Physics › Section R · Electromagnetic waves and geometric optics › Topic R.6

Image formation by lenses

Cameras, spectacles, magnifying glasses and your own eyes all form images with lenses. A few ray rules and one equation predict where every image appears, how big it is, and whether it can be caught on a screen.

Two kinds of lens

A lens is glass or plastic with curved faces that forms images by refracting light at both faces. A converging lens, thicker in the middle than at the edges, bends rays towards its axis, the line through its centre at right angles to it. A diverging lens, thinner in the middle, bends rays away from the axis; spectacles for short sight use them. These statements assume the lens has a higher index of refraction than its surroundings, as glass in air does. This topic treats thin lenses: lenses thin enough that each ray can be taken to bend once, at the lens's centre plane.

Focal points and power

Rays arriving parallel to the axis of a converging lens cross at one point on the far side, the focal point F. Its distance from the lens is the focal length \(f\). A thin lens has a focal point on each side, both at distance \(f\). Parallel rays leaving a diverging lens spread out as if they came from a focal point on the near side, and its focal length counts as negative. The stronger a lens bends light, the shorter its focal length, so lens strength is given as power:

P = \frac{1}{f}

With \(f\) in metres, \(P\) is in dioptres (D), where 1 D = 1 m⁻¹. A spectacle prescription of −2.50 D is a diverging lens with \(f = -0.400\) m.

Ray diagrams in words

To locate an image, trace two or three easy rays from the top of the object, and find where they meet. For a converging lens: a ray parallel to the axis leaves through the far focal point; a ray through the centre of the lens carries straight on; and a ray through the near focal point leaves parallel to the axis. For a diverging lens: a ray parallel to the axis leaves on a line traced back to the near focal point; a ray through the centre carries straight on; and a ray heading for the far focal point leaves parallel to the axis. The image of the top of the object is where the outgoing rays cross, or where their backward extensions cross if the rays spread apart.

Real and virtual images

If the outgoing rays really cross, they form a real image on the far side of the lens, and a screen placed there shows a sharp picture, as in a projector, a camera or your eye. Real images from a single lens are always inverted. If the outgoing rays spread apart, they only appear to come from a point on the object's side. That is a virtual image: no light reaches that point, so no screen can catch it, but your eye sees it by looking through the lens. Virtual images from a single lens are always upright.

The thin-lens equation and its signs

Geometry of the ray diagram gives the thin-lens equation and the magnification:

\frac{1}{f} = \frac{1}{d_o} + \frac{1}{d_i} \qquad m = \frac{h_i}{h_o} = -\frac{d_i}{d_o}

Here \(d_o\) is the object distance and \(d_i\) the image distance, both measured from the lens, and \(h_o\) and \(h_i\) are the heights. The sign convention: \(d_o\) is positive for an ordinary object; \(d_i\) is positive for a real image on the far side and negative for a virtual image on the object's side; \(f\) takes a plus sign for converging lenses and a minus sign for diverging ones. A positive \(m\) means an upright image and a negative \(m\) an inverted one; \(|m| > 1\) means larger than the object.

Worked example: a real image

A candle flame 4.50 cm tall stands 30.0 cm from a converging lens with \(f = 12.0\) cm. Find the image. 1. Rearrange: \(1/d_i = 1/f - 1/d_o\). 2. Substitute: \(1/d_i = 1/12.0 - 1/30.0 = 0.05000\) cm⁻¹, so \(d_i = +20.0\) cm, a real image on the far side. 3. Magnification: \(m = -20.0/30.0 = -0.667\). 4. Height: \(h_i = m h_o = -3.00\) cm, so it is inverted and smaller. 5. Check with rays: the flame is beyond twice the focal length (24.0 cm), and the parallel ray and the central ray cross between 12.0 and 24.0 cm beyond the lens, below the axis. A screen at 20.0 cm shows a small, upside-down flame.

