Physics › Section C · Forces and Newton's laws › Topic C.4
Normal, tension, and other forces
Floors push up, ropes pull, and slopes split your weight in two. This topic gives the rules for the everyday contact forces, so you can draw any free-body diagram and solve it with Newton's second law.
A catalogue of everyday forces
Most problems in mechanics use a handful of named forces, each with its own rule for direction. Weight, \(w = mg\), always points straight down. The normal force is a surface's push, perpendicular to the surface and away from it. Tension is a rope's pull, along the rope and away from the object. Friction acts along a surface and air resistance opposes motion through the air; both have topics of their own later in this section. This topic covers the normal force and tension in detail.
Where the normal force comes from
Put a heavy box on a table and the tabletop bends very slightly, like a stiff spring or a trampoline. The bent surface pushes back, and the more it is squashed, the harder it pushes, until its push balances the load. That push is the normal force, written \(F_N\); "normal" means perpendicular. Its size is not fixed: the surface supplies whatever push is needed to stop the object sinking into it, up to the point where the surface breaks. Some books write the normal force as N, which is easy to confuse with the newton, its unit.
The normal force is not always mg
On a level floor, with only the weight and the normal force acting vertically and no vertical acceleration, the second law gives \(F_N = mg\). Change any of those conditions and the answer changes. Press down on a 5.00 kg box with an extra 20.0 N and the floor must push up with \(49.0 + 20.0 = 69.0\) N. Pull up on it with 20.0 N instead and the floor needs only 29.0 N. Always find the normal force from the second law applied perpendicular to the surface, never by assuming it equals the weight.
Worked example: apparent weight in a lift
A 55.0 kg student stands on bathroom scales in a lift. The scales read the normal force, the student's apparent weight. Take up as positive. 1. Second law: \(F_N - mg = ma\), so
2. Accelerating upwards at 1.20 m/s²: \(F_N = 55.0 \times 11.0 = 605\) N. 3. Moving at constant velocity, up or down: \(a = 0\), so \(F_N = 539\) N, the true weight. 4. Accelerating downwards at 1.20 m/s²: \(a = -1.20\), so \(F_N = 55.0 \times 8.60 = 473\) N. 5. Check: if the cable snapped, \(a = -g\) and the scales would read zero; the student's weight would still be 539 N.
Weight on a slope
For an object on a slope at angle \(\theta\) to the horizontal, tilt the axes: one along the slope and one perpendicular to it. The normal force and any friction then lie along the axes, and only the weight needs splitting. The angle between the weight and the perpendicular axis equals \(\theta\), so the weight's components are
with \(w_{\parallel}\) pointing down the slope. A check on which is which: at \(\theta = 0\) the whole weight presses into the surface, and as the slope steepens towards 90° it all acts along the slope.
Normal force and acceleration on a slope
Nothing accelerates into or out of the slope, so the perpendicular forces balance. With no other forces pressing on the object, that gives
which is less than the weight on any slope. If the slope is frictionless, the only force along it is \(mg\sin\theta\), so the second law gives \(ma = mg\sin\theta\), and the mass cancels:
A heavy crate and a light one slide down the same frictionless ramp with the same acceleration.
Worked example: a crate on a ramp
A 12.0 kg crate slides down a frictionless ramp inclined at 25.0°. Find the normal force and the acceleration. 1. Weight: \(w = 12.0 \times 9.80 = 117.6\) N. 2. Perpendicular to the ramp: \(F_N = 117.6 \cos 25.0^\circ = 107\) N. 3. Along the ramp: \(mg\sin\theta = 117.6 \sin 25.0^\circ = 49.7\) N. 4. Acceleration: \(a = 49.7 / 12.0 = 4.14\) m/s² down the ramp, matching \(9.80 \sin 25.0^\circ = 4.14\) m/s². 5. Check: the normal force is less than the weight and the acceleration is less than \(g\), as they must be on a slope.
Tension
Tension is the pull carried by a rope, string, cable or chain. A flexible connector can only pull, never push, and it pulls along its own length, away from the object it is attached to. Most problems assume a massless rope. Any piece of such a rope needs zero net force, since \(F = ma\) with \(m = 0\), so the tension is the same all along it, and the rope pulls equally hard on the objects at its two ends. For an object hanging at rest from a single vertical rope, the second law gives \(T = mg\): a 5.00 kg bag of sand needs a tension of 49.0 N.
Changing direction with a pulley
Ropes are often run over pulleys to turn a force through an angle, as on a gym's cable machine or a flagpole. An ideal pulley is massless and frictionless, and it changes only the direction of the tension, not its size: the rope pulls with the same tension on both sides. In a tug of war at a standstill, if each team pulls with 250 N, the tension is 250 N, not 500 N, exactly as if one end were tied to a wall.
Worked example: a lantern on a sagging wire
A 4.00 kg lantern hangs from the middle of a light wire, and each half of the wire slopes up at 10.0° above the horizontal. Find the tension. 1. Horizontally, the two halves pull outwards with \(T\cos\theta\) each and must balance, so their tensions are equal. 2. Vertically, two upward components support the weight: \(2T\sin\theta = mg\). 3. Rearrange:
4. Check: this is almost three times the weight. A shallower wire needs even more tension, and a perfectly straight one would need infinite tension, so every loaded wire sags.
Common mistakes to avoid
First, assuming \(F_N = mg\) on slopes, in lifts or when other forces press or pull. Second, swapping sine and cosine on a slope: the cosine goes with the perpendicular component. Third, confusing the symbol for the normal force with the newton. Fourth, drawing tension as a push, or pointing it towards the object instead of along the rope away from it. Fifth, doubling the tension because a rope has two ends. Sixth, calling the normal force the third-law partner of the weight; as the last topic showed, they act on the same object.
Key takeaways
The normal force is a surface's perpendicular push, produced by tiny deformations; find it from the second law, not by assuming mg. In a lift, F(N) = m(g + a) with up positive. On a slope, the weight splits into mg sin θ along the slope and mg cos θ into it, so F(N) = mg cos θ and, without friction, a = g sin θ for any mass. Tension pulls along a rope and is the same throughout a massless rope, even over ideal pulleys. A load on a sagging wire needs T = mg / (2 sin θ).
Flashcards
Flashcard
A surface's push, perpendicular to the surface
Test your understanding
Question 1 of 5
A 70.0 kg passenger stands on scales in a lift that is accelerating downwards at 2.00 m/s². What do the scales read?
Question 2 of 5
A 5.00 kg block rests on a slope inclined at 30.0° to the horizontal. What is the normal force on it?
Question 3 of 5
An 8.00 kg box slides down a frictionless ramp inclined at 20.0°. What is its acceleration?
Question 4 of 5
Two people pull on opposite ends of a light rope, each with 250 N, and nothing moves. What is the tension in the rope?
Question 5 of 5
A 2.00 kg bird feeder hangs from the middle of a light wire, and each half of the wire slopes up at 30.0° above the horizontal. What is the tension in the wire?
