Physics › Section B · Kinematics in one and two dimensions › Topic B.7
Two-dimensional motion and adding vectors
Real journeys rarely run along a single straight line. To describe motion across a field, a city or the sky, you need to add quantities that point in different directions, and vectors are the tool that does it.
Motion in a plane
Walk four blocks east and then three blocks north, and you have travelled seven blocks. Your displacement, though, is a single straight arrow from start to finish, five blocks long and pointing somewhere between north and east. In one dimension a plus or minus sign was enough to give a direction. In two dimensions you need an angle as well, so displacement, velocity and acceleration must be handled as vectors, each with a magnitude and a direction. A powerful idea makes two-dimensional motion manageable: motion along perpendicular directions, such as east and north, can be analysed separately and then combined.
Describing a vector
A vector is drawn as an arrow whose length shows its magnitude and whose direction shows its direction. Printed symbols use bold or an arrow, \(\vec{A}\), and the magnitude alone is written \(A\). Always state the direction against a named reference. In this topic, angles are measured anticlockwise from the positive \(x\) axis, which points east, with the positive \(y\) axis pointing north. Compass language says the same thing in words: 30° north of east is 30° from the \(x\) axis, and 45° north of west is 135°. Two vectors are equal when they have the same magnitude and direction, so an arrow can be slid anywhere without changing it.
Adding vectors graphically
The head-to-tail method adds vectors with a scale drawing. Draw the first vector to scale at its angle. Start the second arrow exactly where the first one ends, and chain any others on in the same way. The resultant, the sum, is the single arrow running from the starting point of the chain to its final tip. Measure its length with a ruler and convert using the scale, and measure its angle with a protractor. The order does not matter: \(\vec{A} + \vec{B} = \vec{B} + \vec{A}\), because both routes end at the same point. A careful drawing is accurate to a few percent, which makes it an excellent check on calculations.
Subtracting and scaling vectors
The negative of a vector, \(-\vec{B}\), has the same magnitude but points the opposite way. Subtraction is defined as adding the negative:
so reverse \(\vec{B}\) and then add head to tail. Multiplying a vector by a positive number changes only its length: \(3\vec{A}\) is three times as long as \(\vec{A}\) and points the same way. Multiplying by a negative number also reverses the direction. Subtraction appears constantly in physics, for example in the change of velocity, \(\Delta\vec{v} = \vec{v}_f - \vec{v}_i\).
Resolving a vector into components
Any vector can be split into two perpendicular components that add, head to tail, to make it. For a vector of magnitude \(A\) at angle \(\theta\) measured from the positive \(x\) axis,
Components carry signs: a vector pointing into the second quadrant, up and to the left, has negative \(A_x\) and positive \(A_y\). These formulas need \(\theta\) measured from the \(x\) axis. If an angle is given from the \(y\) axis, such as 20° east of north, either convert it to 70° from the \(x\) axis or swap the roles of sine and cosine.
From components back to a vector
Given components, Pythagoras's theorem gives the magnitude and the inverse tangent gives the direction:
Take care with the angle. A calculator's inverse tangent only returns angles between −90° and 90°, so it cannot tell the second quadrant from the fourth, or the first from the third. For components \((-6.0, -8.0)\) m the calculator gives 53.1°, but the vector points down and to the left, so the true direction is \(180° + 53.1° = 233.1°\). Always sketch the components first and check which quadrant the vector lies in.
Adding vectors with components
The analytical method replaces the drawing with arithmetic. Resolve every vector into components, add all the \(x\) components to get \(R_x\), add all the \(y\) components to get \(R_y\), then rebuild the resultant from \(R_x\) and \(R_y\). This works because perpendicular components do not affect one another: the eastward parts add like ordinary numbers, and so do the northward parts. The method is exact, handles any number of vectors and is the one used in almost every calculation from here on.
Worked example: a survey drone
A drone flies 120 m at 30.0°, then 80.0 m at 135.0°, angles anticlockwise from east. Find its displacement. 1. First leg: \(A_x = 120\cos 30.0° = 103.9\) m, \(A_y = 120\sin 30.0° = 60.0\) m. 2. Second leg: \(B_x = 80.0\cos 135.0° = -56.6\) m, \(B_y = 80.0\sin 135.0° = 56.6\) m. 3. Add: \(R_x = 47.4\) m, \(R_y = 116.6\) m. 4. Magnitude: \(R = \sqrt{47.35^2 + 116.57^2} = 126\) m. 5. Both components are positive, so the first quadrant is right: \(\theta = \tan^{-1}\frac{116.57}{47.35} = 67.9°\). 6. Check by the law of cosines: the two directions differ by 105°, so the triangle's angle between the legs is 75.0°, and
which is \(15{,}830\ \mathrm{m^2}\), giving \(R = 126\) m.
Worked example: turning a corner
A car drives at 15.0 m/s east, then turns onto a road heading north and continues at 15.0 m/s. Find its change in velocity. 1. Write \(\Delta\vec{v} = \vec{v}_f - \vec{v}_i\), with east as \(+x\) and north as \(+y\). 2. Components: \(\vec{v}_f = (0, 15.0)\) m/s and \(\vec{v}_i = (15.0, 0)\) m/s. 3. Subtract: \(\Delta\vec{v} = (-15.0, 15.0)\) m/s. 4. Magnitude: \(\sqrt{15.0^2 + 15.0^2} = 21.2\) m/s. 5. The components put it in the second quadrant, at 135°, which is 45° north of west. 6. Check graphically: reversing the eastward arrow and adding the northward one head to tail gives an arrow pointing up and to the left. The speed never changed, yet the velocity changed by 21.2 m/s.
Common mistakes to avoid
First, adding magnitudes: 30 m east plus 40 m north is 50 m, not 70 m. Second, using cosine for the \(x\) component when the angle is measured from the \(y\) axis. Third, trusting the calculator's inverse tangent without checking the quadrant from the signs of the components. Fourth, dropping signs, so that a westward component is added as if it pointed east. Fifth, giving an angle with no reference: "40°" alone could mean north of east, east of north or something else, so always name the axis.
Key takeaways
In two dimensions, displacement, velocity and acceleration are vectors with a magnitude and a direction, and directions need a stated reference axis. Head-to-tail addition draws the resultant from the first tail to the last head, in any order. Subtracting a vector means adding its reverse. Components are A cos θ and A sin θ for θ measured from the x axis, and they rebuild the vector through Pythagoras and the inverse tangent, after a quadrant check. To add vectors analytically, add the x components and the y components separately.
Flashcards
Flashcard
A quantity with magnitude and direction
Test your understanding
Question 1 of 5
A velocity of 20.0 m/s points at 30.0° above the positive x axis. What are its components?
Question 2 of 5
A hiker walks 30 m east and then 40 m north. What is her displacement?
Question 3 of 5
A vector has components Aₓ = −5.0 m and Aᵧ = 12.0 m. What is its direction, measured anticlockwise from the positive x axis?
Question 4 of 5
Vector A is 6.0 m north and vector B is 8.0 m east. What is A − B?
Question 5 of 5
Which statement about adding vectors by the head-to-tail method is true?