Worked example: a magnifying glass

A stamp is held 4.00 cm from a magnifying glass with \(f = 6.00\) cm. Find the power of the lens and the image. 1. Power: \(P = 1/0.0600\ \text{m} = 16.7\) D. 2. Image: \(1/d_i = 1/6.00 - 1/4.00 = -0.08333\) cm⁻¹, so \(d_i = -12.0\) cm. 3. The negative sign means a virtual image on the same side as the stamp. 4. Magnification: \(m = -(-12.0)/4.00 = +3.00\), upright and three times as large. 5. Check with rays: the parallel ray leaves through the far focal point and the central ray carries straight on; the two spread apart, and traced backwards they meet behind the stamp, farther from the lens, as the 12.0 cm says.

Worked example: a diverging lens

An object stands 30.0 cm from a diverging lens with \(f = -15.0\) cm. Find the power and the image. 1. Power: \(P = 1/(-0.150\ \text{m}) = -6.67\) D. 2. Image: \(1/d_i = 1/(-15.0) - 1/30.0 = -0.1000\) cm⁻¹, so \(d_i = -10.0\) cm, a virtual image on the object's side. 3. Magnification: \(m = -(-10.0)/30.0 = +0.333\), upright and one-third the height. 4. Check: a diverging lens alone always gives a virtual, upright, smaller image that lies closer to the lens than the object, and 10.0 cm is closer than 30.0 cm. Forgetting the negative focal length would give \(d_i = +30.0\) cm, a real image that this lens cannot form.

Where the image goes

For a converging lens, the image depends on where the object stands. Beyond \(2f\), the image is real, inverted and smaller, lying between \(f\) and \(2f\) on the far side, as in a camera. At exactly \(2f\), it is real, inverted and the same size, at \(2f\). Between \(f\) and \(2f\), it is real, inverted and larger, beyond \(2f\), as in a projector. At \(f\), the rays leave parallel and no image forms. Inside \(f\), the image is virtual, upright and larger: a magnifier. A diverging lens has only one case: whatever the object distance, the image is virtual, upright, smaller and inside the focal length.

Common mistakes to avoid

First, dropping signs: a diverging lens needs a negative \(f\), and a negative \(d_i\) means a virtual image, not an error. Second, adding instead of subtracting: \(1/d_i = 1/f - 1/d_o\), not \(1/f + 1/d_o\). Third, forgetting to take the reciprocal at the end: \(1/d_i = 0.05000\) cm⁻¹ means \(d_i = 20.0\) cm. Fourth, finding power with \(f\) in centimetres: convert to metres first. Fifth, dropping the minus sign in \(m = -d_i/d_o\), which hides whether the image is inverted.

Key takeaways

Converging lenses are thicker in the middle and have positive f; diverging lenses are thinner in the middle and have negative f. Power is P = 1/f in dioptres, with f in metres. The thin-lens equation 1/f = 1/d_o + 1/d_i and the magnification m = −d_i/d_o predict every image. Positive d_i means a real image on the far side; negative d_i means a virtual image on the object's side. Positive m is upright, negative m inverted. A converging lens forms real, inverted images of objects beyond f and virtual, upright, enlarged images inside f. A diverging lens always forms virtual, upright, smaller images.

Flashcards

Flashcard

Converging lens

Thicker in the middle; bends parallel rays to a real focal point

Focal length positive.

Test your understanding

Question 1 of 5

An object is 20.0 cm from a converging lens of focal length 15.0 cm. Using the sign convention in this topic, what is the image distance?

Question 2 of 5

A diverging spectacle lens has a focal length of magnitude 40.0 cm. Using the sign convention in this topic, what is its power?

Question 3 of 5

Using the sign convention in this topic, a thin lens gives dᵢ = −8.0 cm and m = +2.0. Which describes the image?

Question 4 of 5

An object is 12.0 cm from a diverging lens of focal length −6.00 cm. What is the magnification?

Question 5 of 5

A ray from the top of an object passes through the near focal point of a converging lens on its way to the lens. How does it leave the lens?

← Previous topicNext topic →