common mistakes to avoid
First, using Celsius temperatures; both \(\overline{KE} = \frac{3}{2}kT\) and \(v_{\text{rms}}\) need kelvins. Second, putting molar mass in g/mol into \(\sqrt{3RT/M}\); it must be in kg/mol. Third, mixing \(k\) with a molar mass or \(R\) with the mass of one particle. Fourth, thinking heavier particles have more kinetic energy at the same temperature; the average is the same, so they move more slowly. Fifth, expecting doubling \(T\) to double the speed; it multiplies it by \(\sqrt{2}\). Sixth, imagining every particle moves at the rms speed.
Key takeaways
Kinetic theory treats a gas as tiny particles in random motion that collide elastically; pressure comes from their impacts on the walls. The model gives PV = (1/3)Nm(v²)avg, and comparing with PV = NkT shows that the average translational kinetic energy is (3/2)kT: temperature measures average particle kinetic energy. The rms speed is v_rms = √(3kT/m) = √(3RT/M), proportional to √T and to 1/√m. Speeds follow the Maxwell-Boltzmann distribution, whose fast tail lets light gases slowly escape from planets.
Flashcards
Flashcard
Explains gas behaviour from the motion of its particles
Test your understanding
Question 1 of 5
A gas is at 127 °C. Find the average translational kinetic energy of one of its molecules.
Question 2 of 5
What is the rms speed of nitrogen molecules, N₂ (M = 28.01 g/mol), at 400 K?
Question 3 of 5
Hydrogen, H₂ (2.016 g/mol), and oxygen, O₂ (32.00 g/mol), are at the same temperature. How does the rms speed of the hydrogen molecules compare with that of the oxygen molecules?
Question 4 of 5
A gas is heated from 300 K to 1200 K. By what factor does the rms speed of its particles increase?
Question 5 of 5
In the upper atmosphere the rms speed of helium is well below Earth's escape speed, yet Earth slowly loses helium to space. Why?
