Physics › Section B · Kinematics in one and two dimensions › Topic B.6

Graphs of one-dimensional motion

A single graph can hold a whole journey: where an object was, how fast it went and when it sped up or turned round. Learning to read slopes and areas lets you pull every one of those facts out of a picture.

Why graph motion?

Equations describe motion compactly, but graphs show its whole story at a glance. Motion along a line is drawn on three kinds of graph, each with time on the horizontal axis: position, velocity and acceleration against time. Two geometric ideas unlock all three. The slope of a graph tells you how fast the plotted quantity is changing. The area between a graph and the time axis tells you how much of something has built up. Ask of any motion graph: what do its slope and its area mean?

Position-time graphs: slope is velocity

On a graph of position \(x\) against time \(t\), the slope between two points is \(\frac{\Delta x}{\Delta t}\), which is exactly the average velocity. A straight line means the velocity is constant. A steeper line means a faster object, a line sloping down means motion in the negative direction, and a horizontal line means the object is at rest. The units of the slope are the units of the vertical axis divided by those of the horizontal axis, metres per second, which is a quick check that slope really is velocity. The intercept on the vertical axis is the starting position.

Worked example: a steady walker

A position-time graph for a walker is a straight line from \(x = 4.0\) m at \(t = 0\) to \(x = 19.0\) m at \(t = 5.0\) s. Find her velocity and write her position as a function of time. 1. Rise: \(\Delta x = 19.0 - 4.0 = 15.0\) m. 2. Run: \(\Delta t = 5.0\) s. 3. Slope: \(v = \frac{15.0\ \mathrm{m}}{5.0\ \mathrm{s}} = 3.0\) m/s, positive, so she walks in the positive direction. 4. The intercept is 4.0 m, so \(x = 4.0 + 3.0t\), with \(x\) in metres and \(t\) in seconds. 5. Check: at \(t = 5.0\) s this gives \(4.0 + 15.0 = 19.0\) m, matching the graph.

Curved position-time graphs

When the velocity changes, the position-time graph curves. A straight line joining two points on the curve, called a secant, has a slope equal to the average velocity between those times. The instantaneous velocity at a single moment is the slope of the tangent line, the straight line that just touches the curve at that point and runs in the same direction as it. A curve that bends upward, its slope rising as time goes on, shows velocity increasing in the positive sense, so the acceleration is positive. A curve bending downward shows negative acceleration. Where the tangent is horizontal, the object is momentarily at rest.

Worked example: a tangent slope

A cart starts from rest and its position-time graph follows \(x = 2.0t^2\), in metres and seconds. A tangent drawn at \(t = 3.0\) s touches the curve at \(x = 18.0\) m and meets the time axis at \(t = 1.5\) s. Find the cart's velocity at 3.0 s and its average velocity over the first 3.0 s. 1. Tangent slope: \(v = \frac{18.0 - 0}{3.0 - 1.5} = 12\) m/s. 2. Secant from the origin: \(\bar{v} = \frac{18.0}{3.0} = 6.0\) m/s. 3. Check: comparing \(x = 2.0t^2\) with \(x = \tfrac{1}{2}at^2\) gives \(a = 4.0\ \mathrm{m/s^2}\), so \(v = at = 12\) m/s. Starting from rest at constant acceleration, the average velocity should be half the final velocity, and it is.

Velocity-time graphs: slope is acceleration

On a graph of velocity against time, the slope is \(\frac{\Delta v}{\Delta t}\), the acceleration, in \(\mathrm{m/s^2}\). A horizontal line means constant velocity and zero acceleration. A straight sloping line means constant acceleration, which is the case the constant-acceleration equations describe. The intercept on the velocity axis is the initial velocity. Where the line crosses the time axis, the velocity changes sign: the object stops for an instant and reverses direction. Being on the time axis does not mean the acceleration is zero; that depends on the slope, not the value.

Area under a velocity-time graph

The area between a velocity-time graph and the time axis equals the displacement. For constant velocity this is simply a rectangle, \(v \times \Delta t\). For a sloping line, split the region into rectangles and triangles, or use the area of a trapezium. Area above the time axis counts as positive displacement, and area below it counts as negative. Adding the signed areas gives the displacement; adding their sizes, all taken as positive, gives the total distance travelled. The units confirm the idea: metres per second times seconds gives metres.

Worked example: a short car journey

A car's velocity-time graph rises in a straight line from 0 to 12 m/s over 4.0 s, stays at 12 m/s for 6.0 s, then falls in a straight line to 0 over 3.0 s. Find each acceleration and the total displacement. 1. Slopes: \(\frac{12}{4.0} = 3.0\ \mathrm{m/s^2}\), then 0, then \(\frac{0 - 12}{3.0} = -4.0\ \mathrm{m/s^2}\). 2. Areas: triangle \(\tfrac{1}{2}(4.0)(12) = 24\) m, rectangle \((6.0)(12) = 72\) m, triangle \(\tfrac{1}{2}(3.0)(12) = 18\) m. 3. Displacement: \(24 + 72 + 18 = 114\) m. 4. Check: the average velocity is \(\frac{114}{13} = 8.77\) m/s, sensibly below the top speed of 12 m/s.

Acceleration-time graphs

On a graph of acceleration against time, constant acceleration is a horizontal line. The area under this graph is the change in velocity, because \(\Delta v = a\,\Delta t\). An acceleration of 2.5 m/s² lasting 4.0 s, for instance, adds 10 m/s to the velocity. A pattern runs through all three graphs: going from position to velocity to acceleration, you take slopes; going back the other way, you take areas.

One motion, three graphs

Picture a ball thrown straight up, with up positive and no air resistance. Its position-time graph is a curve shaped like an upside-down U, highest at the top of the flight, where the tangent is horizontal. Its velocity-time graph is a straight line with slope \(-9.80\ \mathrm{m/s^2}\), starting positive, crossing zero at the moment the ball is highest and finishing negative. Its acceleration-time graph is a horizontal line at \(-9.80\ \mathrm{m/s^2}\) for the whole flight. Checking one graph against another catches many errors.

Common mistakes to avoid

First, reading a graph as a picture of the path: a position-time graph sloping upward does not mean the object is climbing a hill. Second, confusing graph types; check the vertical axis label before you interpret anything. Third, reading the value when you need the slope: a velocity of zero at one instant does not mean zero acceleration. Fourth, forgetting that area below the time axis is negative displacement. Fifth, using the slope of a secant when the question asks for the velocity at one instant, which needs a tangent.

Key takeaways

Slope and area are the two keys. On a position-time graph, slope is velocity: a secant gives average velocity and a tangent gives instantaneous velocity. A straight line means constant velocity; a curve means acceleration. On a velocity-time graph, slope is acceleration, and the signed area under the line is displacement, with area below the axis negative. Crossing the time axis means reversing direction. On an acceleration-time graph, area is the change in velocity. Moving from position to velocity to acceleration, take slopes; moving back, take areas.

Flashcards

Flashcard

Slope of x-t graph

Velocity

Rise in metres over run in seconds.

Test your understanding

Question 1 of 5

A position-time graph is a straight line from x = 10 m at t = 0 to x = −5 m at t = 5.0 s. What is the object's velocity?

Question 2 of 5

A velocity-time graph rises in a straight line from 2.0 m/s at t = 0 to 14.0 m/s at t = 4.0 s. What is the displacement over these 4.0 s?

Question 3 of 5

On a velocity-time graph, a straight sloping line crosses the time axis from positive to negative at t = 3 s. What happens at t = 3 s?

Question 4 of 5

An object moves at +6.0 m/s for 4.0 s, then at −3.0 m/s for 2.0 s. What is its displacement over the 6.0 s?

Question 5 of 5

On a curved position-time graph, the tangent at t = 4.0 s passes through (4.0 s, 20 m) and (2.0 s, 0 m). The object was at x = 0 at t = 0. What is its velocity at t = 4.0 s?

← Previous topicNext topic →